blob: 71373e98f9585ab4b915b6ee0b1554ec4e8d9587 [file] [log] [blame]
Stefan Roese995b72d2012-05-30 22:59:08 +00001/*
2 * (C) Copyright 2009
3 * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
4 *
5 * Copyright (C) 2012 Stefan Roese <sr@denx.de>
6 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02007 * SPDX-License-Identifier: GPL-2.0+
Stefan Roese995b72d2012-05-30 22:59:08 +00008 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
13/*
14 * High Level Configuration Options
15 * (easy to change)
16 */
17#define CONFIG_SPEAR600 /* SPEAr600 SoC */
18#define CONFIG_X600 /* on X600 board */
19
20#include <asm/arch/hardware.h>
21
22/* Timer, HZ specific defines */
Stefan Roese995b72d2012-05-30 22:59:08 +000023#define CONFIG_SYS_HZ_CLOCK 8300000
24
25#define CONFIG_SYS_TEXT_BASE 0x00800040
26#define CONFIG_SYS_FLASH_BASE 0xf8000000
27/* Reserve 8KiB for SPL */
28#define CONFIG_SPL_PAD_TO 8192 /* decimal for 'dd' */
29#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
30#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \
31 CONFIG_SYS_SPL_LEN)
32#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
33#define CONFIG_SYS_MONITOR_LEN 0x60000
34
35#define CONFIG_ENV_IS_IN_FLASH
36
37/* Serial Configuration (PL011) */
38#define CONFIG_SYS_SERIAL0 0xD0000000
39#define CONFIG_SYS_SERIAL1 0xD0080000
40#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, \
41 (void *)CONFIG_SYS_SERIAL1 }
42#define CONFIG_PL011_SERIAL
43#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
44#define CONFIG_CONS_INDEX 0
45#define CONFIG_BAUDRATE 115200
46#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
47 57600, 115200 }
48#define CONFIG_SYS_LOADS_BAUD_CHANGE
49
50/* NOR FLASH config options */
51#define CONFIG_ST_SMI
52#define CONFIG_SYS_MAX_FLASH_BANKS 1
53#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000
54#define CONFIG_SYS_FLASH_ADDR_BASE { CONFIG_SYS_FLASH_BASE }
55#define CONFIG_SYS_MAX_FLASH_SECT 128
56#define CONFIG_SYS_FLASH_EMPTY_INFO
57#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
58#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
59
60/* NAND FLASH config options */
61#define CONFIG_NAND_FSMC
62#define CONFIG_SYS_NAND_SELF_INIT
63#define CONFIG_SYS_MAX_NAND_DEVICE 1
64#define CONFIG_SYS_NAND_BASE CONFIG_FSMC_NAND_BASE
65#define CONFIG_MTD_ECC_SOFT
66#define CONFIG_SYS_FSMC_NAND_8BIT
67#define CONFIG_SYS_NAND_ONFI_DETECTION
68
69/* UBI/UBI config options */
70#define CONFIG_MTD_DEVICE
71#define CONFIG_MTD_PARTITIONS
72#define CONFIG_RBTREE
73
74/* Ethernet config options */
75#define CONFIG_MII
76#define CONFIG_DESIGNWARE_ETH
Stefan Roese995b72d2012-05-30 22:59:08 +000077#define CONFIG_NET_MULTI
Tom Rini1a78d282014-02-07 08:52:06 -050078#define CONFIG_PHYLIB
Stefan Roese995b72d2012-05-30 22:59:08 +000079#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
Stefan Roese995b72d2012-05-30 22:59:08 +000080#define CONFIG_PHY_ADDR 0 /* PHY address */
81#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
82
83#define CONFIG_SPEAR_GPIO
84
85/* I2C config options */
86#define CONFIG_HARD_I2C
87#define CONFIG_DW_I2C
Alexey Brodkinf93f5892014-02-10 12:20:11 +040088#define CONFIG_SYS_I2C_BASE 0xD0200000
Stefan Roese995b72d2012-05-30 22:59:08 +000089#define CONFIG_SYS_I2C_SPEED 400000
90#define CONFIG_SYS_I2C_SLAVE 0x02
91#define CONFIG_I2C_CHIPADDRESS 0x50
92
93#define CONFIG_RTC_M41T62 1
94#define CONFIG_SYS_I2C_RTC_ADDR 0x68
95
96/* FPGA config options */
97#define CONFIG_FPGA
98#define CONFIG_FPGA_XILINX
99#define CONFIG_FPGA_SPARTAN3
100#define CONFIG_FPGA_COUNT 1
101
102/*
103 * Command support defines
104 */
105#define CONFIG_CMD_CACHE
106#define CONFIG_CMD_DATE
107#define CONFIG_CMD_DHCP
108#define CONFIG_CMD_ENV
109#define CONFIG_CMD_FPGA
Siva Durga Prasad Paladugu64e809a2014-03-14 16:35:38 +0530110#define CONFIG_CMD_FPGA_LOADMK
Stefan Roese995b72d2012-05-30 22:59:08 +0000111#define CONFIG_CMD_GPIO
112#define CONFIG_CMD_I2C
113#define CONFIG_CMD_MEMORY
114#define CONFIG_CMD_MII
115#define CONFIG_CMD_MTDPARTS
116#define CONFIG_CMD_NAND
117#define CONFIG_CMD_NET
118#define CONFIG_CMD_PING
119#define CONFIG_CMD_RUN
120#define CONFIG_CMD_SAVES
121#define CONFIG_CMD_UBI
122#define CONFIG_CMD_UBIFS
123#define CONFIG_LZO
124
125/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
126#include <config_cmd_default.h>
127
128#define CONFIG_BOOTDELAY 3
129
130#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
131#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
132
133/*
134 * U-Boot Environment placing definitions.
135 */
136#define CONFIG_ENV_SECT_SIZE 0x00010000
137#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
138 CONFIG_SYS_MONITOR_LEN)
139#define CONFIG_ENV_SIZE 0x02000
140#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \
141 CONFIG_ENV_SECT_SIZE)
142#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
143
144/* Miscellaneous configurable options */
145#define CONFIG_ARCH_CPU_INIT
146#define CONFIG_DISPLAY_CPUINFO
147#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
148#define CONFIG_CMDLINE_TAG
149#define CONFIG_OF_LIBFDT /* enable passing of devicetree */
150#define CONFIG_SETUP_MEMORY_TAGS
151#define CONFIG_MISC_INIT_R
152#define CONFIG_BOARD_LATE_INIT
153#define CONFIG_LOOPW /* enable loopw command */
154#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
155#define CONFIG_ZERO_BOOTDELAY_CHECK
156#define CONFIG_AUTOBOOT_KEYED
157#define CONFIG_AUTOBOOT_STOP_STR " "
158#define CONFIG_AUTOBOOT_PROMPT \
159 "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
160
161#define CONFIG_SYS_MEMTEST_START 0x00800000
162#define CONFIG_SYS_MEMTEST_END 0x04000000
163#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
164#define CONFIG_IDENT_STRING "-SPEAr"
165#define CONFIG_SYS_LONGHELP
166#define CONFIG_SYS_PROMPT "X600> "
167#define CONFIG_CMDLINE_EDITING
168#define CONFIG_SYS_CBSIZE 256
169#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
170 sizeof(CONFIG_SYS_PROMPT) + 16)
171#define CONFIG_SYS_MAXARGS 16
172#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
173#define CONFIG_SYS_LOAD_ADDR 0x00800000
174#define CONFIG_SYS_CONSOLE_INFO_QUIET
Stefan Roese995b72d2012-05-30 22:59:08 +0000175
176/* Use last 2 lwords in internal SRAM for bootcounter */
177#define CONFIG_BOOTCOUNT_LIMIT
178#define CONFIG_SYS_BOOTCOUNT_ADDR 0xd2801ff8
179
180#define CONFIG_HOSTNAME x600
181#define CONFIG_UBI_PART ubi0
182#define CONFIG_UBIFS_VOLUME rootfs
183
184#define xstr(s) str(s)
185#define str(s) #s
186
187#define MTDIDS_DEFAULT "nand0=nand"
188#define MTDPARTS_DEFAULT "mtdparts=nand:64M(ubi0),64M(ubi1)"
189
190#define CONFIG_EXTRA_ENV_SETTINGS \
191 "u-boot_addr=1000000\0" \
192 "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.spr\0" \
193 "load=tftp ${u-boot_addr} ${u-boot}\0" \
194 "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};"\
195 "erase " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
196 "cp.b ${u-boot_addr} " xstr(CONFIG_SYS_MONITOR_BASE) \
197 " ${filesize};" \
198 "protect on " xstr(CONFIG_SYS_MONITOR_BASE) \
199 " +${filesize}\0" \
200 "upd=run load update\0" \
201 "ubifs=" xstr(CONFIG_HOSTNAME) "/ubifs.img\0" \
202 "part=" xstr(CONFIG_UBI_PART) "\0" \
203 "vol=" xstr(CONFIG_UBIFS_VOLUME) "\0" \
204 "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
205 "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
206 " ${filesize}\0" \
207 "upd_ubifs=run load_ubifs update_ubifs\0" \
208 "init_ubifs=nand erase.part ubi0;ubi part ${part};" \
209 "ubi create ${vol} 4000000\0" \
210 "netdev=eth0\0" \
211 "rootpath=/opt/eldk-4.2/arm\0" \
212 "nfsargs=setenv bootargs root=/dev/nfs rw " \
213 "nfsroot=${serverip}:${rootpath}\0" \
214 "ramargs=setenv bootargs root=/dev/ram rw\0" \
215 "boot_part=0\0" \
216 "altbootcmd=if test $boot_part -eq 0;then " \
217 "echo Switching to partition 1!;" \
218 "setenv boot_part 1;" \
219 "else; " \
220 "echo Switching to partition 0!;" \
221 "setenv boot_part 0;" \
222 "fi;" \
223 "saveenv;boot\0" \
224 "ubifsargs=set bootargs ubi.mtd=ubi${boot_part} " \
225 "root=ubi0:rootfs rootfstype=ubifs\0" \
226 "kernel=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
227 "kernel_fs=/boot/uImage \0" \
228 "kernel_addr=1000000\0" \
229 "dtb=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0" \
230 "dtb_fs=/boot/" xstr(CONFIG_HOSTNAME) ".dtb\0" \
231 "dtb_addr=1800000\0" \
232 "load_kernel=tftp ${kernel_addr} ${kernel}\0" \
233 "load_dtb=tftp ${dtb_addr} ${dtb}\0" \
234 "addip=setenv bootargs ${bootargs} " \
235 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
236 ":${hostname}:${netdev}:off panic=1\0" \
237 "addcon=setenv bootargs ${bootargs} console=ttyAMA0," \
238 "${baudrate}\0" \
239 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
240 "net_nfs=run load_dtb load_kernel; " \
241 "run nfsargs addip addcon addmtd addmisc;" \
242 "bootm ${kernel_addr} - ${dtb_addr}\0" \
243 "mtdids=" MTDIDS_DEFAULT "\0" \
244 "mtdparts=" MTDPARTS_DEFAULT "\0" \
245 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
246 " addcon addmisc addmtd;" \
247 "bootm ${kernel_addr} - ${dtb_addr}\0" \
Joe Hershberger949a7712012-11-01 16:54:18 +0000248 "ubifs_mount=ubi part ubi${boot_part};ubifsmount ubi:rootfs\0" \
Stefan Roese995b72d2012-05-30 22:59:08 +0000249 "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
250 "ubifsload ${dtb_addr} ${dtb_fs};\0" \
251 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
252 "addmtd addmisc;bootm ${kernel_addr} - ${dtb_addr}\0" \
253 "bootcmd=run nand_ubifs\0" \
254 "\0"
255
256/* Stack sizes */
257#define CONFIG_STACKSIZE (512 * 1024)
258
259/* Physical Memory Map */
260#define CONFIG_NR_DRAM_BANKS 1
261#define PHYS_SDRAM_1 0x00000000
262#define PHYS_SDRAM_1_MAXSIZE 0x40000000
263
264#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
265#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000
266#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
267
268#define CONFIG_SYS_INIT_SP_OFFSET \
269 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
270
271#define CONFIG_SYS_INIT_SP_ADDR \
272 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
273
274/*
275 * SPL related defines
276 */
Stefan Roese995b72d2012-05-30 22:59:08 +0000277#define CONFIG_SPL_TEXT_BASE 0xd2800b00
278#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
279#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"
280
281#define CONFIG_SPL_SERIAL_SUPPORT
282#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */
283#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */
284#define CONFIG_SPL_NO_PRINTF
285
286/*
287 * Please select/define only one of the following
288 * Each definition corresponds to a supported DDR chip.
289 * DDR configuration is based on the following selection
290 */
291#define CONFIG_DDR_MT47H64M16 1
292#define CONFIG_DDR_MT47H32M16 0
293#define CONFIG_DDR_MT47H128M8 0
294
295/*
296 * Synchronous/Asynchronous operation of DDR
297 *
298 * Select CONFIG_DDR_2HCLK for DDR clk = 333MHz, synchronous operation
299 * Select CONFIG_DDR_HCLK for DDR clk = 166MHz, synchronous operation
300 * Select CONFIG_DDR_PLL2 for DDR clk = PLL2, asynchronous operation
301 */
302#define CONFIG_DDR_2HCLK 1
303#define CONFIG_DDR_HCLK 0
304#define CONFIG_DDR_PLL2 0
305
306/*
307 * xxx_BOOT_SUPPORTED macro defines whether a booting type is supported
308 * or not. Modify/Add to only these macros to define new boot types
309 */
310#define USB_BOOT_SUPPORTED 0
311#define PCIE_BOOT_SUPPORTED 0
312#define SNOR_BOOT_SUPPORTED 1
313#define NAND_BOOT_SUPPORTED 1
314#define PNOR_BOOT_SUPPORTED 0
315#define TFTP_BOOT_SUPPORTED 0
316#define UART_BOOT_SUPPORTED 0
317#define SPI_BOOT_SUPPORTED 0
318#define I2C_BOOT_SUPPORTED 0
319#define MMC_BOOT_SUPPORTED 0
320
321#endif /* __CONFIG_H */