blob: 43bfabffcc93791fa7bde514c47ccf874a4be5b7 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0 */
Simon Glass18739e22014-11-14 18:18:43 -07002/*
3 * From Coreboot file of same name
4 *
5 * Copyright (C) 2007-2009 coresystems GmbH
6 * 2012 secunet Security Networks AG
Simon Glass18739e22014-11-14 18:18:43 -07007 */
8
9#ifndef _ASM_SPEEDSTEP_H
10#define _ASM_SPEEDSTEP_H
11
12/* Magic value used to locate speedstep configuration in the device tree */
13#define SPEEDSTEP_APIC_MAGIC 0xACAC
14
15/* MWAIT coordination I/O base address. This must match
16 * the \_PR_.CPU0 PM base address.
17 */
18#define PMB0_BASE 0x510
19
20/* PMB1: I/O port that triggers SMI once cores are in the same state.
21 * See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4]
22 */
23#define PMB1_BASE 0x800
24
25struct sst_state {
26 uint8_t dynfsb:1; /* whether this is SLFM */
27 uint8_t nonint:1; /* add .5 to ratio */
28 uint8_t ratio:6;
29 uint8_t vid;
30 uint8_t is_turbo;
31 uint8_t is_slfm;
32 uint32_t power;
33};
34#define SPEEDSTEP_RATIO_SHIFT 8
35#define SPEEDSTEP_RATIO_DYNFSB_SHIFT (7 + SPEEDSTEP_RATIO_SHIFT)
36#define SPEEDSTEP_RATIO_DYNFSB (1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT)
37#define SPEEDSTEP_RATIO_NONINT_SHIFT (6 + SPEEDSTEP_RATIO_SHIFT)
38#define SPEEDSTEP_RATIO_NONINT (1 << SPEEDSTEP_RATIO_NONINT_SHIFT)
39#define SPEEDSTEP_RATIO_VALUE_MASK (0x1f << SPEEDSTEP_RATIO_SHIFT)
40#define SPEEDSTEP_VID_MASK 0x3f
41#define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((struct sst_state){ \
42 0, /* dynfsb won't be read. */ \
43 ((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0, \
44 (((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK) \
45 >> SPEEDSTEP_RATIO_SHIFT), \
46 (val & mask) & SPEEDSTEP_VID_MASK, \
47 0, /* not turbo by default */ \
48 0, /* not slfm by default */ \
49 0 /* power is hardcoded in software. */ \
50 })
51#define SPEEDSTEP_ENCODE_STATE(state) ( \
52 ((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) | \
53 ((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) | \
54 ((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) | \
55 ((uint16_t)(state).vid & SPEEDSTEP_VID_MASK))
56#define SPEEDSTEP_DOUBLE_RATIO(state) ( \
57 ((uint8_t)(state).ratio * 2) + (state).nonint)
58
59struct sst_params {
60 struct sst_state slfm;
61 struct sst_state min;
62 struct sst_state max;
63 struct sst_state turbo;
64};
65
66/* Looking at core2's spec, the highest normal bus ratio for an eist enabled
67 processor is 14, the lowest is always 6. This makes 5 states with the
68 minimal step width of 2. With turbo mode and super LFM we have at most 7. */
69#define SPEEDSTEP_MAX_NORMAL_STATES 5
70#define SPEEDSTEP_MAX_STATES (SPEEDSTEP_MAX_NORMAL_STATES + 2)
71struct sst_table {
72 /* Table of p-states for EMTTM and ACPI by decreasing performance. */
73 struct sst_state states[SPEEDSTEP_MAX_STATES];
74 int num_states;
75};
76
77void speedstep_gen_pstates(struct sst_table *);
78
79#define SPEEDSTEP_MAX_POWER_YONAH 31000
80#define SPEEDSTEP_MIN_POWER_YONAH 13100
81#define SPEEDSTEP_MAX_POWER_MEROM 35000
82#define SPEEDSTEP_MIN_POWER_MEROM 25000
83#define SPEEDSTEP_SLFM_POWER_MEROM 12000
84#define SPEEDSTEP_MAX_POWER_PENRYN 35000
85#define SPEEDSTEP_MIN_POWER_PENRYN 15000
86#define SPEEDSTEP_SLFM_POWER_PENRYN 12000
87
88#endif