blob: 49ee36c74aec81cbdb512d0e46526ba7cce380e0 [file] [log] [blame]
Heiko Schocher88ffb262010-01-07 08:55:54 +01001/*
Wolfgang Denk1a459662013-07-08 09:37:19 +02002 * SPDX-License-Identifier: GPL-2.0+
Heiko Schocher88ffb262010-01-07 08:55:54 +01003 *
4 * based on: cmd_jffs2.c
5 *
6 * Add support for a CRAMFS located in RAM
7 */
8
9
10/*
11 * CRAMFS support
12 */
13#include <common.h>
14#include <command.h>
15#include <malloc.h>
Tyler Hall511c66b2017-04-12 16:29:15 -040016#include <mapmem.h>
Heiko Schocher88ffb262010-01-07 08:55:54 +010017#include <linux/list.h>
18#include <linux/ctype.h>
19#include <jffs2/jffs2.h>
20#include <jffs2/load_kernel.h>
21#include <cramfs/cramfs_fs.h>
Tyler Hall511c66b2017-04-12 16:29:15 -040022#include <asm/io.h>
Heiko Schocher88ffb262010-01-07 08:55:54 +010023
24/* enable/disable debugging messages */
25#define DEBUG_CRAMFS
26#undef DEBUG_CRAMFS
27
28#ifdef DEBUG_CRAMFS
29# define DEBUGF(fmt, args...) printf(fmt ,##args)
30#else
31# define DEBUGF(fmt, args...)
32#endif
33
Heiko Schocheree8bc962011-05-03 02:15:01 +000034#include <flash.h>
Heiko Schocher88ffb262010-01-07 08:55:54 +010035
Masahiro Yamadae856bdc2017-02-11 22:43:54 +090036#ifndef CONFIG_MTD_NOR_FLASH
Heiko Schocher62a813b2011-05-03 02:15:15 +000037# define OFFSET_ADJUSTMENT 0
38#else
39# define OFFSET_ADJUSTMENT (flash_info[id.num].start[0])
40#endif
41
Simon Glass59e12a42017-05-17 03:25:38 -060042#ifndef CONFIG_FS_JFFS2
Heiko Schocher88ffb262010-01-07 08:55:54 +010043#include <linux/stat.h>
44char *mkmodestr(unsigned long mode, char *str)
45{
46 static const char *l = "xwr";
47 int mask = 1, i;
48 char c;
49
50 switch (mode & S_IFMT) {
51 case S_IFDIR: str[0] = 'd'; break;
52 case S_IFBLK: str[0] = 'b'; break;
53 case S_IFCHR: str[0] = 'c'; break;
54 case S_IFIFO: str[0] = 'f'; break;
55 case S_IFLNK: str[0] = 'l'; break;
56 case S_IFSOCK: str[0] = 's'; break;
57 case S_IFREG: str[0] = '-'; break;
58 default: str[0] = '?';
59 }
60
61 for(i = 0; i < 9; i++) {
62 c = l[i%3];
63 str[9-i] = (mode & mask)?c:'-';
64 mask = mask<<1;
65 }
66
67 if(mode & S_ISUID) str[3] = (mode & S_IXUSR)?'s':'S';
68 if(mode & S_ISGID) str[6] = (mode & S_IXGRP)?'s':'S';
69 if(mode & S_ISVTX) str[9] = (mode & S_IXOTH)?'t':'T';
70 str[10] = '\0';
71 return str;
72}
Simon Glass59e12a42017-05-17 03:25:38 -060073#endif /* CONFIG_FS_JFFS2 */
Heiko Schocher88ffb262010-01-07 08:55:54 +010074
75extern int cramfs_check (struct part_info *info);
76extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename);
77extern int cramfs_ls (struct part_info *info, char *filename);
78extern int cramfs_info (struct part_info *info);
79
80/***************************************************/
Bin Menga1875592016-02-05 19:30:11 -080081/* U-Boot commands */
Heiko Schocher88ffb262010-01-07 08:55:54 +010082/***************************************************/
83
84/**
85 * Routine implementing fsload u-boot command. This routine tries to load
86 * a requested file from cramfs filesystem at location 'cramfsaddr'.
87 * cramfsaddr is an evironment variable.
88 *
89 * @param cmdtp command internal data
90 * @param flag command flag
91 * @param argc number of arguments supplied to the command
92 * @param argv arguments list
93 * @return 0 on success, 1 otherwise
94 */
Wolfgang Denk54841ab2010-06-28 22:00:46 +020095int do_cramfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
Heiko Schocher88ffb262010-01-07 08:55:54 +010096{
97 char *filename;
98 int size;
99 ulong offset = load_addr;
Tyler Hall511c66b2017-04-12 16:29:15 -0400100 char *offset_virt;
Heiko Schocher88ffb262010-01-07 08:55:54 +0100101
102 struct part_info part;
103 struct mtd_device dev;
104 struct mtdids id;
105
106 ulong addr;
107 addr = simple_strtoul(getenv("cramfsaddr"), NULL, 16);
108
109 /* hack! */
110 /* cramfs_* only supports NOR flash chips */
111 /* fake the device type */
112 id.type = MTD_DEV_TYPE_NOR;
113 id.num = 0;
114 dev.id = &id;
115 part.dev = &dev;
116 /* fake the address offset */
Tyler Hall511c66b2017-04-12 16:29:15 -0400117 part.offset = (u64)(uintptr_t) map_sysmem(addr - OFFSET_ADJUSTMENT, 0);
Heiko Schocher88ffb262010-01-07 08:55:54 +0100118
119 /* pre-set Boot file name */
120 if ((filename = getenv("bootfile")) == NULL) {
121 filename = "uImage";
122 }
123
124 if (argc == 2) {
125 filename = argv[1];
126 }
127 if (argc == 3) {
128 offset = simple_strtoul(argv[1], NULL, 0);
129 load_addr = offset;
130 filename = argv[2];
131 }
132
Tyler Hall511c66b2017-04-12 16:29:15 -0400133 offset_virt = map_sysmem(offset, 0);
Heiko Schocher88ffb262010-01-07 08:55:54 +0100134 size = 0;
135 if (cramfs_check(&part))
Tyler Hall511c66b2017-04-12 16:29:15 -0400136 size = cramfs_load (offset_virt, &part, filename);
Heiko Schocher88ffb262010-01-07 08:55:54 +0100137
138 if (size > 0) {
Heiko Schocher88ffb262010-01-07 08:55:54 +0100139 printf("### CRAMFS load complete: %d bytes loaded to 0x%lx\n",
140 size, offset);
Simon Glass41ef3722013-02-24 17:33:22 +0000141 setenv_hex("filesize", size);
Heiko Schocher88ffb262010-01-07 08:55:54 +0100142 } else {
143 printf("### CRAMFS LOAD ERROR<%x> for %s!\n", size, filename);
144 }
145
Tyler Hall511c66b2017-04-12 16:29:15 -0400146 unmap_sysmem(offset_virt);
147 unmap_sysmem((void *)(uintptr_t)part.offset);
148
Heiko Schocher88ffb262010-01-07 08:55:54 +0100149 return !(size > 0);
150}
151
152/**
153 * Routine implementing u-boot ls command which lists content of a given
154 * directory at location 'cramfsaddr'.
155 * cramfsaddr is an evironment variable.
156 *
157 * @param cmdtp command internal data
158 * @param flag command flag
159 * @param argc number of arguments supplied to the command
160 * @param argv arguments list
161 * @return 0 on success, 1 otherwise
162 */
Wolfgang Denk54841ab2010-06-28 22:00:46 +0200163int do_cramfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
Heiko Schocher88ffb262010-01-07 08:55:54 +0100164{
165 char *filename = "/";
166 int ret;
167 struct part_info part;
168 struct mtd_device dev;
169 struct mtdids id;
170
171 ulong addr;
172 addr = simple_strtoul(getenv("cramfsaddr"), NULL, 16);
173
174 /* hack! */
175 /* cramfs_* only supports NOR flash chips */
176 /* fake the device type */
177 id.type = MTD_DEV_TYPE_NOR;
178 id.num = 0;
179 dev.id = &id;
180 part.dev = &dev;
181 /* fake the address offset */
Tyler Hall511c66b2017-04-12 16:29:15 -0400182 part.offset = (u64)(uintptr_t) map_sysmem(addr - OFFSET_ADJUSTMENT, 0);
Heiko Schocher88ffb262010-01-07 08:55:54 +0100183
184 if (argc == 2)
185 filename = argv[1];
186
187 ret = 0;
188 if (cramfs_check(&part))
189 ret = cramfs_ls (&part, filename);
Tyler Hall511c66b2017-04-12 16:29:15 -0400190 unmap_sysmem((void *)(uintptr_t)part.offset);
Heiko Schocher88ffb262010-01-07 08:55:54 +0100191
192 return ret ? 0 : 1;
193}
194
195/* command line only */
196
197/***************************************************/
198U_BOOT_CMD(
199 cramfsload, 3, 0, do_cramfs_load,
Frans Meulenbroekscc9f6072010-07-31 15:01:52 +0200200 "load binary file from a filesystem image",
Heiko Schocher88ffb262010-01-07 08:55:54 +0100201 "[ off ] [ filename ]\n"
202 " - load binary file from address 'cramfsaddr'\n"
203 " with offset 'off'\n"
204);
205U_BOOT_CMD(
206 cramfsls, 2, 1, do_cramfs_ls,
Frans Meulenbroekscc9f6072010-07-31 15:01:52 +0200207 "list files in a directory (default /)",
Heiko Schocher88ffb262010-01-07 08:55:54 +0100208 "[ directory ]\n"
209 " - list files in a directory.\n"
210);