Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 6e1364fe4558f248222a0223e06fd0e73e72bf0a / . / include / configs / stout.h
blob: 0a02216cd53e52d2cd962930b7e0f05ecfe8487e [file] [log] [blame]
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]1/*
2 * include/configs/stout.h
3 * This file is Stout board configuration.
4 *
5 * Copyright (C) 2015 Renesas Electronics Europe GmbH
6 * Copyright (C) 2015 Renesas Electronics Corporation
7 * Copyright (C) 2015 Cogent Embedded, Inc.
8 *
9 * SPDX-License-Identifier: GPL-2.0
10 */
11
12#ifndef __STOUT_H
13#define __STOUT_H
14
15#undef DEBUG
Nobuhiro Iwamatsu1cc95f62015-10-10 05:58:28 +0900[diff] [blame]16#define CONFIG_ARCH_RMOBILE_BOARD_STRING "Stout"
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]17
18#include "rcar-gen2-common.h"
19
Nobuhiro Iwamatsu1cc95f62015-10-10 05:58:28 +0900[diff] [blame]20#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]21#define CONFIG_SYS_TEXT_BASE 0xB0000000
22#else
23#define CONFIG_SYS_TEXT_BASE 0xE8080000
24#endif
25
26/* STACK */
27#if defined(CONFIGF_RMOBILE_EXTRAM_BOOT)
28#define CONFIG_SYS_INIT_SP_ADDR 0xB003FFFC
29#else
30#define CONFIG_SYS_INIT_SP_ADDR 0xE827FFFC
31#endif
32#define STACK_AREA_SIZE 0xC000
33#define LOW_LEVEL_MERAM_STACK \
34 (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
35
36/* MEMORY */
37#define RCAR_GEN2_SDRAM_BASE 0x40000000
38#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024)
39#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
40
41/* SCIF */
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]42#define CONFIG_SCIF_A
43
44/* SPI */
45#define CONFIG_SPI
46#define CONFIG_SH_QSPI
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]47#define CONFIG_SPI_FLASH_QUAD
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]48
49/* SH Ether */
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]50#define CONFIG_SH_ETHER_USE_PORT 0
51#define CONFIG_SH_ETHER_PHY_ADDR 0x1
52#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
53#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
54#define CONFIG_SH_ETHER_CACHE_WRITEBACK
55#define CONFIG_SH_ETHER_CACHE_INVALIDATE
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]56#define CONFIG_BITBANGMII
57#define CONFIG_BITBANGMII_MULTI
58
59/* I2C */
60#define CONFIG_SYS_I2C
61#define CONFIG_SYS_I2C_RCAR
62#define CONFIG_SYS_RCAR_I2C0_SPEED 400000
63#define CONFIG_SYS_RCAR_I2C1_SPEED 400000
64#define CONFIG_SYS_RCAR_I2C2_SPEED 400000
65#define CONFIG_SYS_RCAR_I2C3_SPEED 400000
66#define CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS 4
67
68#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
69
70/* Board Clock */
71#define RMOBILE_XTAL_CLK 20000000u
72#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
73#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
74#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2)
75#define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2)
76#define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15)
77#define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12)
78
79#define CONFIG_SYS_TMU_CLK_DIV 4
80
81/* USB */
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]82#define CONFIG_USB_EHCI_RMOBILE
83#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]84
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]85/* Module stop status bits */
86/* INTC-RT */
87#define CONFIG_SMSTP0_ENA 0x00400000
88/* MSIF, SCIFA0 */
89#define CONFIG_SMSTP2_ENA 0x00002010
90/* INTC-SYS, IRQC */
91#define CONFIG_SMSTP4_ENA 0x00000180
92
93/* SDHI */
94#define CONFIG_SH_SDHI_FREQ 97500000
95
96#endif /* __STOUT_H */