blob: eb20492896fe9d0987ebcb0dd2940b9725b92db6 [file] [log] [blame]
Albert ARIBAUD7202e8a2012-11-26 11:27:37 +00001/*
2 * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net>
3 *
4 * Based on the netspace_v2 code which is
5 * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 */
20
21#ifndef _CONFIG_WIRELESS_SPACE_H
22#define _CONFIG_WIRELESS_SPACE_H
23
24/*
25 * Machine number definition
26 */
27#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */
28#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE
29#define CONFIG_IDENT_STRING " Wireless Space"
30
31/*
32 * High Level Configuration Options (easy to change)
33 */
34#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
35#define CONFIG_KIRKWOOD /* SoC Family Name */
36/* SoC name */
37#define CONFIG_KW88F6281
38#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
39
40/*
41 * Commands configuration
42 */
43#define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */
44#include <config_cmd_default.h>
45#define CONFIG_CMD_ENV
46#define CONFIG_CMD_DHCP
47#define CONFIG_CMD_PING
48#define CONFIG_CMD_NAND
49#define CONFIG_CMD_I2C
50#define CONFIG_CMD_IDE
51#define CONFIG_CMD_USB
52
53/*
54 * Core clock definition
55 */
56#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
57
58/*
59 * SDRAM configuration
60 */
61#define CONFIG_NR_DRAM_BANKS 1
62
63/*
64 * Different SDRAM configuration and size for some of the boards derived
65 * from the Network Space v2
66 */
67
68/*
69 * mv-common.h should be defined after CMD configs since it used them
70 * to enable certain macros
71 */
72#include "mv-common.h"
73
74/* Remove or override few declarations from mv-common.h */
75#undef CONFIG_RBTREE
76#undef CONFIG_SYS_IDE_MAXBUS
77#undef CONFIG_SYS_IDE_MAXDEVICE
78#define CONFIG_SYS_IDE_MAXBUS 1
79#define CONFIG_SYS_IDE_MAXDEVICE 1
80#undef CONFIG_SYS_PROMPT
81#define CONFIG_SYS_PROMPT "ws> "
82
83/*
84 * Ethernet Driver configuration
85 */
86#ifdef CONFIG_CMD_NET
87#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
88#define CONFIG_MVGBE_PORTS {1, 0} /* enable only egiga0... */
89#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
90#define CONFIG_PHY_BASE_ADR 0xa /* ... through a 'fake' PHY */
91#define CONFIG_MII
92#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
93#define CONFIG_NETCONSOLE
94#define CONFIG_MV88E61XX_SWITCH
95#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
96#define CONFIG_MV88E61XX_CMD
97#define CONFIG_CMD_TFTPPUT
98#endif /* CONFIG_CMD_NET */
99
100/*
101 * SATA Driver configuration
102 */
103#ifdef CONFIG_MVSATA_IDE
104#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
105#endif /* CONFIG_MVSATA_IDE */
106
107/*
108 * Enable GPI0 support
109 */
110#define CONFIG_KIRKWOOD_GPIO
111
112/*
113 * Enable I2C support
114 */
115#ifdef CONFIG_CMD_I2C
116/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
117#define CONFIG_CMD_EEPROM
118#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
119#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
120#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
121#endif /* CONFIG_CMD_I2C */
122
123/*
124 * Partition support
125 */
126#define CONFIG_DOS_PARTITION
127#define CONFIG_EFI_PARTITION
128
129/*
130 * File systems support
131 */
132#define CONFIG_CMD_EXT2
133#define CONFIG_CMD_FAT
134
135/*
136 * Use the HUSH parser
137 */
138#define CONFIG_SYS_HUSH_PARSER
139
140/*
141 * Console configuration
142 */
143#define CONFIG_CONSOLE_MUX
144#define CONFIG_SYS_CONSOLE_IS_IN_ENV
145
146/*
147 * Enable device tree support
148 */
149#define CONFIG_OF_LIBFDT
150
151/*
152 * Environment variables configurations
153 */
154
155#define CONFIG_ENV_IS_IN_NAND
156#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
157#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
158#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
159
160/*
161 * Board-specific command to make using buttons etc easier
162 */
163
164#define CONFIG_WIRELESS_SPACE_CMD
165
166/*
167 * Default environment variables
168 */
169#define CONFIG_PREBOOT
170
171#define CONFIG_BOOTARGS "console=ttyS0,115200"
172
173#define CONFIG_BOOTCOMMAND \
174 "if run usbload || run diskload; then bootm; fi"
175
176#define CONFIG_EXTRA_ENV_SETTINGS \
177 "stdin=serial\0" \
178 "stdout=serial\0" \
179 "stderr=serial\0" \
180 "bootfile=uImage\0" \
181 "loadaddr=0x800000\0" \
182 "autoload=no\0" \
183 "netconsole=" \
184 "set stdin $stdin,nc; " \
185 "set stdout $stdout,nc; " \
186 "set stderr $stderr,nc;\0" \
187 "diskload=ide reset && " \
188 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \
189 "usbload=usb start && " \
190 "fatload usb 0:1 $loadaddr /boot/$bootfile\0" \
191 "preboot=" \
192 "dhcp && run netconsole\0"
193
194#endif /* _CONFIG_WIRELESS_SPACE_H */