| Pascal Linder | c0fed3a | 2019-06-18 13:27:47 +0200 | [diff] [blame] | 1 | # SPDX-License-Identifier: GPL-2.0+ |
| 2 | # |
| 3 | # Copyright (C) 2019, Pascal Linder <pascal.linder@edu.hefr.ch> |
| 4 | |
| 5 | config VENDOR_KM |
| 6 | bool |
| 7 | help |
| 8 | Selected by any KM board to have additional configurations. |
| 9 | |
| 10 | if VENDOR_KM |
| 11 | |
| Pascal Linder | 707f06f | 2019-07-09 09:28:20 +0200 | [diff] [blame^] | 12 | menu "KM Board Setup" |
| 13 | |
| 14 | config KM_PNVRAM |
| 15 | hex "Pseudo RAM" |
| 16 | default 0x80000 |
| 17 | help |
| 18 | Start address of the pseudo non-volatile RAM for application. |
| 19 | |
| 20 | config KM_PHRAM |
| 21 | hex "Physical RAM" |
| 22 | default 0x17F000 if ARM |
| 23 | default 0x100000 if PPC |
| 24 | help |
| 25 | Start address of the physical RAM, which is the mounted /var folder. |
| 26 | |
| 27 | config KM_RESERVED_PRAM |
| 28 | hex "Reserved RAM" |
| 29 | default 0x801000 if KIRKWOOD |
| 30 | default 0x0 if MPC83xx |
| 31 | default 0x1000 if MPC85xx |
| 32 | help |
| 33 | Reserved physical RAM area at the end of memory for special purposes. |
| 34 | |
| 35 | config KM_CRAMFS_ADDR |
| 36 | hex "CRAMFS Address" |
| 37 | default 0x2400000 if KIRKWOOD |
| 38 | default 0xC00000 if MPC83xx |
| 39 | default 0x2000000 if MPC85xx |
| 40 | help |
| 41 | Start address of the CRAMFS containing the Linux kernel. |
| 42 | |
| 43 | config KM_KERNEL_ADDR |
| 44 | hex "Kernel Load Address" |
| 45 | default 0x2000000 if KIRKWOOD |
| 46 | default 0x400000 if MPC83xx |
| 47 | default 0x1000000 if MPC85xx |
| 48 | help |
| 49 | Address where to load Linux kernel in RAM. |
| 50 | |
| 51 | config KM_FDT_ADDR |
| 52 | hex "FDT Load Address" |
| 53 | default 0x23E0000 if KIRKWOOD |
| 54 | default 0xB80000 if MPC83xx |
| 55 | default 0x1F80000 if MPC85xx |
| 56 | help |
| 57 | Address where to load flattened device tree in RAM. |
| 58 | |
| 59 | config KM_CONSOLE_TTY |
| 60 | string "KM Console" |
| 61 | default "ttyS0" |
| 62 | help |
| 63 | TTY console to use on board. |
| 64 | |
| 65 | config KM_COMMON_ETH_INIT |
| 66 | bool "Common Ethernet Initialization" |
| 67 | default y if KIRKWOOD || MPC83xx |
| 68 | default n if MPC85xx |
| 69 | help |
| 70 | Use the Ethernet initialization implemented in common code, which |
| 71 | detects if a Piggy board is present. |
| 72 | |
| 73 | config PIGGY_MAC_ADRESS_OFFSET |
| 74 | int "Piggy Address Offset" |
| 75 | default 0 |
| 76 | help |
| 77 | MAC address offset for the Piggy board. |
| 78 | |
| 79 | config KM_MVEXTSW_ADDR |
| 80 | hex "Marvell Switch Address" |
| 81 | depends on MV88E6352_SWITCH |
| 82 | default 0x10 |
| 83 | help |
| 84 | Address of external Marvell switch. |
| 85 | |
| 86 | config KM_IVM_BUS |
| 87 | int "IVM I2C Bus" |
| 88 | default 1 if KIRKWOOD || MPC85xx |
| 89 | default 2 if MPC83xx |
| 90 | help |
| 91 | Identifier number of I2C bus, where the inventory EEPROM is connected to. |
| 92 | |
| 93 | config SYS_IVM_EEPROM_ADR |
| 94 | hex "IVM I2C Address" |
| 95 | default 0x50 |
| 96 | help |
| 97 | I2C address of the EEPROM containing the inventory. |
| 98 | |
| 99 | config SYS_IVM_EEPROM_MAX_LEN |
| 100 | hex "IVM Length" |
| 101 | default 0x400 |
| 102 | help |
| 103 | Maximum length of inventory in EEPROM. |
| 104 | |
| 105 | config SYS_IVM_EEPROM_PAGE_LEN |
| 106 | hex "IVM Page Size" |
| 107 | default 0x100 |
| 108 | help |
| 109 | Page size of inventory in EEPROM. |
| 110 | |
| Pascal Linder | c0fed3a | 2019-06-18 13:27:47 +0200 | [diff] [blame] | 111 | source "board/keymile/km83xx/Kconfig" |
| 112 | source "board/keymile/kmp204x/Kconfig" |
| 113 | source "board/keymile/km_arm/Kconfig" |
| 114 | |
| Pascal Linder | 707f06f | 2019-07-09 09:28:20 +0200 | [diff] [blame^] | 115 | endmenu |
| 116 | |
| Pascal Linder | c0fed3a | 2019-06-18 13:27:47 +0200 | [diff] [blame] | 117 | endif |