blob: c0e8b5adc8816133c5ede9be238450c1fab58b95 [file] [log] [blame]
Mike Frysinger581e97d2010-09-19 16:28:40 -04001/*
2 * U-boot - Configuration file for BF527 SDP board
3 */
4
5#ifndef __CONFIG_BF527_SDP_H__
6#define __CONFIG_BF527_SDP_H__
7
8#include <asm/config-pre.h>
9
10
11/*
12 * Processor Settings
13 */
Mike Frysingerfbcf8e82010-12-23 14:58:37 -050014#define CONFIG_BFIN_CPU bf527-0.2
Mike Frysinger581e97d2010-09-19 16:28:40 -040015#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
16
17
18/*
19 * Clock Settings
20 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
21 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
22 */
23/* CONFIG_CLKIN_HZ is any value in Hz */
24#define CONFIG_CLKIN_HZ 24000000
25/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
26/* 1 = CLKIN / 2 */
27#define CONFIG_CLKIN_HALF 0
28/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
29/* 1 = bypass PLL */
30#define CONFIG_PLL_BYPASS 0
31/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
32/* Values can range from 0-63 (where 0 means 64) */
33#define CONFIG_VCO_MULT 25
34/* CCLK_DIV controls the core clock divider */
35/* Values can be 1, 2, 4, or 8 ONLY */
36#define CONFIG_CCLK_DIV 1
37/* SCLK_DIV controls the system clock divider */
38/* Values can range from 1-15 */
39#define CONFIG_SCLK_DIV 5
40
41#define CONFIG_PLL_LOCKCNT_VAL 0x0200
42#define CONFIG_PLL_CTL_VAL 0x2a00
43#define CONFIG_VR_CTL_VAL 0x7090
44
45
46/*
47 * Memory Settings
48 */
49#define CONFIG_MEM_ADD_WDTH 9
50#define CONFIG_MEM_SIZE 32
51
52#define CONFIG_EBIU_SDRRC_VAL 0x00FE
53#define CONFIG_EBIU_SDGCTL_VAL 0x8011998d
54
55#define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL)
56#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL)
57#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL)
58
59#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
60#define CONFIG_SYS_MALLOC_LEN (640 * 1024)
61
62
63/*
64 * Flash Settings
65 */
66#define CONFIG_FLASH_CFI_DRIVER
67#define CONFIG_SYS_FLASH_BASE 0x20000000
68#define CONFIG_SYS_FLASH_CFI
69#define CONFIG_SYS_FLASH_PROTECTION
70#define CONFIG_SYS_MAX_FLASH_BANKS 1
71#define CONFIG_SYS_MAX_FLASH_SECT 259
72
73
74/*
75 * SPI Settings
76 */
77#define CONFIG_BFIN_SPI
78#define CONFIG_ENV_SPI_MAX_HZ 30000000
79#define CONFIG_SF_DEFAULT_SPEED 30000000
80#define CONFIG_SPI_FLASH
81#define CONFIG_SPI_FLASH_ALL
82
83
84/*
85 * Env Storage Settings
86 */
87#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
88#define CONFIG_ENV_IS_IN_SPI_FLASH
89#define CONFIG_ENV_OFFSET 0x10000
90#define CONFIG_ENV_SIZE 0x2000
91#define CONFIG_ENV_SECT_SIZE 0x10000
92#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
93#else
94#define CONFIG_ENV_IS_IN_FLASH
95#define CONFIG_ENV_OFFSET 0x4000
96#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
97#define CONFIG_ENV_SIZE 0x2000
98#define CONFIG_ENV_SECT_SIZE 0x2000
99#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
100#endif
101
102
103/*
104 * I2C Settings
105 */
106#define CONFIG_BFIN_TWI_I2C 1
107#define CONFIG_HARD_I2C 1
108
109
110/*
111 * Misc Settings
112 */
113#define CONFIG_MISC_INIT_R
114#define CONFIG_UART_CONSOLE 0
115
116
117/*
118 * Pull in common ADI header for remaining command/environment setup
119 */
120#include <configs/bfin_adi_common.h>
121
122#endif