Blame - drivers/mmc/Kconfig - platform/external/u-boot

blob: bf4d994ff695533e60fcfc6debe9a24b23c7b8b8 [file] [log] [blame]

Nobuhiro Iwamatsu	72d42ba	2014-12-17 08:03:00 +0900	[diff] [blame]	1	menu "MMC Host controller Support"
				2
Maxime Ripard	7a777f6	2015-10-15 22:04:05 +0200	[diff] [blame]	3	config MMC
Masahiro Yamada	c272699	2016-12-07 22:10:26 +0900	[diff] [blame]	4	bool "MMC/SD/SDIO card support"
				5	default ARM \|\| PPC \|\| SANDBOX
Tom Rini	f7173fc	2021-04-21 15:32:27 -0400	[diff] [blame]	6	select DM_MMC if DM
Maxime Ripard	7a777f6	2015-10-15 22:04:05 +0200	[diff] [blame]	7	help
Masahiro Yamada	c272699	2016-12-07 22:10:26 +0900	[diff] [blame]	8	This selects MultiMediaCard, Secure Digital and Secure
				9	Digital I/O support.
				10
				11	If you want MMC/SD/SDIO support, you should say Y here and
				12	also to your specific host controller driver.
Maxime Ripard	7a777f6	2015-10-15 22:04:05 +0200	[diff] [blame]	13
Jean-Jacques Hiblot	d6400c3	2018-01-04 15:23:32 +0100	[diff] [blame]	14	config MMC_WRITE
				15	bool "support for MMC/SD write operations"
				16	depends on MMC
				17	default y
				18	help
				19	Enable write access to MMC and SD Cards
				20
Jaehoon Chung	caee38a	2021-02-16 10:16:52 +0900	[diff] [blame]	21	config MMC_PWRSEQ
				22	bool "HW reset support for eMMC"
				23	depends on PWRSEQ
				24	help
				25	Ths select Hardware reset support aka pwrseq-emmc for eMMC
				26	devices.
				27
Jun Nie	2f516e4	2018-01-02 12:25:57 +0800	[diff] [blame]	28	config MMC_BROKEN_CD
				29	bool "Poll for broken card detection case"
				30	help
				31	If card detection feature is broken, just poll to detect.
				32
Simon Glass	e7ecf7c	2015-06-23 15:38:48 -0600	[diff] [blame]	33	config DM_MMC
				34	bool "Enable MMC controllers using Driver Model"
				35	depends on DM
Tom Rini	f7173fc	2021-04-21 15:32:27 -0400	[diff] [blame]	36	select BLK
Simon Glass	e7ecf7c	2015-06-23 15:38:48 -0600	[diff] [blame]	37	help
Robert P. J. Day	62a3b7d	2016-07-15 13:44:45 -0400	[diff] [blame]	38	This enables the MultiMediaCard (MMC) uclass which supports MMC and
Simon Glass	e7ecf7c	2015-06-23 15:38:48 -0600	[diff] [blame]	39	Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
				40	and non-removable (e.g. eMMC chip) devices are supported. These
				41	appear as block devices in U-Boot and can support filesystems such
				42	as EXT4 and FAT.
				43
Simon Glass	c4d660d	2017-07-04 13:31:19 -0600	[diff] [blame]	44	config SPL_DM_MMC
				45	bool "Enable MMC controllers using Driver Model in SPL"
				46	depends on SPL_DM && DM_MMC
Pali Rohár	35ed176	2022-05-24 10:58:42 +0200	[diff] [blame]	47	default n if ARCH_MVEBU && !MVEBU_SPL_BOOT_DEVICE_MMC
Simon Glass	c4d660d	2017-07-04 13:31:19 -0600	[diff] [blame]	48	default y
				49	help
				50	This enables the MultiMediaCard (MMC) uclass which supports MMC and
				51	Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
				52	and non-removable (e.g. eMMC chip) devices are supported. These
				53	appear as block devices in U-Boot and can support filesystems such
				54	as EXT4 and FAT.
				55
Masahiro Yamada	e298c46	2016-12-07 22:10:27 +0900	[diff] [blame]	56	if MMC
				57
Michael Walle	4d6a773	2020-09-23 12:42:51 +0200	[diff] [blame]	58	config MMC_SDHCI_ADMA_HELPERS
				59	bool
				60
Bhargav Shah	05e35d4	2019-07-08 04:10:48 +0000	[diff] [blame]	61	config MMC_SPI
				62	bool "Support for SPI-based MMC controller"
				63	depends on DM_MMC && DM_SPI
				64	help
				65	This selects SPI-based MMC controllers.
				66	If you have an MMC controller on a SPI bus, say Y here.
				67
				68	If unsure, say N.
				69
				70	config MMC_SPI_CRC_ON
				71	bool "Support CRC for SPI-based MMC controller"
				72	depends on MMC_SPI
				73	default y
				74	help
				75	This enables CRC for SPI-based MMC controllers.
				76
				77	If unsure, say N.
				78
Patrice Chotard	3c0dbed	2017-10-23 10:57:31 +0200	[diff] [blame]	79	config ARM_PL180_MMCI
				80	bool "ARM AMBA Multimedia Card Interface and compatible support"
Patrice Chotard	3c0dbed	2017-10-23 10:57:31 +0200	[diff] [blame]	81	help
				82	This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
				83	Interface (PL180, PL181 and compatible) support.
				84	If you have an ARM(R) platform with a Multimedia Card slot,
				85	say Y or M here.
				86
Kishon Vijay Abraham I	83dc422	2017-09-21 16:30:10 +0200	[diff] [blame]	87	config MMC_QUIRKS
				88	bool "Enable quirks"
				89	default y
				90	help
				91	Some cards and hosts may sometimes behave unexpectedly (quirks).
				92	This option enable workarounds to handle those quirks. Some of them
Joel Johnson	26632b7	2020-01-11 09:08:15 -0700	[diff] [blame]	93	are enabled by default, other may require additional flags or are
Kishon Vijay Abraham I	83dc422	2017-09-21 16:30:10 +0200	[diff] [blame]	94	enabled by the host driver.
				95
Tom Rini	75fc79e	2022-10-28 20:27:05 -0400	[diff] [blame^]	96	config SYS_MMC_MAX_BLK_COUNT
				97	int "Block count limit"
				98	default 65535
				99	help
				100	The block count limit on MMC based devices. We default to 65535 due
				101	to a 16bit register limit on some hardware.
				102
Jean-Jacques Hiblot	cf17789	2017-11-30 17:44:02 +0100	[diff] [blame]	103	config MMC_HW_PARTITIONING
				104	bool "Support for HW partitioning command(eMMC)"
				105	default y
				106	help
				107	This adds a command and an API to do hardware partitioning on eMMC
				108	devices.
				109
Alex Kiernan	5a7b11e	2018-05-08 04:43:31 +0000	[diff] [blame]	110	config SUPPORT_EMMC_RPMB
				111	bool "Support eMMC replay protected memory block (RPMB)"
				112	imply CMD_MMC_RPMB
				113	help
				114	Enable support for reading, writing and programming the
				115	key for the Replay Protection Memory Block partition in eMMC.
				116
Alex Kiernan	623de3f	2019-05-01 07:58:27 +0000	[diff] [blame]	117	config SUPPORT_EMMC_BOOT
				118	bool "Support some additional features of the eMMC boot partitions"
				119	help
				120	Enable support for eMMC boot partitions. This also enables
				121	extensions within the mmc command.
				122
Jean-Jacques Hiblot	f99c2ef	2017-11-30 17:44:01 +0100	[diff] [blame]	123	config MMC_IO_VOLTAGE
				124	bool "Support IO voltage configuration"
				125	help
				126	IO voltage configuration allows selecting the voltage level of the IO
				127	lines (not the level of main supply). This is required for UHS
				128	support. For eMMC this not mandatory, but not enabling this option may
				129	prevent the driver of using the faster modes.
				130
				131	config SPL_MMC_IO_VOLTAGE
				132	bool "Support IO voltage configuration in SPL"
Tom Rini	b340199	2022-06-10 23:03:09 -0400	[diff] [blame]	133	depends on SPL_MMC
Jean-Jacques Hiblot	f99c2ef	2017-11-30 17:44:01 +0100	[diff] [blame]	134	help
				135	IO voltage configuration allows selecting the voltage level of the IO
				136	lines (not the level of main supply). This is required for UHS
				137	support. For eMMC this not mandatory, but not enabling this option may
				138	prevent the driver of using the faster modes.
				139
				140	config MMC_UHS_SUPPORT
				141	bool "enable UHS support"
				142	depends on MMC_IO_VOLTAGE
				143	help
				144	The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
				145	cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
				146	frequency can go up to 208MHz (SDR104)
				147
				148	config SPL_MMC_UHS_SUPPORT
				149	bool "enable UHS support in SPL"
				150	depends on SPL_MMC_IO_VOLTAGE
				151	help
				152	The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
				153	cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
				154	frequency can go up to 208MHz (SDR104)
				155
Peng Fan	44acd49	2019-07-10 14:43:07 +0800	[diff] [blame]	156	config MMC_HS400_ES_SUPPORT
				157	bool "enable HS400 Enhanced Strobe support"
				158	help
				159	The HS400 Enhanced Strobe mode is support by some eMMC. The bus
				160	frequency is up to 200MHz. This mode does not tune the IO.
				161
				162	config SPL_MMC_HS400_ES_SUPPORT
				163	bool "enable HS400 Enhanced Strobe support in SPL"
Tom Rini	b340199	2022-06-10 23:03:09 -0400	[diff] [blame]	164	depends on SPL_MMC
Peng Fan	44acd49	2019-07-10 14:43:07 +0800	[diff] [blame]	165	help
				166	The HS400 Enhanced Strobe mode is support by some eMMC. The bus
				167	frequency is up to 200MHz. This mode does not tune the IO.
				168
Peng Fan	3dd2626	2018-08-10 14:07:54 +0800	[diff] [blame]	169	config MMC_HS400_SUPPORT
				170	bool "enable HS400 support"
				171	select MMC_HS200_SUPPORT
				172	help
				173	The HS400 mode is support by some eMMC. The bus frequency is up to
				174	200MHz. This mode requires tuning the IO.
				175
				176	config SPL_MMC_HS400_SUPPORT
				177	bool "enable HS400 support in SPL"
Tom Rini	b340199	2022-06-10 23:03:09 -0400	[diff] [blame]	178	depends on SPL_MMC
Faiz Abbas	68b3e8b	2019-08-01 16:33:36 +0530	[diff] [blame]	179	select SPL_MMC_HS200_SUPPORT
Peng Fan	3dd2626	2018-08-10 14:07:54 +0800	[diff] [blame]	180	help
				181	The HS400 mode is support by some eMMC. The bus frequency is up to
				182	200MHz. This mode requires tuning the IO.
				183
Jean-Jacques Hiblot	f99c2ef	2017-11-30 17:44:01 +0100	[diff] [blame]	184	config MMC_HS200_SUPPORT
				185	bool "enable HS200 support"
				186	help
				187	The HS200 mode is support by some eMMC. The bus frequency is up to
				188	200MHz. This mode requires tuning the IO.
				189
Jean-Jacques Hiblot	f99c2ef	2017-11-30 17:44:01 +0100	[diff] [blame]	190	config SPL_MMC_HS200_SUPPORT
				191	bool "enable HS200 support in SPL"
Tom Rini	b340199	2022-06-10 23:03:09 -0400	[diff] [blame]	192	depends on SPL_MMC
Jean-Jacques Hiblot	f99c2ef	2017-11-30 17:44:01 +0100	[diff] [blame]	193	help
				194	The HS200 mode is support by some eMMC. The bus frequency is up to
				195	200MHz. This mode requires tuning the IO.
				196
Jean-Jacques Hiblot	35f9e19	2017-09-21 16:29:53 +0200	[diff] [blame]	197	config MMC_VERBOSE
				198	bool "Output more information about the MMC"
				199	default y
				200	help
				201	Enable the output of more information about the card such as the
				202	operating mode.
				203
Jaehoon Chung	72b5a03	2018-01-26 19:25:31 +0900	[diff] [blame]	204	config MMC_TRACE
				205	bool "MMC debugging"
Jaehoon Chung	72b5a03	2018-01-26 19:25:31 +0900	[diff] [blame]	206	help
				207	This is an option for use by developer. Enable MMC core debugging.
				208
				209	If you need to see the MMC core message, say Y.
				210
Masahiro Yamada	1d2c050	2017-01-10 13:32:07 +0900	[diff] [blame]	211	config MMC_DAVINCI
				212	bool "TI DAVINCI Multimedia Card Interface support"
				213	depends on ARCH_DAVINCI
				214	default y
				215	help
				216	This selects the TI DAVINCI Multimedia card Interface.
				217	If you have an DAVINCI board with a Multimedia Card slot,
				218	say Y here. If unsure, say N.
				219
Masahiro Yamada	55ed3b4	2017-01-10 13:32:04 +0900	[diff] [blame]	220	config MMC_DW
				221	bool "Synopsys DesignWare Memory Card Interface"
Philipp Tomsich	2acc24f	2018-11-30 22:13:25 +0100	[diff] [blame]	222	select BOUNCE_BUFFER
Masahiro Yamada	55ed3b4	2017-01-10 13:32:04 +0900	[diff] [blame]	223	help
				224	This selects support for the Synopsys DesignWare Mobile Storage IP
				225	block, this provides host support for SD and MMC interfaces, in both
				226	PIO, internal DMA mode and external DMA mode.
				227
Arthur Li	d55e4e7	2020-02-20 18:19:35 -0800	[diff] [blame]	228	config MMC_DW_CORTINA
				229	bool "Cortina specific extensions for Synopsys DW Memory Card Interface"
				230	depends on DM_MMC
				231	depends on MMC_DW
				232	depends on BLK
Arthur Li	d55e4e7	2020-02-20 18:19:35 -0800	[diff] [blame]	233	help
				234	This selects support for Cortina SoC specific extensions to the
				235	Synopsys DesignWare Memory Card Interface driver. Select this option
				236	for platforms based on Cortina CAxxxx Soc's.
				237
Masahiro Yamada	ae4c81e	2017-01-10 13:32:05 +0900	[diff] [blame]	238	config MMC_DW_EXYNOS
				239	bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
				240	depends on ARCH_EXYNOS
				241	depends on MMC_DW
				242	default y
				243	help
				244	This selects support for Samsung Exynos SoC specific extensions to the
				245	Synopsys DesignWare Memory Card Interface driver. Select this option
				246	for platforms based on Exynos4 and Exynos5 SoC's.
				247
				248	config MMC_DW_K3
				249	bool "K3 specific extensions for Synopsys DW Memory Card Interface"
				250	depends on MMC_DW
				251	help
				252	This selects support for Hisilicon K3 SoC specific extensions to the
				253	Synopsys DesignWare Memory Card Interface driver. Select this option
				254	for platforms based on Hisilicon K3 SoC's.
				255
Masahiro Yamada	fed4408	2017-01-10 13:32:03 +0900	[diff] [blame]	256	config MMC_DW_ROCKCHIP
Simon Glass	a8cb4fb	2015-08-30 16:55:37 -0600	[diff] [blame]	257	bool "Rockchip SD/MMC controller support"
				258	depends on DM_MMC && OF_CONTROL
Masahiro Yamada	55ed3b4	2017-01-10 13:32:04 +0900	[diff] [blame]	259	depends on MMC_DW
Simon Glass	a8cb4fb	2015-08-30 16:55:37 -0600	[diff] [blame]	260	help
				261	This enables support for the Rockchip SD/MMM controller, which is
				262	based on Designware IP. The device is compatible with at least
				263	SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
				264	as removeable SD and micro-SD cards.
				265
Masahiro Yamada	ae4c81e	2017-01-10 13:32:05 +0900	[diff] [blame]	266	config MMC_DW_SOCFPGA
				267	bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
				268	depends on ARCH_SOCFPGA
				269	depends on MMC_DW
				270	default y
				271	help
				272	This selects support for Altera SOCFPGA specific extensions to the
				273	Synopsys DesignWare Memory Card Interface driver. Select this option
				274	for platforms based on Altera SOCFPGA.
				275
Eugeniy Paltsev	15736e2	2019-02-25 18:35:28 +0300	[diff] [blame]	276	config MMC_DW_SNPS
				277	bool "Extensions for DW Memory Card Interface used in Synopsys ARC devboards"
				278	depends on MMC_DW
				279	depends on DM_MMC
				280	depends on OF_CONTROL
				281	depends on CLK
				282	help
				283	This selects support for Synopsys DesignWare Memory Card Interface driver
				284	extensions used in various Synopsys ARC devboards.
				285
Stefan Bosch	8408318	2020-07-10 19:07:29 +0200	[diff] [blame]	286	config NEXELL_DWMMC
				287	bool "Nexell SD/MMC controller support"
				288	depends on ARCH_NEXELL
				289	depends on MMC_DW
				290	depends on DM_MMC
				291	depends on PINCTRL_NEXELL
				292	default y
				293
Carlo Caione	9373862	2017-04-12 20:30:42 +0200	[diff] [blame]	294	config MMC_MESON_GX
				295	bool "Meson GX EMMC controller support"
Simon Glass	e7881d8	2017-07-29 11:35:31 -0600	[diff] [blame]	296	depends on DM_MMC && BLK && ARCH_MESON
Carlo Caione	9373862	2017-04-12 20:30:42 +0200	[diff] [blame]	297	help
				298	Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
				299
Masahiro Yamada	1d2c050	2017-01-10 13:32:07 +0900	[diff] [blame]	300	config MMC_MXC
				301	bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
				302	help
				303	This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
				304	Multimedia Card Interface. If you have an i.MX or MPC512x platform
				305	with a Multimedia Card slot, say Y here.
				306
				307	If unsure, say N.
				308
Amit Singh Tomar	57a91c3	2021-11-28 17:02:24 +0530	[diff] [blame]	309	config MMC_OWL
				310	bool "Actions OWL Multimedia Card Interface support"
				311	depends on ARCH_OWL && DM_MMC && BLK
				312	help
				313	This selects the OWL SD/MMC host controller found on board
				314	based on Actions S700/S900 SoC.
				315
Masahiro Yamada	1d2c050	2017-01-10 13:32:07 +0900	[diff] [blame]	316	config MMC_MXS
				317	bool "Freescale MXS Multimedia Card Interface support"
Adam Ford	99bec1a	2018-02-06 08:34:45 -0600	[diff] [blame]	318	depends on MX23 \|\| MX28 \|\| MX6 \|\| MX7
Philipp Tomsich	2acc24f	2018-11-30 22:13:25 +0100	[diff] [blame]	319	select BOUNCE_BUFFER
Adam Ford	99bec1a	2018-02-06 08:34:45 -0600	[diff] [blame]	320	select APBH_DMA
				321	select APBH_DMA_BURST if ARCH_MX6 \|\| ARCH_MX7
				322	select APBH_DMA_BURST8 if ARCH_MX6 \|\| ARCH_MX7
Masahiro Yamada	1d2c050	2017-01-10 13:32:07 +0900	[diff] [blame]	323	help
				324	This selects the Freescale SSP MMC controller found on MXS based
				325	platforms like mx23/28.
				326
				327	If unsure, say N.
				328
Felipe Balbi	b706b1c	2017-02-20 14:24:13 +0300	[diff] [blame]	329	config MMC_PCI
				330	bool "Support for MMC controllers on PCI"
Bin Meng	511dcc3	2021-02-15 20:01:44 +0800	[diff] [blame]	331	depends on MMC_SDHCI
Felipe Balbi	b706b1c	2017-02-20 14:24:13 +0300	[diff] [blame]	332	help
				333	This selects PCI-based MMC controllers.
				334	If you have an MMC controller on a PCI bus, say Y here.
				335
Suneel Garapati	7085989	2019-10-19 18:03:01 -0700	[diff] [blame]	336	config MMC_OCTEONTX
Stefan Roese	f9bb0ba	2021-03-12 09:48:25 +0100	[diff] [blame]	337	bool "Marvell Octeon Multimedia Card Interface support"
				338	depends on (ARCH_OCTEON \|\| ARCH_OCTEONTX \|\| ARCH_OCTEONTX2)
Suneel Garapati	7085989	2019-10-19 18:03:01 -0700	[diff] [blame]	339	depends on DM_MMC
				340	help
Stefan Roese	f9bb0ba	2021-03-12 09:48:25 +0100	[diff] [blame]	341	This selects the Octeon Multimedia card Interface.
				342	If you have an OcteonTX/TX2 or MIPS Octeon board with a
				343	Multimedia Card slot, say Y here.
Suneel Garapati	7085989	2019-10-19 18:03:01 -0700	[diff] [blame]	344
Felipe Balbi	b706b1c	2017-02-20 14:24:13 +0300	[diff] [blame]	345	If unsure, say N.
				346
Harm Berntsen	c689ae0	2021-03-30 10:19:41 +0200	[diff] [blame]	347	config MVEBU_MMC
				348	bool "Kirkwood MMC controller support"
				349	depends on DM_MMC && BLK && ARCH_KIRKWOOD
				350	help
				351	Support for MMC host controller on Kirkwood SoCs.
				352	If you are on a Kirkwood architecture, say Y here.
				353
				354	If unsure, say N.
				355
Masahiro Yamada	1d2c050	2017-01-10 13:32:07 +0900	[diff] [blame]	356	config MMC_OMAP_HS
				357	bool "TI OMAP High Speed Multimedia Card Interface support"
Simon Glass	e7881d8	2017-07-29 11:35:31 -0600	[diff] [blame]	358	select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Jean-Jacques Hiblot	8ff7763	2017-09-21 17:03:10 +0200	[diff] [blame]	359	select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Masahiro Yamada	1d2c050	2017-01-10 13:32:07 +0900	[diff] [blame]	360	help
				361	This selects the TI OMAP High Speed Multimedia card Interface.
				362	If you have an omap2plus board with a Multimedia Card slot,
				363	say Y here.
				364
				365	If unsure, say N.
				366
Jean-Jacques Hiblot	27a4b3b	2018-02-23 10:40:18 +0100	[diff] [blame]	367	config MMC_OMAP_HS_ADMA
				368	bool "ADMA support for OMAP HS MMC"
				369	depends on MMC_OMAP_HS && !OMAP34XX
				370	default y if !AM33XX
				371	help
				372	This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA
				373	controller). If supported by the hardware, selecting this option will
				374	increase performances.
				375
Adam Ford	6aca17c	2017-02-06 11:31:43 -0600	[diff] [blame]	376	config MMC_OMAP36XX_PINS
				377	bool "Enable MMC1 on OMAP36xx/37xx"
				378	depends on OMAP34XX && MMC_OMAP_HS
				379	help
				380	This enables extended-drain in the MMC/SD/SDIO1I/O and
				381	GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
				382	specific to the OMAP36xx/37xx using MMC1
				383
				384	If you have a controller with this interface, say Y here.
				385
				386	If unsure, say N.
				387
Nobuhiro Iwamatsu	72d42ba	2014-12-17 08:03:00 +0900	[diff] [blame]	388	config SH_SDHI
				389	bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
Marek Vasut	0f53118	2017-05-13 15:51:14 +0200	[diff] [blame]	390	depends on ARCH_RMOBILE
Nobuhiro Iwamatsu	72d42ba	2014-12-17 08:03:00 +0900	[diff] [blame]	391	help
				392	Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
				393
Marek Vasut	f3dca4a	2018-04-21 17:40:20 +0200	[diff] [blame]	394	config SH_MMCIF
				395	bool "SuperH/Renesas ARM SoCs on-chip MMCIF host controller support"
				396	depends on ARCH_RMOBILE \|\| SH
				397	help
				398	Support for the on-chip MMCIF host controller on SuperH/Renesas ARM SoCs platform
				399
Masahiro Yamada	a111bfb	2016-02-18 19:52:48 +0900	[diff] [blame]	400	config MMC_UNIPHIER
Marek Vasut	7dfddc0	2017-09-23 13:30:30 +0200	[diff] [blame]	401	bool "UniPhier SD/MMC Host Controller support"
				402	depends on ARCH_UNIPHIER
Simon Glass	e7881d8	2017-07-29 11:35:31 -0600	[diff] [blame]	403	depends on BLK && DM_MMC
Masahiro Yamada	9c720c8	2016-12-30 23:20:14 +0900	[diff] [blame]	404	depends on OF_CONTROL
Masahiro Yamada	a111bfb	2016-02-18 19:52:48 +0900	[diff] [blame]	405	help
Marek Vasut	b24633d	2017-07-21 23:24:36 +0200	[diff] [blame]	406	This selects support for the Matsushita SD/MMC Host Controller on
Marek Vasut	7dfddc0	2017-09-23 13:30:30 +0200	[diff] [blame]	407	SocioNext UniPhier SoCs.
				408
				409	config RENESAS_SDHI
				410	bool "Renesas R-Car SD/MMC Host Controller support"
				411	depends on ARCH_RMOBILE
				412	depends on BLK && DM_MMC
				413	depends on OF_CONTROL
Marek Vasut	d2661d8	2020-04-04 12:45:04 +0200	[diff] [blame]	414	select BOUNCE_BUFFER
Marek Vasut	7dfddc0	2017-09-23 13:30:30 +0200	[diff] [blame]	415	help
				416	This selects support for the Matsushita SD/MMC Host Controller on
				417	Renesas R-Car SoCs.
Masahiro Yamada	a111bfb	2016-02-18 19:52:48 +0900	[diff] [blame]	418
Alexander Graf	c8a73a2	2018-01-23 18:05:22 +0100	[diff] [blame]	419	config MMC_BCM2835
				420	bool "BCM2835 family custom SD/MMC Host Controller support"
				421	depends on ARCH_BCM283X
				422	depends on BLK && DM_MMC
				423	depends on OF_CONTROL
				424	default y
				425	help
				426	This selects support for the custom SD host controller in the BCM2835
				427	family of devices.
				428
				429	If you have a BCM2835 platform with SD or MMC devices, say Y here.
				430
				431	If unsure, say N.
				432
Paul Burton	d772713	2018-12-16 19:25:20 -0300	[diff] [blame]	433	config JZ47XX_MMC
				434	bool "Ingenic JZ47xx SD/MMC Host Controller support"
				435	depends on ARCH_JZ47XX
				436	help
				437	This selects support for the SD Card Controller on Ingenic JZ47xx SoCs.
				438
Masahiro Yamada	a5995a5	2017-01-30 19:46:50 +0900	[diff] [blame]	439	config MMC_SANDBOX
Simon Glass	f376a3c	2016-05-01 13:52:42 -0600	[diff] [blame]	440	bool "Sandbox MMC support"
Masahiro Yamada	a5995a5	2017-01-30 19:46:50 +0900	[diff] [blame]	441	depends on SANDBOX
Simon Glass	e7881d8	2017-07-29 11:35:31 -0600	[diff] [blame]	442	depends on BLK && DM_MMC && OF_CONTROL
Simon Glass	f376a3c	2016-05-01 13:52:42 -0600	[diff] [blame]	443	help
				444	This select a dummy sandbox MMC driver. At present this does nothing
				445	other than allow sandbox to be build with MMC support. This
				446	improves build coverage for sandbox and makes it easier to detect
				447	MMC build errors with sandbox.
				448
Masahiro Yamada	e1ce61f	2016-12-07 22:10:28 +0900	[diff] [blame]	449	config MMC_SDHCI
				450	bool "Secure Digital Host Controller Interface support"
				451	help
				452	This selects the generic Secure Digital Host Controller Interface.
				453	It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
				454	and Toshiba(R). Most controllers found in laptops are of this type.
				455
				456	If you have a controller with this interface, say Y here.
				457
				458	If unsure, say N.
				459
Masahiro Yamada	3d3a74c	2016-12-07 22:10:30 +0900	[diff] [blame]	460	config MMC_SDHCI_IO_ACCESSORS
				461	bool
				462	depends on MMC_SDHCI
				463	help
				464	This is silent Kconfig symbol that is selected by the drivers that
				465	need to overwrite SDHCI IO memory accessors.
				466
Masahiro Yamada	45a68fe	2016-12-07 22:10:29 +0900	[diff] [blame]	467	config MMC_SDHCI_SDMA
				468	bool "Support SDHCI SDMA"
				469	depends on MMC_SDHCI
				470	help
				471	This enables support for the SDMA (Single Operation DMA) defined
				472	in the SD Host Controller Standard Specification Version 1.00 .
				473
Faiz Abbas	37cb626	2019-04-16 23:06:58 +0530	[diff] [blame]	474	config MMC_SDHCI_ADMA
				475	bool "Support SDHCI ADMA2"
				476	depends on MMC_SDHCI
Michael Walle	4d6a773	2020-09-23 12:42:51 +0200	[diff] [blame]	477	select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas	37cb626	2019-04-16 23:06:58 +0530	[diff] [blame]	478	help
				479	This enables support for the ADMA (Advanced DMA) defined
				480	in the SD Host Controller Standard Specification Version 3.00
				481
				482	config SPL_MMC_SDHCI_ADMA
				483	bool "Support SDHCI ADMA2 in SPL"
Tom Rini	b340199	2022-06-10 23:03:09 -0400	[diff] [blame]	484	depends on SPL_MMC && MMC_SDHCI
Michael Walle	4d6a773	2020-09-23 12:42:51 +0200	[diff] [blame]	485	select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas	37cb626	2019-04-16 23:06:58 +0530	[diff] [blame]	486	help
				487	This enables support for the ADMA (Advanced DMA) defined
				488	in the SD Host Controller Standard Specification Version 3.00 in SPL.
				489
Chris Packham	b19512f	2022-05-29 11:13:17 +1200	[diff] [blame]	490	config FIXED_SDHCI_ALIGNED_BUFFER
				491	hex "SDRAM address for fixed buffer"
				492	depends on SPL && MVEBU_SPL_BOOT_DEVICE_MMC
				493	default 0x00180000
				494	help
				495	On the Marvell Armada 38x when the SPL runs it located in internal
				496	SRAM which is the L2 cache locked to memory. When the MMC buffers
				497	are located on the stack (or bss), the SDIO controller (SDHCI) can't
				498	write into this L2 cache memory.
				499
				500	This specifies the address of a fixed buffer located in SDRAM that
				501	will be used for all SDHCI transfers in the SPL.
				502
Eddie James	7764ee2	2019-08-27 09:48:03 -0500	[diff] [blame]	503	config MMC_SDHCI_ASPEED
				504	bool "Aspeed SDHCI controller"
				505	depends on ARCH_ASPEED
				506	depends on DM_MMC
				507	depends on MMC_SDHCI
Joel Stanley	66900bc	2022-06-23 18:35:34 +0930	[diff] [blame]	508	select MISC
Eddie James	7764ee2	2019-08-27 09:48:03 -0500	[diff] [blame]	509	help
				510	Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed
				511	SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
				512	specifications. On the AST2600, the device is also compatible with
				513	MMC 5.1 and eMMC 3.0.
				514
Masahiro Yamada	dd3b64e	2017-01-30 19:46:55 +0900	[diff] [blame]	515	config MMC_SDHCI_ATMEL
				516	bool "Atmel SDHCI controller support"
				517	depends on ARCH_AT91
Simon Glass	e7881d8	2017-07-29 11:35:31 -0600	[diff] [blame]	518	depends on DM_MMC && BLK && ARCH_AT91
Masahiro Yamada	dd3b64e	2017-01-30 19:46:55 +0900	[diff] [blame]	519	depends on MMC_SDHCI
				520	help
				521	This enables support for the Atmel SDHCI controller, which supports
				522	the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
				523	Memory Card Specification V3.0, and the SDIO V3.0 specification.
				524	It is compliant with the SD Host Controller Standard V3.0
				525	specification.
				526
Masahiro Yamada	45a68fe	2016-12-07 22:10:29 +0900	[diff] [blame]	527	config MMC_SDHCI_BCM2835
				528	tristate "SDHCI support for the BCM2835 SD/MMC Controller"
				529	depends on ARCH_BCM283X
				530	depends on MMC_SDHCI
Masahiro Yamada	3d3a74c	2016-12-07 22:10:30 +0900	[diff] [blame]	531	select MMC_SDHCI_IO_ACCESSORS
Masahiro Yamada	45a68fe	2016-12-07 22:10:29 +0900	[diff] [blame]	532	help
				533	This selects the BCM2835 SD/MMC controller.
				534
				535	If you have a BCM2835 platform with SD or MMC devices,
				536	say Y here.
				537
				538	If unsure, say N.
				539
Thomas Fitzsimmons	894c3ad	2018-06-08 17:59:45 -0400	[diff] [blame]	540	config MMC_SDHCI_BCMSTB
				541	tristate "SDHCI support for the BCMSTB SD/MMC Controller"
				542	depends on MMC_SDHCI
				543	help
				544	This selects the Broadcom set-top box SD/MMC controller.
				545
				546	If you have a BCMSTB platform with SD or MMC devices,
				547	say Y here.
				548
				549	If unsure, say N.
				550
Masahiro Yamada	e5e7a7c	2016-12-30 22:41:46 +0900	[diff] [blame]	551	config MMC_SDHCI_CADENCE
				552	bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
Simon Glass	e7881d8	2017-07-29 11:35:31 -0600	[diff] [blame]	553	depends on BLK && DM_MMC
Masahiro Yamada	e5e7a7c	2016-12-30 22:41:46 +0900	[diff] [blame]	554	depends on MMC_SDHCI
				555	depends on OF_CONTROL
				556	help
				557	This selects the Cadence SD/SDIO/eMMC driver.
				558
				559	If you have a controller with this interface, say Y here.
				560
				561	If unsure, say N.
				562
Faiz Abbas	3a1a0df	2019-06-11 00:43:31 +0530	[diff] [blame]	563	config MMC_SDHCI_AM654
				564	bool "SDHCI Controller on TI's Am654 devices"
Lokesh Vutla	aaa449f	2018-08-27 15:57:54 +0530	[diff] [blame]	565	depends on ARCH_K3
				566	depends on MMC_SDHCI
				567	depends on DM_MMC && OF_CONTROL && BLK
Faiz Abbas	ce142ff	2019-06-11 00:43:38 +0530	[diff] [blame]	568	depends on REGMAP
Faiz Abbas	27a87c8	2021-02-04 15:10:54 +0530	[diff] [blame]	569	select MMC_SDHCI_IO_ACCESSORS
Lokesh Vutla	aaa449f	2018-08-27 15:57:54 +0530	[diff] [blame]	570	help
Faiz Abbas	3a1a0df	2019-06-11 00:43:31 +0530	[diff] [blame]	571	Support for Secure Digital Host Controller Interface (SDHCI)
				572	controllers present on TI's AM654 SOCs.
Lokesh Vutla	aaa449f	2018-08-27 15:57:54 +0530	[diff] [blame]	573
Arun Parameswaran	36645f4	2019-09-12 11:06:08 -0700	[diff] [blame]	574	config MMC_SDHCI_IPROC
				575	bool "SDHCI support for the iProc SD/MMC Controller"
				576	depends on MMC_SDHCI
				577	help
				578	This selects the iProc SD/MMC controller.
				579
				580	If you have a Broadcom IPROC platform with SD or MMC devices,
				581	say Y or M here.
				582
				583	If unsure, say N.
				584
Jassi Brar	dadd43c	2021-06-04 18:44:16 +0900	[diff] [blame]	585	config MMC_SDHCI_F_SDH30
Kunihiko Hayashi	12fc8ef	2022-09-09 16:23:33 +0900	[diff] [blame]	586	bool "SDHCI support for Fujitsu Semiconductor/Socionext F_SDH30"
Jassi Brar	dadd43c	2021-06-04 18:44:16 +0900	[diff] [blame]	587	depends on BLK && DM_MMC
				588	depends on MMC_SDHCI
				589	help
				590	This selects the Secure Digital Host Controller Interface (SDHCI)
Kunihiko Hayashi	12fc8ef	2022-09-09 16:23:33 +0900	[diff] [blame]	591	Needed by some Fujitsu/Socionext SoC for MMC / SD / SDIO support.
Jassi Brar	dadd43c	2021-06-04 18:44:16 +0900	[diff] [blame]	592	If you have a controller with this interface, say Y or M here.
				593	If unsure, say N.
				594
Masahiro Yamada	45a68fe	2016-12-07 22:10:29 +0900	[diff] [blame]	595	config MMC_SDHCI_KONA
				596	bool "SDHCI support on Broadcom KONA platform"
				597	depends on MMC_SDHCI
				598	help
				599	This selects the Broadcom Kona Secure Digital Host Controller
				600	Interface(SDHCI) support.
				601	This is used in Broadcom mobile SoCs.
				602
				603	If you have a controller with this interface, say Y here.
				604
Masahiro Yamada	360c67d	2017-01-30 19:46:53 +0900	[diff] [blame]	605	config MMC_SDHCI_MSM
				606	bool "Qualcomm SDHCI controller"
Simon Glass	e7881d8	2017-07-29 11:35:31 -0600	[diff] [blame]	607	depends on BLK && DM_MMC
Masahiro Yamada	360c67d	2017-01-30 19:46:53 +0900	[diff] [blame]	608	depends on MMC_SDHCI
				609	help
				610	Enables support for SDHCI 2.0 controller present on some Qualcomm
				611	Snapdragon devices. This device is compatible with eMMC v4.5 and
				612	SD 3.0 specifications. Both SD and eMMC devices are supported.
				613	Card-detect gpios are not supported.
				614
Masahiro Yamada	45a68fe	2016-12-07 22:10:29 +0900	[diff] [blame]	615	config MMC_SDHCI_MV
				616	bool "SDHCI support on Marvell platform"
				617	depends on ARCH_MVEBU
				618	depends on MMC_SDHCI
				619	help
				620	This selects the Secure Digital Host Controller Interface on
				621	Marvell platform.
				622
				623	If you have a controller with this interface, say Y here.
				624
				625	If unsure, say N.
				626
Jim Liu	3363a73	2022-05-24 16:55:33 +0800	[diff] [blame]	627	config MMC_SDHCI_NPCM
				628	bool "SDHCI support on Nuvoton NPCM device"
				629	depends on MMC_SDHCI
				630	depends on DM_MMC
				631	help
				632	This selects the Secure Digital Host Controller Interface (SDHCI)
				633	on Nuvoton NPCM device.
				634
				635	If you have a controller with this interface, say Y here.
				636
				637	If unsure, say N.
				638
Masahiro Yamada	1b85877	2017-01-30 19:46:54 +0900	[diff] [blame]	639	config MMC_SDHCI_PIC32
				640	bool "Microchip PIC32 on-chip SDHCI support"
				641	depends on DM_MMC && MACH_PIC32
				642	depends on MMC_SDHCI
				643	help
				644	Support for Microchip PIC32 SDHCI controller.
				645
Masahiro Yamada	facc805	2017-01-30 19:46:52 +0900	[diff] [blame]	646	config MMC_SDHCI_ROCKCHIP
				647	bool "Arasan SDHCI controller for Rockchip support"
				648	depends on ARCH_ROCKCHIP
Simon Glass	e7881d8	2017-07-29 11:35:31 -0600	[diff] [blame]	649	depends on DM_MMC && BLK
Masahiro Yamada	facc805	2017-01-30 19:46:52 +0900	[diff] [blame]	650	depends on MMC_SDHCI
				651	help
				652	Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
				653
Masahiro Yamada	45a68fe	2016-12-07 22:10:29 +0900	[diff] [blame]	654	config MMC_SDHCI_S5P
				655	bool "SDHCI support on Samsung S5P SoC"
				656	depends on MMC_SDHCI
				657	help
				658	This selects the Secure Digital Host Controller Interface (SDHCI)
				659	on Samsung S5P SoCs.
				660
				661	If you have a controller with this interface, say Y here.
				662
				663	If unsure, say N.
				664
				665	config MMC_SDHCI_SPEAR
				666	bool "SDHCI support on ST SPEAr platform"
				667	depends on MMC_SDHCI
				668	help
				669	This selects the Secure Digital Host Controller Interface (SDHCI)
				670	often referrered to as the HSMMC block in some of the ST SPEAR range
				671	of SoC
				672
				673	If you have a controller with this interface, say Y here.
				674
				675	If unsure, say N.
				676
Patrice Chotard	eee20f8	2017-02-21 13:37:09 +0100	[diff] [blame]	677	config MMC_SDHCI_STI
				678	bool "SDHCI support for STMicroelectronics SoC"
Patrice Chotard	51cb23d	2017-02-21 13:37:11 +0100	[diff] [blame]	679	depends on MMC_SDHCI && OF_CONTROL
Patrice Chotard	eee20f8	2017-02-21 13:37:09 +0100	[diff] [blame]	680	help
				681	This selects the Secure Digital Host Controller Interface (SDHCI)
				682	on STMicroelectronics STiH410 SoC.
				683
Stefan Roese	b6acb5f	2016-12-09 15:03:28 +0100	[diff] [blame]	684	config MMC_SDHCI_XENON
				685	bool "SDHCI support for the Xenon SDHCI controller"
				686	depends on MMC_SDHCI && DM_MMC && OF_CONTROL
				687	help
				688	Support for Xenon SDHCI host controller on Marvell Armada 3700
				689	7k/8k ARM SoCs platforms
				690
				691	If you have a controller with this interface, say Y here.
				692
				693	If unsure, say N.
				694
Felipe Balbi	83b3248	2017-02-20 14:24:14 +0300	[diff] [blame]	695	config MMC_SDHCI_TANGIER
				696	bool "Tangier SDHCI controller support"
				697	depends on DM_MMC && BLK
				698	depends on MMC_SDHCI
				699	help
				700	This selects support for SDHCI controller on Tanginer
				701	SoC. Note that this controller does not sit on PCI bus and,
				702	hence, cannot be enumerated by standard PCI means.
				703
				704	If you're using an Intel Tangier SoC (available on Intel
				705	Edison board), say Y here.
				706
				707	If unsure, say N.
				708
Masahiro Yamada	1d2c050	2017-01-10 13:32:07 +0900	[diff] [blame]	709	config MMC_SDHCI_TEGRA
				710	bool "SDHCI platform support for the Tegra SD/MMC Controller"
Trevor Woerner	18138ab	2020-05-06 08:02:41 -0400	[diff] [blame]	711	depends on ARCH_TEGRA
Philipp Tomsich	2acc24f	2018-11-30 22:13:25 +0100	[diff] [blame]	712	select BOUNCE_BUFFER
Masahiro Yamada	1d2c050	2017-01-10 13:32:07 +0900	[diff] [blame]	713	default y
				714	help
				715	This selects the Tegra SD/MMC controller. If you have a Tegra
				716	platform with SD or MMC devices, say Y here.
				717
				718	If unsure, say N.
				719
Trent Piepho	b78d97e	2019-04-01 23:05:49 +0000	[diff] [blame]	720	config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
				721	bool "Disable external clock loopback"
				722	depends on MMC_SDHCI_TEGRA && TEGRA124
				723	help
				724	Disable the external clock loopback and use the internal one on SDMMC3
				725	as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
				726	being set to 0xfffd according to the TRM.
				727
				728	TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
				729	approach once proper kernel integration made it mainline.
				730
Masahiro Yamada	08aa033	2017-01-30 19:46:51 +0900	[diff] [blame]	731	config MMC_SDHCI_ZYNQ
				732	bool "Arasan SDHCI controller support"
Simon Glass	e7881d8	2017-07-29 11:35:31 -0600	[diff] [blame]	733	depends on DM_MMC && OF_CONTROL && BLK
Masahiro Yamada	08aa033	2017-01-30 19:46:51 +0900	[diff] [blame]	734	depends on MMC_SDHCI
				735	help
				736	Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
				737
Vipul Kumar	5dc5a53	2018-02-28 15:53:28 +0530	[diff] [blame]	738	config ZYNQ_SDHCI_MAX_FREQ
				739	int "Set the maximum frequency of the controller"
				740	depends on MMC_SDHCI_ZYNQ
				741	help
				742	Set the maximum frequency of the controller.
				743
Vipul Kumar	3ccc207	2018-02-28 15:53:29 +0530	[diff] [blame]	744	config ZYNQ_SDHCI_MIN_FREQ
				745	int "Set the minimum frequency of the controller"
				746	depends on MMC_SDHCI_ZYNQ
				747	default 0
				748	help
				749	Set the minimum frequency of the controller.
				750
Siva Durga Prasad Paladugu	d882f08	2019-05-27 14:33:14 +0530	[diff] [blame]	751	config ZYNQ_HISPD_BROKEN
				752	bool "High speed broken for Zynq SDHCI controller"
				753	depends on MMC_SDHCI_ZYNQ
				754	help
				755	Set if high speed mode is broken.
				756
Masahiro Yamada	1d2c050	2017-01-10 13:32:07 +0900	[diff] [blame]	757	config MMC_SUNXI
				758	bool "Allwinner sunxi SD/MMC Host Controller support"
Samuel Holland	818e163	2022-04-10 00:13:34 -0500	[diff] [blame]	759	depends on ARCH_SUNXI
Masahiro Yamada	1d2c050	2017-01-10 13:32:07 +0900	[diff] [blame]	760	default y
				761	help
				762	This selects support for the SD/MMC Host Controller on
				763	Allwinner sunxi SoCs.
				764
Maxime Ripard	de9b177	2017-08-23 12:03:41 +0200	[diff] [blame]	765	config MMC_SUNXI_HAS_NEW_MODE
				766	bool
				767	depends on MMC_SUNXI
				768
Vasily Khoruzhick	2a8882e	2018-11-09 20:41:44 -0800	[diff] [blame]	769	config MMC_SUNXI_HAS_MODE_SWITCH
				770	bool
				771	depends on MMC_SUNXI
				772
Tianrui Wei	d6b156e	2021-07-01 12:54:20 +0800	[diff] [blame]	773	config MMC_PITON
				774	bool "MMC support for OpenPiton SoC"
				775	depends on DM_MMC && BLK
				776	help
				777	This selects support for the SD host controller on OpenPiton SoC.
				778	Note that this SD controller directly exposes the contents of the
				779	SD card as memory mapped, so there is no manual configuration
				780	required
				781
Wenyou Yang	c86c015	2017-04-13 10:29:22 +0800	[diff] [blame]	782	config GENERIC_ATMEL_MCI
				783	bool "Atmel Multimedia Card Interface support"
Simon Glass	e7881d8	2017-07-29 11:35:31 -0600	[diff] [blame]	784	depends on DM_MMC && BLK && ARCH_AT91
Wenyou Yang	c86c015	2017-04-13 10:29:22 +0800	[diff] [blame]	785	help
				786	This enables support for Atmel High Speed Multimedia Card Interface
				787	(HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
				788	the SD Memory Card Specification V2.0, the SDIO V2.0 specification
				789	and CE-ATA V1.1.
				790
Patrice Chotard	b312c59	2017-09-04 17:56:22 +0200	[diff] [blame]	791	config STM32_SDMMC2
				792	bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
Patrice Chotard	53c656a	2017-10-03 15:54:58 +0200	[diff] [blame]	793	depends on DM_MMC && BLK && OF_CONTROL
Patrice Chotard	b312c59	2017-09-04 17:56:22 +0200	[diff] [blame]	794	help
				795	This selects support for the SD/MMC controller on STM32H7 SoCs.
				796	If you have a board based on such a SoC and with a SD/MMC slot,
				797	say Y or M here.
				798
Rick Chen	9f678ab	2017-11-14 14:47:09 +0800	[diff] [blame]	799	config FTSDC010
				800	bool "Ftsdc010 SD/MMC controller Support"
				801	help
				802	This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
				803
Rick Chen	095c9f3	2018-03-20 15:10:49 +0800	[diff] [blame]	804	config FTSDC010_SDIO
				805	bool "Support ftsdc010 sdio"
Rick Chen	095c9f3	2018-03-20 15:10:49 +0800	[diff] [blame]	806	depends on FTSDC010
				807	help
				808	This can enable ftsdc010 sdio function.
				809
Weijie Gao	d24b693	2018-11-15 10:08:04 +0800	[diff] [blame]	810	config MMC_MTK
				811	bool "MediaTek SD/MMC Card Interface support"
Weijie Gao	3c92a95	2019-09-25 17:45:37 +0800	[diff] [blame]	812	depends on ARCH_MEDIATEK \|\| ARCH_MTMIPS
Weijie Gao	d24b693	2018-11-15 10:08:04 +0800	[diff] [blame]	813	depends on BLK && DM_MMC
				814	depends on OF_CONTROL
				815	help
				816	This selects the MediaTek(R) Secure digital and Multimedia card Interface.
				817	If you have a machine with a integrated SD/MMC card reader, say Y or M here.
				818	This is needed if support for any SD/SDIO/MMC devices is required.
				819	If unsure, say N.
				820
Masahiro Yamada	e298c46	2016-12-07 22:10:27 +0900	[diff] [blame]	821	endif
				822
Mario Six	07dea2e	2018-03-28 14:38:19 +0200	[diff] [blame]	823	config FSL_ESDHC
				824	bool "Freescale/NXP eSDHC controller support"
				825	help
Yangbo Lu	fa33d20	2019-06-21 11:42:27 +0800	[diff] [blame]	826	This selects support for the eSDHC (Enhanced Secure Digital Host
				827	Controller) found on numerous Freescale/NXP SoCs.
				828
Michael Walle	361a422	2020-10-12 10:07:14 +0200	[diff] [blame]	829	config FSL_ESDHC_SUPPORT_ADMA2
				830	bool "enable ADMA2 support"
				831	depends on FSL_ESDHC
				832	select MMC_SDHCI_ADMA_HELPERS
				833	help
				834	This enables support for the ADMA2 transfer mode. If supported by the
				835	eSDHC it will allow 64bit DMA addresses.
				836
Yangbo Lu	c927d65	2020-05-19 11:06:44 +0800	[diff] [blame]	837	config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
				838	bool "enable eSDHC workaround for 3.3v IO reliability issue"
				839	depends on FSL_ESDHC && DM_MMC
Yangbo Lu	c927d65	2020-05-19 11:06:44 +0800	[diff] [blame]	840	help
				841	When eSDHC operates at 3.3v, damage can accumulate in an internal
				842	level shifter at a higher than expected rate. The faster the interface
				843	runs, the more damage accumulates. This issue now is found on LX2160A
				844	eSDHC1 for only SD card. The hardware workaround is recommended to use
				845	an on-board level shifter that is 1.8v on SoC side and 3.3v on SD card
				846	side. For boards without hardware workaround, this option could be
				847	enabled, ensuring 1.8v IO voltage and disabling eSDHC if no card.
				848	This option assumes no hotplug, and u-boot has to make all the way to
				849	to linux to use 1.8v UHS-I speed mode if has card.
				850
Yangbo Lu	ae7020b	2021-06-03 10:51:17 +0800	[diff] [blame]	851	config FSL_ESDHC_VS33_NOT_SUPPORT
				852	bool "3.3V power supply not supported"
				853	depends on FSL_ESDHC
				854	help
				855	For eSDHC, power supply is through peripheral circuit. 3.3V support is
				856	common. Select this if 3.3V power supply not supported.
				857
Pali Rohár	8f3f8ba	2022-05-11 20:27:13 +0200	[diff] [blame]	858	config SYS_FSL_ESDHC_DEFAULT_BUS_WIDTH
				859	int
				860	depends on FSL_ESDHC
				861	default 1
				862
Tom Rini	7e7d04a	2022-06-16 14:04:38 -0400	[diff] [blame]	863	config ESDHC_DETECT_QUIRK
				864	bool "QIXIS-based eSDHC quirk detection"
				865	depends on FSL_ESDHC && FSL_QIXIS
				866
Yangbo Lu	fa33d20	2019-06-21 11:42:27 +0800	[diff] [blame]	867	config FSL_ESDHC_IMX
				868	bool "Freescale/NXP i.MX eSDHC controller support"
				869	help
				870	This selects support for the i.MX eSDHC (Enhanced Secure Digital Host
				871	Controller) found on numerous Freescale/NXP SoCs.
Mario Six	07dea2e	2018-03-28 14:38:19 +0200	[diff] [blame]	872
Tom Rini	7ae1e6a	2022-07-31 21:08:25 -0400	[diff] [blame]	873	config SYS_FSL_ESDHC_HAS_DDR_MODE
				874	bool "i.MX eSDHC controller supports DDR mode"
				875	depends on FSL_ESDHC_IMX
				876
Adam Ford	3f70bef	2019-08-14 07:23:43 -0500	[diff] [blame]	877	config FSL_USDHC
				878	bool "Freescale/NXP i.MX uSDHC controller support"
Peng Fan	c8671d2	2022-07-26 16:40:44 +0800	[diff] [blame]	879	depends on MX6 \|\| MX7 \|\|ARCH_MX7ULP \|\| IMX8 \|\| IMX8M \|\| IMX8ULP \|\| IMX9 \|\| IMXRT
Adam Ford	3f70bef	2019-08-14 07:23:43 -0500	[diff] [blame]	880	select FSL_ESDHC_IMX
				881	help
				882	This enables the Ultra Secured Digital Host Controller enhancements
				883
Nobuhiro Iwamatsu	72d42ba	2014-12-17 08:03:00 +0900	[diff] [blame]	884	endmenu
York Sun	c01e4a1	2016-12-28 08:43:42 -0800	[diff] [blame]	885
				886	config SYS_FSL_ERRATUM_ESDHC111
				887	bool
				888
				889	config SYS_FSL_ERRATUM_ESDHC13
				890	bool
				891
				892	config SYS_FSL_ERRATUM_ESDHC135
				893	bool
				894
				895	config SYS_FSL_ERRATUM_ESDHC_A001
				896	bool
Michael Walle	bd7b850	2021-03-17 15:01:36 +0100	[diff] [blame]	897
				898	config SYS_FSL_ERRATUM_A011334
				899	bool
Michael Walle	d3b745f	2021-03-17 15:01:37 +0100	[diff] [blame]	900
				901	config SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
				902	bool