blob: 4a1cedec0fe8dfdb9f46a74a1faafd3af42ca240 [file] [log] [blame]
Daniel Gorsulowski44d80252010-01-25 10:50:41 +01001/*
2 * (C) Copyright 2010
3 * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
4 * esd electronic system design gmbh <www.esd.eu>
5 *
6 * (C) Copyright 2007-2008
7 * Stelian Pop <stelian.pop@leadtechdesign.com>
8 * Lead Tech Design <www.leadtechdesign.com>
9 *
10 * Configuation settings for the esd OTC570 board.
11 *
12 * See file CREDITS for list of people who contributed to this
13 * project.
14 *
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License as
17 * published by the Free Software Foundation; either version 2 of
18 * the License, or (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
28 * MA 02111-1307 USA
29 */
30
31#ifndef __CONFIG_H
32#define __CONFIG_H
33
34/* Common stuff */
35#define CONFIG_OTC570 1 /* Board is esd OTC570 */
36#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
37#define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */
Daniel Gorsulowski9f07ded2010-08-09 11:17:13 +020038#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */
Daniel Gorsulowski44d80252010-01-25 10:50:41 +010039#define CONFIG_SYS_HZ 1000 /* decrementer freq */
40#define CONFIG_DISPLAY_BOARDINFO 1
41#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */
42#define CONFIG_PREBOOT /* enable preboot variable */
43#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
44#define CONFIG_SETUP_MEMORY_TAGS 1
45#define CONFIG_INITRD_TAG 1
46#define CONFIG_SERIAL_TAG 1
47#define CONFIG_REVISION_TAG 1
48#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */
49
50#define CONFIG_SKIP_LOWLEVEL_INIT
51#define CONFIG_SKIP_RELOCATE_UBOOT
52#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
53
54#define CONFIG_ARCH_CPU_INIT
55
56/*
57 * Hardware drivers
58 */
Daniel Gorsulowski6258b042010-02-11 14:57:04 +010059#define CONFIG_AT91_GPIO 1
Daniel Gorsulowski44d80252010-01-25 10:50:41 +010060
61/* Console output */
62#define CONFIG_ATMEL_USART 1
63#undef CONFIG_USART0
64#undef CONFIG_USART1
65#undef CONFIG_USART2
66#define CONFIG_USART3 1 /* USART 3 is DBGU */
67
68#define CONFIG_BOOTDELAY 3
69#define CONFIG_ZERO_BOOTDELAY_CHECK 1
70
71/* LCD */
72#define CONFIG_LCD 1
73#define LCD_BPP LCD_COLOR8
74
75#undef CONFIG_SPLASH_SCREEN
76
77#ifndef CONFIG_SPLASH_SCREEN
78#define CONFIG_LCD_LOGO 1
79#define CONFIG_LCD_INFO 1
80#undef CONFIG_LCD_INFO_BELOW_LOGO
81#endif /* CONFIG_SPLASH_SCREEN */
82
83#undef LCD_TEST_PATTERN
84#define CONFIG_SYS_WHITE_ON_BLACK 1
85#define CONFIG_ATMEL_LCD 1
86#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
87#define CONFIG_OTC570_LCD_BASE 0x23E00000 /* LCD is in SDRAM */
88#define CONFIG_CMD_BMP 1
89
90/* RTC and I2C stuff */
91#define CONFIG_RTC_DS1338 1
92#define CONFIG_SYS_I2C_RTC_ADDR 0x68
93#undef CONFIG_HARD_I2C
94#define CONFIG_SOFT_I2C 1
95#define CONFIG_SYS_I2C_SPEED 100000
96#define CONFIG_SYS_I2C_SLAVE 0x7F
97
98#ifdef CONFIG_SOFT_I2C
99#define CONFIG_I2C_CMD_TREE 1
100#define CONFIG_I2C_MULTI_BUS 1
Daniel Gorsulowski6258b042010-02-11 14:57:04 +0100101/* Configure data and clock pins for pio */
Daniel Gorsulowski44d80252010-01-25 10:50:41 +0100102#define I2C_INIT { \
Daniel Gorsulowski6258b042010-02-11 14:57:04 +0100103 at91_set_pio_output(AT91_PIO_PORTB, 4, 0); \
104 at91_set_pio_output(AT91_PIO_PORTB, 5, 0); \
Daniel Gorsulowski44d80252010-01-25 10:50:41 +0100105}
Matthias Fuchsfb508b82010-03-24 10:16:20 +0100106#define I2C_SOFT_DECLARATIONS
Daniel Gorsulowski44d80252010-01-25 10:50:41 +0100107/* Configure data pin as output */
Daniel Gorsulowski6258b042010-02-11 14:57:04 +0100108#define I2C_ACTIVE at91_set_pio_output(AT91_PIO_PORTB, 4, 0)
Daniel Gorsulowski44d80252010-01-25 10:50:41 +0100109/* Configure data pin as input */
Daniel Gorsulowski6258b042010-02-11 14:57:04 +0100110#define I2C_TRISTATE at91_set_pio_input(AT91_PIO_PORTB, 4, 0)
Daniel Gorsulowski44d80252010-01-25 10:50:41 +0100111/* Read data pin */
Daniel Gorsulowski6258b042010-02-11 14:57:04 +0100112#define I2C_READ at91_get_pio_value(AT91_PIO_PORTB, 4)
Daniel Gorsulowski44d80252010-01-25 10:50:41 +0100113/* Set data pin */
Daniel Gorsulowski6258b042010-02-11 14:57:04 +0100114#define I2C_SDA(bit) at91_set_pio_value(AT91_PIO_PORTB, 4, bit)
Daniel Gorsulowski44d80252010-01-25 10:50:41 +0100115/* Set clock pin */
Daniel Gorsulowski6258b042010-02-11 14:57:04 +0100116#define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTB, 5, bit)
117#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
Daniel Gorsulowski44d80252010-01-25 10:50:41 +0100118#endif /* CONFIG_SOFT_I2C */
119
120#define CONFIG_BOOTDELAY 3
121#define CONFIG_ZERO_BOOTDELAY_CHECK 1
122
123/*
124 * BOOTP options
125 */
126#define CONFIG_BOOTP_BOOTFILESIZE 1
127#define CONFIG_BOOTP_BOOTPATH 1
128#define CONFIG_BOOTP_GATEWAY 1
129#define CONFIG_BOOTP_HOSTNAME 1
130
131/*
132 * Command line configuration.
133 */
134#include <config_cmd_default.h>
Daniel Gorsulowski44d80252010-01-25 10:50:41 +0100135#undef CONFIG_CMD_FPGA
136#undef CONFIG_CMD_LOADS
137#undef CONFIG_CMD_IMLS
138
139#define CONFIG_CMD_PING 1
140#define CONFIG_CMD_DHCP 1
141#define CONFIG_CMD_NAND 1
142#define CONFIG_CMD_USB 1
143#define CONFIG_CMD_I2C 1
144#define CONFIG_CMD_DATE 1
145
146/* LED */
147#define CONFIG_AT91_LED 1
148
149/* SDRAM */
150#define CONFIG_NR_DRAM_BANKS 1
151#define PHYS_SDRAM 0x20000000
152
153/* DataFlash */
154#define CONFIG_ATMEL_DATAFLASH_SPI
155#define CONFIG_HAS_DATAFLASH 1
156#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
157#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
158#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
159#define AT91_SPI_CLK 15000000
160#define DATAFLASH_TCSS (0x1a << 16)
161#define DATAFLASH_TCHS (0x1 << 24)
162
163/* NOR flash is not populated, disable it */
164#define CONFIG_SYS_NO_FLASH 1
165
166/* NAND flash */
167#ifdef CONFIG_CMD_NAND
168#define CONFIG_NAND_ATMEL
169#define CONFIG_SYS_MAX_NAND_DEVICE 1
170#define CONFIG_SYS_NAND_BASE 0x40000000
171#define CONFIG_SYS_NAND_DBW_8 1
172/* our ALE is AD21 */
173#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
174/* our CLE is AD22 */
175#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
Daniel Gorsulowski6258b042010-02-11 14:57:04 +0100176#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
177#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
Daniel Gorsulowski44d80252010-01-25 10:50:41 +0100178#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
179#endif
180
181/* Ethernet */
182#define CONFIG_MACB 1
183#define CONFIG_RMII 1
184#define CONFIG_NET_MULTI 1
185#define CONFIG_NET_RETRY_COUNT 20
186#undef CONFIG_RESET_PHY_R
187
188/* USB */
189#define CONFIG_USB_ATMEL
190#define CONFIG_USB_OHCI_NEW 1
191#define CONFIG_DOS_PARTITION 1
192#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
193#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
194#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
195#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
196#define CONFIG_USB_STORAGE 1
197#define CONFIG_CMD_FAT 1
198
199#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
200
201#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
202#define CONFIG_SYS_MEMTEST_END 0x23e00000
203
204#define CONFIG_SYS_USE_DATAFLASH 1
205#undef CONFIG_SYS_USE_NANDFLASH
206
207/* CAN */
208#define CONFIG_AT91_CAN 1
209
210/* hw-controller addresses */
211#define CONFIG_ET1100_BASE 0x70000000
212
213/* bootstrap + u-boot + env in dataflash on CS0 */
214#define CONFIG_ENV_IS_IN_DATAFLASH 1
215#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
216 0x8400)
217#define CONFIG_ENV_OFFSET 0x4200
218#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
219 CONFIG_ENV_OFFSET)
220#define CONFIG_ENV_SIZE 0x4200
221
222#define CONFIG_BAUDRATE 115200
223#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
224
225#define CONFIG_SYS_PROMPT "=> "
226#define CONFIG_SYS_CBSIZE 256
227#define CONFIG_SYS_MAXARGS 16
228#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
229 sizeof(CONFIG_SYS_PROMPT) + 16)
230#define CONFIG_SYS_LONGHELP 1
231#define CONFIG_CMDLINE_EDITING 1
232
233/*
234 * Size of malloc() pool
235 */
236#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \
237 128*1024, 0x1000)
238#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
239
240#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
241
242#ifdef CONFIG_USE_IRQ
243#error CONFIG_USE_IRQ not supported
244#endif
245
246#endif