blob: db1f55c84a071fe5c17919959dc5bdbd1560dec8 [file] [log] [blame]
Jon Loeligerec63b102007-06-11 19:01:34 -05001/*
2 * Copyright 2007 Freescale Semiconductor, Inc.
3 *
4 * This file is licensed under the terms of the GNU General Public
5 * License Version 2. This file is licensed "as is" without any
6 * warranty of any kind, whether express or implied.
7 */
8
9#ifndef _CONFIG_CMD_ALL_H
10#define _CONFIG_CMD_ALL_H
11
12/*
13 * Alphabetical list of all possible commands.
14 */
15
Daniel Hellstrom2a2fa792008-03-26 23:00:38 +010016#define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */
Jon Loeligerec63b102007-06-11 19:01:34 -050017#define CONFIG_CMD_ASKENV /* ask for env variable */
18#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
Wolfgang Denk53677ef2008-05-20 16:00:29 +020019#define CONFIG_CMD_BDI /* bdinfo */
Jon Loeligerec63b102007-06-11 19:01:34 -050020#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */
21#define CONFIG_CMD_BMP /* BMP support */
22#define CONFIG_CMD_BOOTD /* bootd */
23#define CONFIG_CMD_BSP /* Board Specific functions */
24#define CONFIG_CMD_CACHE /* icache, dcache */
Wolfgang Denk53677ef2008-05-20 16:00:29 +020025#define CONFIG_CMD_CDP /* Cisco Discovery Protocol */
Jon Loeligerec63b102007-06-11 19:01:34 -050026#define CONFIG_CMD_CONSOLE /* coninfo */
27#define CONFIG_CMD_DATE /* support for RTC, date/time...*/
28#define CONFIG_CMD_DHCP /* DHCP Support */
29#define CONFIG_CMD_DIAG /* Diagnostics */
30#define CONFIG_CMD_DISPLAY /* Display support */
31#define CONFIG_CMD_DOC /* Disk-On-Chip Support */
32#define CONFIG_CMD_DTT /* Digital Therm and Thermostat */
33#define CONFIG_CMD_ECHO /* echo arguments */
34#define CONFIG_CMD_EEPROM /* EEPROM read/write support */
35#define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */
Mike Frysingerbdab39d2009-01-28 19:08:14 -050036#define CONFIG_CMD_SAVEENV /* saveenv */
Jon Loeligerec63b102007-06-11 19:01:34 -050037#define CONFIG_CMD_EXT2 /* EXT2 Support */
38#define CONFIG_CMD_FAT /* FAT support */
39#define CONFIG_CMD_FDC /* Floppy Disk Support */
40#define CONFIG_CMD_FDOS /* Floppy DOS support */
41#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
42#define CONFIG_CMD_FPGA /* FPGA configuration Support */
43#define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */
44#define CONFIG_CMD_I2C /* I2C serial bus support */
45#define CONFIG_CMD_IDE /* IDE harddisk support */
46#define CONFIG_CMD_IMI /* iminfo */
47#define CONFIG_CMD_IMLS /* List all found images */
48#define CONFIG_CMD_IMMAP /* IMMR dump support */
49#define CONFIG_CMD_IRQ /* irqinfo */
50#define CONFIG_CMD_ITEST /* Integer (and string) test */
51#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
52#define CONFIG_CMD_KGDB /* kgdb */
Harald Welte0a823aa2008-07-09 22:30:30 +080053#define CONFIG_CMD_LICENSE /* console license display */
Jon Loeligerec63b102007-06-11 19:01:34 -050054#define CONFIG_CMD_LOADB /* loadb */
55#define CONFIG_CMD_LOADS /* loads */
56#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
57#define CONFIG_CMD_MFSL /* FSL support for Microblaze */
58#define CONFIG_CMD_MII /* MII support */
59#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
60#define CONFIG_CMD_MMC /* MMC support */
Stefan Roese68d7d652009-03-19 13:30:36 +010061#define CONFIG_CMD_MTDPARTS /* mtd parts support */
Jon Loeligerec63b102007-06-11 19:01:34 -050062#define CONFIG_CMD_NAND /* NAND support */
63#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
64#define CONFIG_CMD_NFS /* NFS support */
Kyungmin Parkd7e8ce12007-09-10 17:15:14 +090065#define CONFIG_CMD_ONENAND /* OneNAND support */
Jon Loeligerec63b102007-06-11 19:01:34 -050066#define CONFIG_CMD_PCI /* pciinfo */
67#define CONFIG_CMD_PCMCIA /* PCMCIA support */
68#define CONFIG_CMD_PING /* ping support */
69#define CONFIG_CMD_PORTIO /* Port I/O */
70#define CONFIG_CMD_REGINFO /* Register dump */
71#define CONFIG_CMD_REISER /* Reiserfs support */
72#define CONFIG_CMD_RUN /* run command in env variable */
73#define CONFIG_CMD_SAVES /* save S record dump */
74#define CONFIG_CMD_SCSI /* SCSI Support */
75#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
Wolfgang Denk53677ef2008-05-20 16:00:29 +020076#define CONFIG_CMD_SETEXPR /* setexpr support */
Jon Loeligerec63b102007-06-11 19:01:34 -050077#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
78#define CONFIG_CMD_SNTP /* SNTP support */
79#define CONFIG_CMD_SPI /* SPI utility */
Harald Welted16471e2007-12-19 14:14:47 +010080#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */
Jon Loeligerec63b102007-06-11 19:01:34 -050081#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */
Harald Weltefe2ce552008-07-06 15:56:38 +080082#define CONFIG_CMD_UNZIP /* unzip from memory to memory */
Jon Loeligerec63b102007-06-11 19:01:34 -050083#define CONFIG_CMD_USB /* USB Support */
84#define CONFIG_CMD_VFD /* VFD support (TRAB) */
85#define CONFIG_CMD_XIMG /* Load part of Multi Image */
Peter Pearse557ab892007-09-04 14:23:50 +010086#define CONFIG_CMD_AT91_SPIMUX /* AT91 MMC/SPI Mux Support */
Jon Loeligerec63b102007-06-11 19:01:34 -050087
88#endif /* _CONFIG_CMD_ALL_H */