blob: 2b3326bc152bf704e3fe322f6b48a667899a1c80 [file] [log] [blame]
wdenk998eaae2004-04-18 19:43:36 +00001JFFS2 NAND support:
2
3To ebable, use the following #define in the board configuration file:
4
5#define CONFIG_JFFS2_NAND 1
6
7Configuration of partitions is similar to how this is done in U-Boot
8for JFFS2 on top NOR flash. If a single parition is used, it can be
9configured using the following #defines in the configuration file:
10
11#define CONFIG_JFFS2_NAND_DEV 0 /* nand device jffs2 lives on */
12#define CONFIG_JFFS2_NAND_OFF 0 /* start of jffs2 partition */
13#define CONFIG_JFFS2_NAND_SIZE 2*1024*1024 /* size of jffs2 partition */
14
15If more than a single partition is desired, the user can define a
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020016CONFIG_SYS_JFFS_CUSTOM_PART macro and implement a
wdenk998eaae2004-04-18 19:43:36 +000017
18 struct part_info* jffs2_part_info(int part_num)
19
20function in a board-specific module. An example of such function is
21available in common/cmd_jffs2.c
22
23The default configuration for the DAVE board has a single JFFS2
24partition of 2 MB size.