blob: 8d98d57f88ec6bfbaaaa06bd17e16368a5b902a3 [file] [log] [blame]
Stefan Roese029faf32010-04-27 11:37:28 +02001/*
2 * (C) Copyright 2009-2010
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * icon.h - configuration for Mosaixtech ICON (440SPe)
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 */
34#define CONFIG_ICON 1 /* Board is icon */
35#define CONFIG_4xx 1 /* ... PPC4xx family */
36#define CONFIG_440 1 /* ... PPC440 family */
37#define CONFIG_440SPE 1 /* Specifc SPe support */
Wolfgang Denk2ae18242010-10-06 09:05:45 +020038
39#define CONFIG_SYS_TEXT_BASE 0xFFFA0000
40
Stefan Roese029faf32010-04-27 11:37:28 +020041#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
42#define CONFIG_SYS_4xx_RESET_TYPE 0x2 /* use chip reset on this board */
43
44/*
45 * Include common defines/options for all AMCC eval boards
46 */
47#define CONFIG_HOSTNAME icon
48#include "amcc-common.h"
49
50#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */
51#define CONFIG_BOARD_EARLY_INIT_R /* Call board_early_init_r */
52
53/*
54 * Base addresses -- Note these are effective addresses where the
55 * actual resources get mapped (not physical addresses)
56 */
57#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* later mapped to this addr */
Stefan Roese029faf32010-04-27 11:37:28 +020058#define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */
59
60#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */
61#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
62#define CONFIG_SYS_PCI_TARGBASE CONFIG_SYS_PCI_MEMBASE
63
64#define CONFIG_SYS_PCIE_MEMBASE 0xb0000000 /* mapped PCIe memory */
65#define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* incr for PCIe port */
66#define CONFIG_SYS_PCIE_BASE 0xe0000000 /* PCIe UTL regs */
67
68#define CONFIG_SYS_PCIE0_CFGBASE 0xc0000000
69#define CONFIG_SYS_PCIE1_CFGBASE 0xc1000000
70#define CONFIG_SYS_PCIE2_CFGBASE 0xc2000000
71#define CONFIG_SYS_PCIE0_XCFGBASE 0xc3000000
72#define CONFIG_SYS_PCIE1_XCFGBASE 0xc3001000
73#define CONFIG_SYS_PCIE2_XCFGBASE 0xc3002000
74
75/* base address of inbound PCIe window */
76#define CONFIG_SYS_PCIE_INBOUND_BASE 0x0000000000000000ULL
77
78/* System RAM mapped to PCI space */
79#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
80#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
81#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
82
83#define CONFIG_SYS_ACE_BASE 0xfb000000 /* Xilinx ACE CF */
84#define CONFIG_SYS_ACE_BASE_PHYS_H 0x4
85#define CONFIG_SYS_ACE_BASE_PHYS_L 0xfe000000
86
87#define CONFIG_SYS_FLASH_SIZE (64 << 20)
88#define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space */
89#define CONFIG_SYS_FLASH_BASE_PHYS_H 0x4
90#define CONFIG_SYS_FLASH_BASE_PHYS_L 0xEC000000
91#define CONFIG_SYS_FLASH_BASE_PHYS (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) | \
92 (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
93
94/*
95 * Initial RAM & stack pointer (placed in internal SRAM)
96 */
97#define CONFIG_SYS_TEMP_STACK_OCM 1
98#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
99#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Init RAM */
100#define CONFIG_SYS_INIT_RAM_END 0x2000 /* end used area */
101#define CONFIG_SYS_GBL_DATA_SIZE 128 /* sizeof init data */
102
103#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
104 CONFIG_SYS_GBL_DATA_SIZE)
Michael Zaidman800eb092010-09-20 08:51:53 +0200105#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
Stefan Roese029faf32010-04-27 11:37:28 +0200106
107/*
108 * Serial Port
109 */
Stefan Roese550650d2010-09-20 16:05:31 +0200110#define CONFIG_CONS_INDEX 1 /* Use UART0 */
Stefan Roese029faf32010-04-27 11:37:28 +0200111#undef CONFIG_SYS_EXT_SERIAL_CLOCK
112
113/*
114 * DDR2 SDRAM
115 */
116#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
117#define SPD_EEPROM_ADDRESS { 0x51 } /* SPD I2C SPD addresses */
118#define CONFIG_DDR_ECC /* with ECC support */
119#define CONFIG_DDR_RQDC_FIXED 0x80000038 /* fixed value for RQDC */
120
121/*
122 * I2C
123 */
124#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
125
126#define CONFIG_I2C_MULTI_BUS
127#define CONFIG_SYS_SPD_BUS_NUM 0 /* The I2C bus for SPD */
128
129#define CONFIG_SYS_I2C_MULTI_EEPROMS
130#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
131#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
132#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
133#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
134
135/* I2C bootstrap EEPROM */
136#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x50
137#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0
138#define CONFIG_4xx_CONFIG_BLOCKSIZE 8
139
140/* I2C RTC */
141#define CONFIG_RTC_M41T11
142#define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */
143#define CONFIG_SYS_I2C_RTC_ADDR 0x68
144#define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with linux */
145
146/*
Anatolij Gustschin86caca12010-05-26 10:38:59 +0200147 * Video options
148 */
149#define CONFIG_VIDEO
150
151#ifdef CONFIG_VIDEO
152#define CONFIG_VIDEO_SM501
153#define CONFIG_VIDEO_SM501_32BPP
154#define CONFIG_VIDEO_SM501_PCI
155#define VIDEO_FB_LITTLE_ENDIAN
156#define CONFIG_CFB_CONSOLE
157#define CONFIG_VIDEO_LOGO
158#define CONFIG_CONSOLE_EXTRA_INFO
159#define CONFIG_VGA_AS_SINGLE_DEVICE
160#define CONFIG_VIDEO_SW_CURSOR
161#define CONFIG_VIDEO_BMP_RLE8
162#define CONFIG_SPLASH_SCREEN
163#define CFG_CONSOLE_IS_IN_ENV
164#endif
165
166/*
Stefan Roese029faf32010-04-27 11:37:28 +0200167 * Environment
168 */
169#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment uses flash */
170
171/*
172 * Default environment variables
173 */
174#define CONFIG_EXTRA_ENV_SETTINGS \
175 CONFIG_AMCC_DEF_ENV \
176 CONFIG_AMCC_DEF_ENV_POWERPC \
177 CONFIG_AMCC_DEF_ENV_NOR_UPD \
178 "kernel_addr=fc000000\0" \
179 "fdt_addr=fc1e0000\0" \
180 "ramdisk_addr=fc200000\0" \
181 "pciconfighost=1\0" \
182 "pcie_mode=RP:RP:RP\0" \
183 ""
184
185/*
186 * Commands additional to the ones defined in amcc-common.h
187 */
188#define CONFIG_CMD_CHIP_CONFIG
189#define CONFIG_CMD_DATE
190#define CONFIG_CMD_EXT2
191#define CONFIG_CMD_FAT
192#define CONFIG_CMD_PCI
193#define CONFIG_CMD_SDRAM
194#define CONFIG_CMD_SNTP
Anatolij Gustschin86caca12010-05-26 10:38:59 +0200195#ifdef CONFIG_VIDEO
196#define CONFIG_CMD_BMP
197#endif
Stefan Roese029faf32010-04-27 11:37:28 +0200198
199#define CONFIG_IBM_EMAC4_V4 /* 440SPe has this EMAC version */
200#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
201#define CONFIG_HAS_ETH0
202#define CONFIG_PHY_RESET /* reset phy upon startup */
203#define CONFIG_PHY_RESET_DELAY 1000
204#define CONFIG_CIS8201_PHY /* Enable RGMII mode for Cicada phy */
205#define CONFIG_PHY_GIGE /* Include GbE speed/duplex det. */
206
207/*
208 * FLASH related
209 */
210#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
211#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
212#define CONFIG_SYS_FLASH_CFI_AMD_RESET /* Use AMD (Spansion) reset cmd */
213#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* use status poll method */
214
215#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
216#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of banks */
217#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors*/
218
219#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
220#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
221
222#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
223#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector */
224
225#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
226#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
227#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Env Sector */
228
229/* Address and size of Redundant Environment Sector */
230#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
231#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
232
233/*
234 * PCI stuff
235 */
236/* General PCI */
237#define CONFIG_PCI /* include pci support */
238#define CONFIG_PCI_PNP /* do pci plug-and-play */
239#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
240#define CONFIG_PCI_CONFIG_HOST_BRIDGE
241#define CONFIG_PCI_BOOTDELAY 1000 /* enable pci bootdelay variable*/
242
243/* Board-specific PCI */
244#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */
245#undef CONFIG_SYS_PCI_MASTER_INIT
246
247#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
248#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
249
250/*
251 * Xilinx System ACE support
252 */
253#define CONFIG_SYSTEMACE /* Enable SystemACE support */
254#define CONFIG_SYS_SYSTEMACE_WIDTH 16 /* Data bus width is 16 */
255#define CONFIG_SYS_SYSTEMACE_BASE CONFIG_SYS_ACE_BASE
256#define CONFIG_DOS_PARTITION
257
258/*
259 * External Bus Controller (EBC) Setup
260 */
261
262/* Memory Bank 0 (Flash) initialization */
263#define CONFIG_SYS_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \
264 EBC_BXAP_TWT_ENCODE(7) | \
265 EBC_BXAP_BCE_DISABLE | \
266 EBC_BXAP_BCT_2TRANS | \
267 EBC_BXAP_CSN_ENCODE(0) | \
268 EBC_BXAP_OEN_ENCODE(0) | \
269 EBC_BXAP_WBN_ENCODE(0) | \
270 EBC_BXAP_WBF_ENCODE(0) | \
271 EBC_BXAP_TH_ENCODE(0) | \
272 EBC_BXAP_RE_DISABLED | \
273 EBC_BXAP_SOR_DELAYED | \
274 EBC_BXAP_BEM_WRITEONLY | \
275 EBC_BXAP_PEN_DISABLED)
276#define CONFIG_SYS_EBC_PB0CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \
277 EBC_BXCR_BS_64MB | \
278 EBC_BXCR_BU_RW | \
279 EBC_BXCR_BW_16BIT)
280
281/* Memory Bank 1 (Xilinx System ACE controller) initialization */
282#define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_DISABLED | \
283 EBC_BXAP_TWT_ENCODE(4) | \
284 EBC_BXAP_BCE_DISABLE | \
285 EBC_BXAP_BCT_2TRANS | \
286 EBC_BXAP_CSN_ENCODE(0) | \
287 EBC_BXAP_OEN_ENCODE(0) | \
288 EBC_BXAP_WBN_ENCODE(0) | \
289 EBC_BXAP_WBF_ENCODE(0) | \
290 EBC_BXAP_TH_ENCODE(0) | \
291 EBC_BXAP_RE_DISABLED | \
292 EBC_BXAP_SOR_NONDELAYED | \
293 EBC_BXAP_BEM_WRITEONLY | \
294 EBC_BXAP_PEN_DISABLED)
295#define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_ACE_BASE_PHYS_L) | \
296 EBC_BXCR_BS_1MB | \
297 EBC_BXCR_BU_RW | \
298 EBC_BXCR_BW_16BIT)
299
300/*
301 * Initialize EBC CONFIG -
302 * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
303 * default value : 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
304 */
305#define CONFIG_SYS_EBC_CFG (EBC_CFG_LE_UNLOCK | \
306 EBC_CFG_PTD_ENABLE | \
307 EBC_CFG_RTC_16PERCLK | \
308 EBC_CFG_ATC_PREVIOUS | \
309 EBC_CFG_DTC_PREVIOUS | \
310 EBC_CFG_CTC_PREVIOUS | \
311 EBC_CFG_OEO_PREVIOUS | \
312 EBC_CFG_EMC_DEFAULT | \
313 EBC_CFG_PME_DISABLE | \
314 EBC_CFG_PR_16)
315
316/*
317 * GPIO Setup
318 */
319#define CONFIG_SYS_GPIO_PCIE_PRESENT0 17
320#define CONFIG_SYS_GPIO_PCIE_PRESENT1 21
321#define CONFIG_SYS_GPIO_PCIE_PRESENT2 23
322#define CONFIG_SYS_GPIO_RS232_FORCEOFF 30
323
324#define CONFIG_SYS_PFC0 (GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT0) | \
325 GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT1) | \
326 GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT2) | \
327 GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF))
328#define CONFIG_SYS_GPIO_OR GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF)
329#define CONFIG_SYS_GPIO_TCR GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF)
330#define CONFIG_SYS_GPIO_ODR 0
331
332#endif /* __CONFIG_H */