blob: a79b80ca1ecdb798babdb763bf56de3637f0defd [file] [log] [blame]
Ian Campbella6e50a82014-07-18 20:38:41 +01001#include <common.h>
2#include <ahci.h>
Simon Glasscf7b2e12017-07-04 13:31:31 -06003#include <dm.h>
Ian Campbella6e50a82014-07-18 20:38:41 +01004#include <scsi.h>
5#include <errno.h>
6#include <asm/io.h>
7#include <asm/gpio.h>
8
9#define AHCI_PHYCS0R 0x00c0
10#define AHCI_PHYCS1R 0x00c4
11#define AHCI_PHYCS2R 0x00c8
12#define AHCI_RWCR 0x00fc
13
14/* This magic PHY initialisation was taken from the Allwinner releases
15 * and Linux driver, but is completely undocumented.
16 */
Simon Glasscf7b2e12017-07-04 13:31:31 -060017static int sunxi_ahci_phy_init(u8 *reg_base)
Ian Campbella6e50a82014-07-18 20:38:41 +010018{
Ian Campbella6e50a82014-07-18 20:38:41 +010019 u32 reg_val;
20 int timeout;
21
22 writel(0, reg_base + AHCI_RWCR);
23 mdelay(5);
24
25 setbits_le32(reg_base + AHCI_PHYCS1R, 0x1 << 19);
26 clrsetbits_le32(reg_base + AHCI_PHYCS0R,
27 (0x7 << 24),
28 (0x5 << 24) | (0x1 << 23) | (0x1 << 18));
29 clrsetbits_le32(reg_base + AHCI_PHYCS1R,
30 (0x3 << 16) | (0x1f << 8) | (0x3 << 6),
31 (0x2 << 16) | (0x6 << 8) | (0x2 << 6));
32 setbits_le32(reg_base + AHCI_PHYCS1R, (0x1 << 28) | (0x1 << 15));
33 clrbits_le32(reg_base + AHCI_PHYCS1R, (0x1 << 19));
34 clrsetbits_le32(reg_base + AHCI_PHYCS0R, (0x7 << 20), (0x3 << 20));
35 clrsetbits_le32(reg_base + AHCI_PHYCS2R, (0x1f << 5), (0x19 << 5));
36 mdelay(5);
37
38 setbits_le32(reg_base + AHCI_PHYCS0R, (0x1 << 19));
39
40 timeout = 250; /* Power up takes approx 50 us */
41 for (;;) {
42 reg_val = readl(reg_base + AHCI_PHYCS0R) & (0x7 << 28);
43 if (reg_val == (0x2 << 28))
44 break;
45 if (--timeout == 0) {
46 printf("AHCI PHY power up failed.\n");
47 return -EIO;
48 }
49 udelay(1);
50 };
51
52 setbits_le32(reg_base + AHCI_PHYCS2R, (0x1 << 24));
53
54 timeout = 100; /* Calibration takes approx 10 us */
55 for (;;) {
56 reg_val = readl(reg_base + AHCI_PHYCS2R) & (0x1 << 24);
57 if (reg_val == 0x0)
58 break;
59 if (--timeout == 0) {
60 printf("AHCI PHY calibration failed.\n");
61 return -EIO;
62 }
63 udelay(1);
64 }
65
66 mdelay(15);
67
68 writel(0x7, reg_base + AHCI_RWCR);
69
70 return 0;
71}
72
Simon Glasscf7b2e12017-07-04 13:31:31 -060073#ifndef CONFIG_DM_SCSI
Ian Campbella6e50a82014-07-18 20:38:41 +010074void scsi_init(void)
75{
Simon Glasscf7b2e12017-07-04 13:31:31 -060076 if (sunxi_ahci_phy_init((u8 *)SUNXI_SATA_BASE) < 0)
Ian Campbella6e50a82014-07-18 20:38:41 +010077 return;
78
Scott Wood9efaca32015-04-17 09:19:01 -050079 ahci_init((void __iomem *)SUNXI_SATA_BASE);
Ian Campbella6e50a82014-07-18 20:38:41 +010080}
Simon Glasscf7b2e12017-07-04 13:31:31 -060081#else
82static int sunxi_sata_probe(struct udevice *dev)
83{
84 ulong base;
85 u8 *reg;
86 int ret;
87
88 base = dev_read_addr(dev);
89 if (base == FDT_ADDR_T_NONE) {
90 debug("%s: Failed to find address (err=%d\n)", __func__, ret);
91 return -EINVAL;
92 }
93 reg = (u8 *)base;
94 ret = sunxi_ahci_phy_init(reg);
95 if (ret) {
96 debug("%s: Failed to init phy (err=%d\n)", __func__, ret);
97 return ret;
98 }
99 ret = ahci_probe_scsi(dev, base);
100 if (ret) {
101 debug("%s: Failed to probe (err=%d\n)", __func__, ret);
102 return ret;
103 }
104
105 return 0;
106}
107
108static int sunxi_sata_bind(struct udevice *dev)
109{
110 struct udevice *scsi_dev;
111 int ret;
112
113 ret = ahci_bind_scsi(dev, &scsi_dev);
114 if (ret) {
115 debug("%s: Failed to bind (err=%d\n)", __func__, ret);
116 return ret;
117 }
118
119 return 0;
120}
121
122static const struct udevice_id sunxi_ahci_ids[] = {
123 { .compatible = "allwinner,sun4i-a10-ahci" },
124 { }
125};
126
127U_BOOT_DRIVER(ahci_sunxi_drv) = {
128 .name = "ahci_sunxi",
129 .id = UCLASS_AHCI,
130 .of_match = sunxi_ahci_ids,
131 .bind = sunxi_sata_bind,
132 .probe = sunxi_sata_probe,
133};
134#endif