blob: 8d2db27ecb98f6688dd66936c485faeb4d35a8cf [file] [log] [blame]
Tapani Utriainen550e3752013-12-04 09:27:33 +01001/*
2 * Configuration settings for the TechNexion TAO-3530 SOM
3 * equipped on Thunder baseboard.
4 *
5 * Edward Lin <linuxfae@technexion.com>
6 * Tapani Utriainen <linuxfae@technexion.com>
7 *
Stefan Roesea9f52492013-12-04 09:27:34 +01008 * Copyright (C) 2013 Stefan Roese <sr@denx.de>
9 *
Tapani Utriainen550e3752013-12-04 09:27:33 +010010 * SPDX-License-Identifier: GPL-2.0+
11 */
12
13#ifndef __CONFIG_H
14#define __CONFIG_H
15
16/*
17 * High Level Configuration Options
18 */
19#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */
20#define CONFIG_OMAP /* in a TI OMAP core */
Tapani Utriainen550e3752013-12-04 09:27:33 +010021
22#define CONFIG_OMAP_GPIO
23#define CONFIG_OMAP_COMMON
Stefan Roese188948e2014-07-09 17:18:11 +020024#define CONFIG_SYS_GENERIC_BOARD
Tapani Utriainen550e3752013-12-04 09:27:33 +010025
26#define MACH_TYPE_OMAP3_TAO3530 2836
27
28#define CONFIG_SDRC /* Has an SDRC controller */
29
30#include <asm/arch/cpu.h> /* get chip and board defs */
31#include <asm/arch/omap3.h>
32
33/*
34 * Display CPU and Board information
35 */
36#define CONFIG_DISPLAY_CPUINFO
37#define CONFIG_DISPLAY_BOARDINFO
38
39/* Clock Defines */
40#define V_OSCK 26000000 /* Clock output from T2 */
41#define V_SCLK (V_OSCK >> 1)
42
43#define CONFIG_MISC_INIT_R
44
45#define CONFIG_OF_LIBFDT
46
47#define CONFIG_CMDLINE_TAG
48#define CONFIG_SETUP_MEMORY_TAGS
49#define CONFIG_INITRD_TAG
50#define CONFIG_REVISION_TAG
51
52/*
53 * Size of malloc() pool
54 */
55#define CONFIG_SYS_MALLOC_LEN (4 << 20)
56#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
57
58/*
59 * Hardware drivers
60 */
61
62/*
63 * NS16550 Configuration
64 */
65#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
66
67#define CONFIG_SYS_NS16550
68#define CONFIG_SYS_NS16550_SERIAL
69#define CONFIG_SYS_NS16550_REG_SIZE (-4)
70#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
71
72/*
73 * select serial console configuration
74 */
75#define CONFIG_CONS_INDEX 3
76#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
77
78/* allow to overwrite serial and ethaddr */
79#define CONFIG_ENV_OVERWRITE
80#define CONFIG_BAUDRATE 115200
81#define CONFIG_GENERIC_MMC
82#define CONFIG_MMC
83#define CONFIG_OMAP_HSMMC
84#define CONFIG_DOS_PARTITION
85
Stefan Roese36481de2014-02-14 09:47:17 +010086/* GPIO banks */
87#define CONFIG_OMAP3_GPIO_2 /* GPIO32 ..63 is in GPIO bank 2 */
88#define CONFIG_OMAP3_GPIO_3 /* GPIO64 ..95 is in GPIO bank 3 */
89#define CONFIG_OMAP3_GPIO_4 /* GPIO96 ..127 is in GPIO bank 4 */
90#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
91#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
92
Tapani Utriainen550e3752013-12-04 09:27:33 +010093/* commands to include */
94#include <config_cmd_default.h>
95
96#define CONFIG_CMD_CACHE
97#define CONFIG_CMD_EXT2 /* EXT2 Support */
98#define CONFIG_CMD_FAT /* FAT support */
99#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
100#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
101#define MTDIDS_DEFAULT "nand0=nand"
102#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
103 "1920k(u-boot),128k(u-boot-env),"\
104 "4m(kernel),-(fs)"
105
106#define CONFIG_CMD_I2C /* I2C serial bus support */
107#define CONFIG_CMD_MMC /* MMC support */
108#define CONFIG_CMD_NAND /* NAND support */
109#define CONFIG_CMD_DHCP
110#define CONFIG_CMD_PING
111
112#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
113#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
114#undef CONFIG_CMD_IMI /* iminfo */
115#undef CONFIG_CMD_IMLS /* List all found images */
116
117#define CONFIG_SYS_NO_FLASH
118#define CONFIG_SYS_I2C
119#define CONFIG_SYS_I2C_OMAP34XX
120#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
121#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
122#define CONFIG_I2C_MULTI_BUS
123
124/*
125 * TWL4030
126 */
127#define CONFIG_TWL4030_POWER
128#define CONFIG_TWL4030_LED
129
130/*
131 * Board NAND Info.
132 */
133#define CONFIG_SYS_NAND_QUIET_TEST
134#define CONFIG_NAND_OMAP_GPMC
135#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
136 /* to access nand */
137#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
138 /* to access nand at */
139 /* CS0 */
Tapani Utriainen550e3752013-12-04 09:27:33 +0100140
141#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
142 /* devices */
pekon guptab80a6602014-05-06 00:46:19 +0530143#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
Tapani Utriainen550e3752013-12-04 09:27:33 +0100144/* Environment information */
145#define CONFIG_BOOTDELAY 3
146
147#define CONFIG_EXTRA_ENV_SETTINGS \
148 "loadaddr=0x82000000\0" \
149 "console=ttyO2,115200n8\0" \
150 "mpurate=600\0" \
151 "dvi_mode=omapfb.mode=dvi:1280x720-24@60\0" \
152 "tv_mode=omapfb.mode=tv:ntsc\0" \
153 "video_mode=omapdss.def_disp=lcd vram=6M omapfb.vram=0:2M,1:2M,2:2M\0" \
154 "lcd_mode=omapfb.mode=lcd:800x480@60 \0" \
155 "extra_options= \0" \
Tapani Utriainen550e3752013-12-04 09:27:33 +0100156 "mmcdev=0\0" \
157 "mmcroot=/dev/mmcblk0p2 rw\0" \
158 "mmcrootfstype=ext3 rootwait\0" \
159 "nandroot=ubi0:rootfs ubi.mtd=4\0" \
160 "nandrootfstype=ubifs\0" \
161 "mmcargs=setenv bootargs console=${console} " \
Tapani Utriainen550e3752013-12-04 09:27:33 +0100162 "mpurate=${mpurate} " \
163 "${video_mode} " \
164 "root=${mmcroot} " \
165 "rootfstype=${mmcrootfstype} " \
166 "${extra_options}\0" \
167 "nandargs=setenv bootargs console=${console} " \
Tapani Utriainen550e3752013-12-04 09:27:33 +0100168 "mpurate=${mpurate} " \
169 "${video_mode} " \
170 "${network_setting} " \
171 "root=${nandroot} " \
172 "rootfstype=${nandrootfstype} "\
173 "${extra_options}\0" \
174 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
175 "bootscript=echo Running bootscript from mmc ...; " \
176 "source ${loadaddr}\0" \
177 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
178 "mmcboot=echo Booting from mmc ...; " \
179 "run mmcargs; " \
180 "bootm ${loadaddr}\0" \
181 "nandboot=echo Booting from nand ...; " \
182 "run nandargs; " \
183 "nand read ${loadaddr} 280000 400000; " \
184 "bootm ${loadaddr}\0" \
185
186#define CONFIG_BOOTCOMMAND \
187 "if mmc rescan ${mmcdev}; then " \
188 "if run loadbootscript; then " \
189 "run bootscript; " \
190 "else " \
191 "if run loaduimage; then " \
192 "run mmcboot; " \
193 "else run nandboot; " \
194 "fi; " \
195 "fi; " \
196 "else run nandboot; fi"
197
198/*
199 * Miscellaneous configurable options
200 */
201#define CONFIG_SYS_LONGHELP /* undef to save memory */
202#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
203#define CONFIG_SYS_PROMPT "TAO-3530 # "
204#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
205
206/* turn on command-line edit/hist/auto */
207#define CONFIG_CMDLINE_EDITING
208#define CONFIG_COMMAND_HISTORY
209#define CONFIG_AUTO_COMPLETE
210
211/* Print Buffer Size */
212#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
213 sizeof(CONFIG_SYS_PROMPT) + 16)
214#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
215/* Boot Argument Buffer Size */
216#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
217
218#define CONFIG_SYS_ALT_MEMTEST 1
219#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest */
220 /* defaults */
221#define CONFIG_SYS_MEMTEST_END (0x83FFFFFF) /* 64MB */
222#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */
223
224#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
225 /* load address */
226#define CONFIG_SYS_TEXT_BASE 0x80008000
227
228/*
229 * OMAP3 has 12 GP timers, they can be driven by the system clock
230 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
231 * This rate is divided by a local divisor.
232 */
233#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
234#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
235
236/*
237 * Stack sizes
238 *
239 * The stack sizes are set up in start.S using the settings below
240 */
241#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
242
243/*
244 * Physical Memory Map
245 */
246#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
247#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
248#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
249#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
250
251/*
252 * FLASH and environment organization
253 */
254
255/* **** PISMO SUPPORT *** */
Tapani Utriainen550e3752013-12-04 09:27:33 +0100256#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
pekon gupta222a3112014-07-18 17:59:41 +0530257#define CONFIG_SYS_FLASH_BASE NAND_BASE
Tapani Utriainen550e3752013-12-04 09:27:33 +0100258
259/* Monitor at start of flash */
260#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
261#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
262
263#define CONFIG_ENV_IS_IN_NAND 1
264#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
265#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
266
267#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10)
268#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
269#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
270
271#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
272#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
273#define CONFIG_SYS_INIT_RAM_SIZE 0x800
274#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
275 CONFIG_SYS_INIT_RAM_SIZE - \
276 GENERATED_GBL_DATA_SIZE)
277
278#define CONFIG_OMAP3_SPI
279
280/*
281 * USB
282 *
283 * Currently only EHCI is enabled, the MUSB OTG controller
284 * is not enabled.
285 */
286
287/* USB EHCI */
288#define CONFIG_CMD_USB
289#define CONFIG_USB_EHCI
290#define CONFIG_USB_EHCI_OMAP
291#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 162
292
293#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
294#define CONFIG_USB_HOST_ETHER
295#define CONFIG_USB_ETHER_SMSC95XX
296
297#define CONFIG_USB_ETHER
298#define CONFIG_USB_ETHER_RNDIS
299#define CONFIG_USB_STORAGE
300#define CONGIG_CMD_STORAGE
301
Stefan Roesea9f52492013-12-04 09:27:34 +0100302/* Defines for SPL */
Stefan Roesea9f52492013-12-04 09:27:34 +0100303#define CONFIG_SPL_FRAMEWORK
304#define CONFIG_SPL_NAND_SIMPLE
305
306#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
307#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
308#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
309#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
310
311#define CONFIG_SPL_BOARD_INIT
312#define CONFIG_SPL_LIBCOMMON_SUPPORT
313#define CONFIG_SPL_LIBDISK_SUPPORT
314#define CONFIG_SPL_I2C_SUPPORT
315#define CONFIG_SPL_LIBGENERIC_SUPPORT
316#define CONFIG_SPL_MMC_SUPPORT
317#define CONFIG_SPL_FAT_SUPPORT
318#define CONFIG_SPL_SERIAL_SUPPORT
319#define CONFIG_SPL_NAND_SUPPORT
320#define CONFIG_SPL_NAND_BASE
321#define CONFIG_SPL_NAND_DRIVERS
322#define CONFIG_SPL_NAND_ECC
323#define CONFIG_SPL_GPIO_SUPPORT
324#define CONFIG_SPL_POWER_SUPPORT
325#define CONFIG_SPL_OMAP3_ID_NAND
326#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
327
328/* NAND boot config */
329#define CONFIG_SYS_NAND_5_ADDR_CYCLE
330#define CONFIG_SYS_NAND_PAGE_COUNT 64
331#define CONFIG_SYS_NAND_PAGE_SIZE 2048
332#define CONFIG_SYS_NAND_OOBSIZE 64
333#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
334#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
335/*
336 * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
337 * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
338 */
339#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
340 10, 11, 12, 13 }
341#define CONFIG_SYS_NAND_ECCSIZE 512
342#define CONFIG_SYS_NAND_ECCBYTES 3
343#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
344
345#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
346#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
347
348#define CONFIG_SPL_TEXT_BASE 0x40200800
349#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
350#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
351
352/*
353 * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
354 * older x-loader implementations. And move the BSS area so that it
355 * doesn't overlap with TEXT_BASE.
356 */
357#define CONFIG_SYS_TEXT_BASE 0x80008000
358#define CONFIG_SPL_BSS_START_ADDR 0x80100000
359#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
360
361#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
362#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
363
Tapani Utriainen550e3752013-12-04 09:27:33 +0100364#endif /* __CONFIG_H */