| Walter Schweizer | a0a868b | 2016-10-06 23:29:56 +0200 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2011 |
| 3 | * Jason Cooper <u-boot@lakedaemon.net> |
| 4 | * |
| 5 | * Based on work by: |
| 6 | * Marvell Semiconductor <www.marvell.com> |
| 7 | * Written-by: Siddarth Gore <gores@marvell.com> |
| 8 | * |
| 9 | * SPDX-License-Identifier: GPL-2.0+ |
| 10 | */ |
| 11 | |
| 12 | #ifndef _CONFIG_DS109_H |
| 13 | #define _CONFIG_DS109_H |
| 14 | |
| Tom Rini | cd7b634 | 2017-01-25 20:42:38 -0500 | [diff] [blame] | 15 | /* Provide the MACH_TYPE value that the vendor kernel requires. */ |
| 16 | #define CONFIG_MACH_TYPE 527 |
| Walter Schweizer | a0a868b | 2016-10-06 23:29:56 +0200 | [diff] [blame] | 17 | |
| 18 | /* |
| 19 | * High Level Configuration Options (easy to change) |
| 20 | */ |
| 21 | #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ |
| Walter Schweizer | a0a868b | 2016-10-06 23:29:56 +0200 | [diff] [blame] | 22 | |
| 23 | /* |
| 24 | * Commands configuration |
| 25 | */ |
| 26 | #define CONFIG_CMD_EXT2 |
| Walter Schweizer | a0a868b | 2016-10-06 23:29:56 +0200 | [diff] [blame] | 27 | |
| 28 | /* |
| 29 | * mv-plug-common.h should be defined after CMD configs since it used them |
| 30 | * to enable certain macros |
| 31 | */ |
| 32 | #include "mv-plug-common.h" |
| 33 | |
| 34 | /* |
| 35 | * Environment variables configurations |
| 36 | */ |
| 37 | #ifdef CONFIG_SPI_FLASH |
| Walter Schweizer | a0a868b | 2016-10-06 23:29:56 +0200 | [diff] [blame] | 38 | #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ |
| Walter Schweizer | a0a868b | 2016-10-06 23:29:56 +0200 | [diff] [blame] | 39 | #endif |
| 40 | |
| 41 | #ifdef CONFIG_CMD_SF |
| 42 | #define CONFIG_HARD_SPI 1 |
| 43 | #define CONFIG_KIRKWOOD_SPI 1 |
| 44 | #define CONFIG_ENV_SPI_BUS 0 |
| 45 | #define CONFIG_ENV_SPI_CS 0 |
| 46 | #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ |
| 47 | #endif |
| 48 | |
| 49 | /* |
| 50 | * max 4k env size is enough, but in case of nand |
| 51 | * it has to be rounded to sector size |
| 52 | */ |
| 53 | #define CONFIG_ENV_SIZE 0x10000 |
| 54 | #define CONFIG_ENV_ADDR 0x3d0000 |
| 55 | #define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */ |
| 56 | |
| 57 | /* |
| 58 | * Default environment variables |
| 59 | */ |
| 60 | #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ |
| 61 | "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ |
| 62 | "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ |
| 63 | "bootm 0x6400000;" |
| 64 | |
| 65 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 66 | "x_bootcmd_ethernet=ping 192.168.1.2\0" \ |
| 67 | "x_bootcmd_usb=usb start\0" \ |
| 68 | "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ |
| 69 | "x_bootargs=console=ttyS0,115200\0" \ |
| 70 | "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \ |
| 71 | "ipaddr=192.168.1.5\0" |
| 72 | |
| 73 | /* |
| 74 | * Ethernet Driver configuration |
| 75 | */ |
| 76 | #ifdef CONFIG_CMD_NET |
| 77 | #define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ |
| 78 | #define CONFIG_PHY_BASE_ADR 8 |
| 79 | #endif /* CONFIG_CMD_NET */ |
| 80 | |
| 81 | /* |
| 82 | * SATA Driver configuration |
| 83 | */ |
| 84 | #ifdef CONFIG_MVSATA_IDE |
| 85 | #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET |
| 86 | #endif /*CONFIG_MVSATA_IDE*/ |
| 87 | |
| 88 | #endif /* _CONFIG_DS109_H */ |