blob: c7c5d40adac72f6cb2aaefbe246cc1f824302843 [file] [log] [blame]
Tom Rini57cd6812015-07-31 19:55:12 -04001/*
2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "dra72x.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12
13/ {
14 model = "TI DRA722";
15 compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
16
17 chosen {
18 stdout-path = &uart1;
Mugunthan V N6c3401a2015-12-24 16:08:19 +053019 tick-timer = &timer2;
Tom Rini57cd6812015-07-31 19:55:12 -040020 };
21
22 memory {
23 device_type = "memory";
24 reg = <0x80000000 0x40000000>; /* 1024 MB */
25 };
26
27 aliases {
28 display0 = &hdmi0;
29 };
30
31 evm_3v3: fixedregulator-evm_3v3 {
32 compatible = "regulator-fixed";
33 regulator-name = "evm_3v3";
34 regulator-min-microvolt = <3300000>;
35 regulator-max-microvolt = <3300000>;
36 };
37
38 extcon_usb1: extcon_usb1 {
39 compatible = "linux,extcon-usb-gpio";
40 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
41 };
42
43 extcon_usb2: extcon_usb2 {
44 compatible = "linux,extcon-usb-gpio";
45 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
46 };
47
48 hdmi0: connector {
49 compatible = "hdmi-connector";
50 label = "hdmi";
51
52 type = "a";
53
54 port {
55 hdmi_connector_in: endpoint {
56 remote-endpoint = <&tpd12s015_out>;
57 };
58 };
59 };
60
61 tpd12s015: encoder {
62 compatible = "ti,tpd12s015";
63
64 pinctrl-names = "default";
65 pinctrl-0 = <&tpd12s015_pins>;
66
67 gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
68 <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
69 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
70
71 ports {
72 #address-cells = <1>;
73 #size-cells = <0>;
74
75 port@0 {
76 reg = <0>;
77
78 tpd12s015_in: endpoint {
79 remote-endpoint = <&hdmi_out>;
80 };
81 };
82
83 port@1 {
84 reg = <1>;
85
86 tpd12s015_out: endpoint {
87 remote-endpoint = <&hdmi_connector_in>;
88 };
89 };
90 };
91 };
92};
93
94&dra7_pmx_core {
95 i2c1_pins: pinmux_i2c1_pins {
96 pinctrl-single,pins = <
97 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
98 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
99 >;
100 };
101
102 i2c5_pins: pinmux_i2c5_pins {
103 pinctrl-single,pins = <
104 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
105 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
106 >;
107 };
108
109 nand_default: nand_default {
110 pinctrl-single,pins = <
111 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
112 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
113 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
114 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
115 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
116 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
117 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
118 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
119 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
120 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
121 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
122 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
123 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
124 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
125 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
126 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
127 0xb4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
128 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
129 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
130 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
131 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
132 0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */
133 >;
134 };
135
136 usb1_pins: pinmux_usb1_pins {
137 pinctrl-single,pins = <
138 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
139 >;
140 };
141
142 usb2_pins: pinmux_usb2_pins {
143 pinctrl-single,pins = <
144 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
145 >;
146 };
147
148 tps65917_pins_default: tps65917_pins_default {
149 pinctrl-single,pins = <
150 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
151 >;
152 };
153
154 mmc1_pins_default: mmc1_pins_default {
155 pinctrl-single,pins = <
156 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
157 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
158 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
159 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
160 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
161 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
162 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
163 >;
164 };
165
166 mmc2_pins_default: mmc2_pins_default {
167 pinctrl-single,pins = <
168 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
169 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
170 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
171 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
172 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
173 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
174 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
175 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
176 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
177 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
178 >;
179 };
180
181 dcan1_pins_default: dcan1_pins_default {
182 pinctrl-single,pins = <
183 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
184 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
185 >;
186 };
187
188 dcan1_pins_sleep: dcan1_pins_sleep {
189 pinctrl-single,pins = <
190 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
191 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
192 >;
193 };
194
195 qspi1_pins: pinmux_qspi1_pins {
196 pinctrl-single,pins = <
197 0x74 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
198 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
199 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
200 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
201 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
202 0x88 (PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
203 0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
204 >;
205 };
206
207 hdmi_pins: pinmux_hdmi_pins {
208 pinctrl-single,pins = <
209 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
210 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
211 >;
212 };
213
214 tpd12s015_pins: pinmux_tpd12s015_pins {
215 pinctrl-single,pins = <
216 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
217 >;
218 };
219};
220
221&i2c1 {
222 status = "okay";
223 pinctrl-names = "default";
224 pinctrl-0 = <&i2c1_pins>;
225 clock-frequency = <400000>;
226
227 tps65917: tps65917@58 {
228 compatible = "ti,tps65917";
229 reg = <0x58>;
230
231 pinctrl-names = "default";
232 pinctrl-0 = <&tps65917_pins_default>;
233
234 interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
235 interrupt-controller;
236 #interrupt-cells = <2>;
237
238 ti,system-power-controller;
239
240 tps65917_pmic {
241 compatible = "ti,tps65917-pmic";
242
243 regulators {
244 smps1_reg: smps1 {
245 /* VDD_MPU */
246 regulator-name = "smps1";
247 regulator-min-microvolt = <850000>;
248 regulator-max-microvolt = <1250000>;
249 regulator-always-on;
250 regulator-boot-on;
251 };
252
253 smps2_reg: smps2 {
254 /* VDD_CORE */
255 regulator-name = "smps2";
256 regulator-min-microvolt = <850000>;
257 regulator-max-microvolt = <1060000>;
258 regulator-boot-on;
259 regulator-always-on;
260 };
261
262 smps3_reg: smps3 {
263 /* VDD_GPU IVA DSPEVE */
264 regulator-name = "smps3";
265 regulator-min-microvolt = <850000>;
266 regulator-max-microvolt = <1250000>;
267 regulator-boot-on;
268 regulator-always-on;
269 };
270
271 smps4_reg: smps4 {
272 /* VDDS1V8 */
273 regulator-name = "smps4";
274 regulator-min-microvolt = <1800000>;
275 regulator-max-microvolt = <1800000>;
276 regulator-always-on;
277 regulator-boot-on;
278 };
279
280 smps5_reg: smps5 {
281 /* VDD_DDR */
282 regulator-name = "smps5";
283 regulator-min-microvolt = <1350000>;
284 regulator-max-microvolt = <1350000>;
285 regulator-boot-on;
286 regulator-always-on;
287 };
288
289 ldo1_reg: ldo1 {
290 /* LDO1_OUT --> SDIO */
291 regulator-name = "ldo1";
292 regulator-min-microvolt = <1800000>;
293 regulator-max-microvolt = <3300000>;
294 regulator-boot-on;
295 };
296
297 ldo2_reg: ldo2 {
298 /* LDO2_OUT --> TP1017 (UNUSED) */
299 regulator-name = "ldo2";
300 regulator-min-microvolt = <1800000>;
301 regulator-max-microvolt = <3300000>;
302 };
303
304 ldo3_reg: ldo3 {
305 /* VDDA_1V8_PHY */
306 regulator-name = "ldo3";
307 regulator-min-microvolt = <1800000>;
308 regulator-max-microvolt = <1800000>;
309 regulator-boot-on;
310 regulator-always-on;
311 };
312
313 ldo5_reg: ldo5 {
314 /* VDDA_1V8_PLL */
315 regulator-name = "ldo5";
316 regulator-min-microvolt = <1800000>;
317 regulator-max-microvolt = <1800000>;
318 regulator-always-on;
319 regulator-boot-on;
320 };
321
322 ldo4_reg: ldo4 {
323 /* VDDA_3V_USB: VDDA_USBHS33 */
324 regulator-name = "ldo4";
325 regulator-min-microvolt = <3300000>;
326 regulator-max-microvolt = <3300000>;
327 regulator-boot-on;
328 };
329 };
330 };
331
332 tps65917_power_button {
333 compatible = "ti,palmas-pwrbutton";
334 interrupt-parent = <&tps65917>;
335 interrupts = <1 IRQ_TYPE_NONE>;
336 wakeup-source;
337 ti,palmas-long-press-seconds = <6>;
338 };
339 };
340
341 pcf_gpio_21: gpio@21 {
342 compatible = "ti,pcf8575";
343 reg = <0x21>;
344 lines-initial-states = <0x1408>;
345 gpio-controller;
346 #gpio-cells = <2>;
347 interrupt-parent = <&gpio6>;
348 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
349 interrupt-controller;
350 #interrupt-cells = <2>;
351 };
352};
353
354&i2c5 {
355 status = "okay";
356 pinctrl-names = "default";
357 pinctrl-0 = <&i2c5_pins>;
358 clock-frequency = <400000>;
359
360 pcf_hdmi: pcf8575@26 {
361 compatible = "nxp,pcf8575";
362 reg = <0x26>;
363 gpio-controller;
364 #gpio-cells = <2>;
365 /*
366 * initial state is used here to keep the mdio interface
367 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
368 * VIN2_S0 driven high otherwise Ethernet stops working
369 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
370 */
371 lines-initial-states = <0x0f2b>;
372 };
373};
374
375&uart1 {
376 status = "okay";
377};
378
379&elm {
380 status = "okay";
381};
382
383&gpmc {
384 status = "okay";
385 pinctrl-names = "default";
386 pinctrl-0 = <&nand_default>;
387 ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
388 nand@0,0 {
389 /* To use NAND, DIP switch SW5 must be set like so:
390 * SW5.1 (NAND_SELn) = ON (LOW)
391 * SW5.9 (GPMC_WPN) = OFF (HIGH)
392 */
393 reg = <0 0 4>; /* device IO registers */
394 ti,nand-ecc-opt = "bch8";
395 ti,elm-id = <&elm>;
396 nand-bus-width = <16>;
397 gpmc,device-width = <2>;
398 gpmc,sync-clk-ps = <0>;
399 gpmc,cs-on-ns = <0>;
400 gpmc,cs-rd-off-ns = <80>;
401 gpmc,cs-wr-off-ns = <80>;
402 gpmc,adv-on-ns = <0>;
403 gpmc,adv-rd-off-ns = <60>;
404 gpmc,adv-wr-off-ns = <60>;
405 gpmc,we-on-ns = <10>;
406 gpmc,we-off-ns = <50>;
407 gpmc,oe-on-ns = <4>;
408 gpmc,oe-off-ns = <40>;
409 gpmc,access-ns = <40>;
410 gpmc,wr-access-ns = <80>;
411 gpmc,rd-cycle-ns = <80>;
412 gpmc,wr-cycle-ns = <80>;
413 gpmc,bus-turnaround-ns = <0>;
414 gpmc,cycle2cycle-delay-ns = <0>;
415 gpmc,clk-activation-ns = <0>;
416 gpmc,wait-monitoring-ns = <0>;
417 gpmc,wr-data-mux-bus-ns = <0>;
418 /* MTD partition table */
419 /* All SPL-* partitions are sized to minimal length
420 * which can be independently programmable. For
421 * NAND flash this is equal to size of erase-block */
422 #address-cells = <1>;
423 #size-cells = <1>;
424 partition@0 {
425 label = "NAND.SPL";
426 reg = <0x00000000 0x000020000>;
427 };
428 partition@1 {
429 label = "NAND.SPL.backup1";
430 reg = <0x00020000 0x00020000>;
431 };
432 partition@2 {
433 label = "NAND.SPL.backup2";
434 reg = <0x00040000 0x00020000>;
435 };
436 partition@3 {
437 label = "NAND.SPL.backup3";
438 reg = <0x00060000 0x00020000>;
439 };
440 partition@4 {
441 label = "NAND.u-boot-spl-os";
442 reg = <0x00080000 0x00040000>;
443 };
444 partition@5 {
445 label = "NAND.u-boot";
446 reg = <0x000c0000 0x00100000>;
447 };
448 partition@6 {
449 label = "NAND.u-boot-env";
450 reg = <0x001c0000 0x00020000>;
451 };
452 partition@7 {
453 label = "NAND.u-boot-env.backup1";
454 reg = <0x001e0000 0x00020000>;
455 };
456 partition@8 {
457 label = "NAND.kernel";
458 reg = <0x00200000 0x00800000>;
459 };
460 partition@9 {
461 label = "NAND.file-system";
462 reg = <0x00a00000 0x0f600000>;
463 };
464 };
465};
466
467&usb2_phy1 {
468 phy-supply = <&ldo4_reg>;
469};
470
471&usb2_phy2 {
472 phy-supply = <&ldo4_reg>;
473};
474
475&omap_dwc3_1 {
476 extcon = <&extcon_usb1>;
477};
478
479&omap_dwc3_2 {
480 extcon = <&extcon_usb2>;
481};
482
483&usb1 {
484 dr_mode = "peripheral";
485 pinctrl-names = "default";
486 pinctrl-0 = <&usb1_pins>;
487};
488
489&usb2 {
490 dr_mode = "host";
491 pinctrl-names = "default";
492 pinctrl-0 = <&usb2_pins>;
493};
494
495&mmc1 {
496 status = "okay";
497 pinctrl-names = "default";
498 pinctrl-0 = <&mmc1_pins_default>;
499
500 vmmc-supply = <&ldo1_reg>;
501 bus-width = <4>;
502 /*
503 * SDCD signal is not being used here - using the fact that GPIO mode
504 * is a viable alternative
505 */
Mugunthan V Ne3614212016-04-04 17:28:03 +0530506 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
Tom Rini57cd6812015-07-31 19:55:12 -0400507};
508
509&mmc2 {
510 /* SW5-3 in ON position */
511 status = "okay";
512 pinctrl-names = "default";
513 pinctrl-0 = <&mmc2_pins_default>;
514
515 vmmc-supply = <&evm_3v3>;
516 bus-width = <8>;
517 ti,non-removable;
518};
519
520&dra7_pmx_core {
521 cpsw_default: cpsw_default {
522 pinctrl-single,pins = <
523 /* Slave 2 */
524 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
525 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
526 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
527 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
528 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
529 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
530 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
531 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
532 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
533 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
534 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
535 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
536 >;
537
538 };
539
540 cpsw_sleep: cpsw_sleep {
541 pinctrl-single,pins = <
542 /* Slave 2 */
543 0x198 (MUX_MODE15)
544 0x19c (MUX_MODE15)
545 0x1a0 (MUX_MODE15)
546 0x1a4 (MUX_MODE15)
547 0x1a8 (MUX_MODE15)
548 0x1ac (MUX_MODE15)
549 0x1b0 (MUX_MODE15)
550 0x1b4 (MUX_MODE15)
551 0x1b8 (MUX_MODE15)
552 0x1bc (MUX_MODE15)
553 0x1c0 (MUX_MODE15)
554 0x1c4 (MUX_MODE15)
555 >;
556 };
557
558 davinci_mdio_default: davinci_mdio_default {
559 pinctrl-single,pins = <
560 /* MDIO */
561 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
562 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
563 >;
564 };
565
566 davinci_mdio_sleep: davinci_mdio_sleep {
567 pinctrl-single,pins = <
568 0x23c (MUX_MODE15)
569 0x240 (MUX_MODE15)
570 >;
571 };
572};
573
574&mac {
575 status = "okay";
576 pinctrl-names = "default", "sleep";
577 pinctrl-0 = <&cpsw_default>;
578 pinctrl-1 = <&cpsw_sleep>;
579};
580
581&cpsw_emac1 {
582 phy_id = <&davinci_mdio>, <3>;
583 phy-mode = "rgmii";
584};
585
586&davinci_mdio {
587 pinctrl-names = "default", "sleep";
588 pinctrl-0 = <&davinci_mdio_default>;
589 pinctrl-1 = <&davinci_mdio_sleep>;
590 active_slave = <1>;
591};
592
593&dcan1 {
594 status = "ok";
595 pinctrl-names = "default", "sleep", "active";
596 pinctrl-0 = <&dcan1_pins_sleep>;
597 pinctrl-1 = <&dcan1_pins_sleep>;
598 pinctrl-2 = <&dcan1_pins_default>;
599};
600
601&qspi {
602 status = "okay";
603 pinctrl-names = "default";
604 pinctrl-0 = <&qspi1_pins>;
605
Vignesh R70ebdd72016-07-25 15:45:47 +0530606 spi-max-frequency = <76800000>;
Tom Rini57cd6812015-07-31 19:55:12 -0400607 m25p80@0 {
Mugunthan V N1f19d502015-12-23 20:39:44 +0530608 compatible = "s25fl256s1","spi-flash";
Vignesh Re835a742016-07-06 10:26:03 +0530609 spi-max-frequency = <64000000>;
Tom Rini57cd6812015-07-31 19:55:12 -0400610 reg = <0>;
611 spi-tx-bus-width = <1>;
612 spi-rx-bus-width = <4>;
Tom Rini57cd6812015-07-31 19:55:12 -0400613 #address-cells = <1>;
614 #size-cells = <1>;
615
616 /* MTD partition table.
617 * The ROM checks the first four physical blocks
618 * for a valid file to boot and the flash here is
619 * 64KiB block size.
620 */
621 partition@0 {
622 label = "QSPI.SPL";
623 reg = <0x00000000 0x000010000>;
624 };
625 partition@1 {
626 label = "QSPI.SPL.backup1";
627 reg = <0x00010000 0x00010000>;
628 };
629 partition@2 {
630 label = "QSPI.SPL.backup2";
631 reg = <0x00020000 0x00010000>;
632 };
633 partition@3 {
634 label = "QSPI.SPL.backup3";
635 reg = <0x00030000 0x00010000>;
636 };
637 partition@4 {
638 label = "QSPI.u-boot";
639 reg = <0x00040000 0x00100000>;
640 };
641 partition@5 {
642 label = "QSPI.u-boot-spl-os";
643 reg = <0x00140000 0x00080000>;
644 };
645 partition@6 {
646 label = "QSPI.u-boot-env";
647 reg = <0x001c0000 0x00010000>;
648 };
649 partition@7 {
650 label = "QSPI.u-boot-env.backup1";
651 reg = <0x001d0000 0x0010000>;
652 };
653 partition@8 {
654 label = "QSPI.kernel";
655 reg = <0x001e0000 0x0800000>;
656 };
657 partition@9 {
658 label = "QSPI.file-system";
659 reg = <0x009e0000 0x01620000>;
660 };
661 };
662};
663
664&dss {
665 status = "ok";
666
667 vdda_video-supply = <&ldo5_reg>;
668};
669
670&hdmi {
671 status = "ok";
672 vdda-supply = <&ldo3_reg>;
673
674 pinctrl-names = "default";
675 pinctrl-0 = <&hdmi_pins>;
676
677 port {
678 hdmi_out: endpoint {
679 remote-endpoint = <&tpd12s015_in>;
680 };
681 };
682};