Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Andreas Bießmann | 7b1a411 | 2014-05-19 14:23:39 +0200 | [diff] [blame] | 2 | /* |
| 3 | * (C) Copyright 2014 |
Andreas Bießmann | 09c2b8f | 2016-05-01 03:46:16 +0200 | [diff] [blame] | 4 | * Andreas Bießmann <andreas@biessmann.org> |
Andreas Bießmann | 7b1a411 | 2014-05-19 14:23:39 +0200 | [diff] [blame] | 5 | */ |
| 6 | |
| 7 | #include "imagetool.h" |
| 8 | #include "mkimage.h" |
| 9 | |
| 10 | #include <image.h> |
| 11 | |
| 12 | #define pr_err(fmt, args...) fprintf(stderr, "atmelimage Error: " fmt, ##args) |
| 13 | |
| 14 | static int atmel_check_image_type(uint8_t type) |
| 15 | { |
| 16 | if (type == IH_TYPE_ATMELIMAGE) |
| 17 | return EXIT_SUCCESS; |
| 18 | else |
| 19 | return EXIT_FAILURE; |
| 20 | } |
| 21 | |
| 22 | static uint32_t nand_pmecc_header[52]; |
| 23 | |
| 24 | /* |
| 25 | * A helper struct for parsing the mkimage -n parameter |
| 26 | * |
| 27 | * Keep in same order as the configs array! |
| 28 | */ |
| 29 | static struct pmecc_config { |
| 30 | int use_pmecc; |
| 31 | int sector_per_page; |
| 32 | int spare_size; |
| 33 | int ecc_bits; |
| 34 | int sector_size; |
| 35 | int ecc_offset; |
| 36 | } pmecc; |
| 37 | |
| 38 | /* |
| 39 | * Strings used for configure the PMECC header via -n mkimage switch |
| 40 | * |
| 41 | * We estimate a coma separated list of key=value pairs. The mkimage -n |
| 42 | * parameter argument should not contain any whitespace. |
| 43 | * |
| 44 | * Keep in same order as struct pmecc_config! |
| 45 | */ |
| 46 | static const char * const configs[] = { |
| 47 | "usePmecc", |
| 48 | "sectorPerPage", |
| 49 | "spareSize", |
| 50 | "eccBits", |
| 51 | "sectorSize", |
| 52 | "eccOffset" |
| 53 | }; |
| 54 | |
| 55 | static int atmel_find_pmecc_parameter_in_token(const char *token) |
| 56 | { |
| 57 | size_t pos; |
| 58 | char *param; |
| 59 | |
| 60 | debug("token: '%s'\n", token); |
| 61 | |
| 62 | for (pos = 0; pos < ARRAY_SIZE(configs); pos++) { |
| 63 | if (strncmp(token, configs[pos], strlen(configs[pos])) == 0) { |
| 64 | param = strstr(token, "="); |
| 65 | if (!param) |
| 66 | goto err; |
| 67 | |
| 68 | param++; |
| 69 | debug("\t%s parameter: '%s'\n", configs[pos], param); |
| 70 | |
| 71 | switch (pos) { |
| 72 | case 0: |
| 73 | pmecc.use_pmecc = strtol(param, NULL, 10); |
| 74 | return EXIT_SUCCESS; |
| 75 | case 1: |
| 76 | pmecc.sector_per_page = strtol(param, NULL, 10); |
| 77 | return EXIT_SUCCESS; |
| 78 | case 2: |
| 79 | pmecc.spare_size = strtol(param, NULL, 10); |
| 80 | return EXIT_SUCCESS; |
| 81 | case 3: |
| 82 | pmecc.ecc_bits = strtol(param, NULL, 10); |
| 83 | return EXIT_SUCCESS; |
| 84 | case 4: |
| 85 | pmecc.sector_size = strtol(param, NULL, 10); |
| 86 | return EXIT_SUCCESS; |
| 87 | case 5: |
| 88 | pmecc.ecc_offset = strtol(param, NULL, 10); |
| 89 | return EXIT_SUCCESS; |
| 90 | } |
| 91 | } |
| 92 | } |
| 93 | |
| 94 | err: |
| 95 | pr_err("Could not find parameter in token '%s'\n", token); |
| 96 | return EXIT_FAILURE; |
| 97 | } |
| 98 | |
| 99 | static int atmel_parse_pmecc_params(char *txt) |
| 100 | { |
| 101 | char *token; |
| 102 | |
| 103 | token = strtok(txt, ","); |
| 104 | while (token != NULL) { |
| 105 | if (atmel_find_pmecc_parameter_in_token(token)) |
| 106 | return EXIT_FAILURE; |
| 107 | |
| 108 | token = strtok(NULL, ","); |
| 109 | } |
| 110 | |
| 111 | return EXIT_SUCCESS; |
| 112 | } |
| 113 | |
| 114 | static int atmel_verify_header(unsigned char *ptr, int image_size, |
| 115 | struct image_tool_params *params) |
| 116 | { |
| 117 | uint32_t *ints = (uint32_t *)ptr; |
| 118 | size_t pos; |
| 119 | size_t size = image_size; |
| 120 | |
| 121 | /* check if we have an PMECC header attached */ |
| 122 | for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++) |
| 123 | if (ints[pos] >> 28 != 0xC) |
| 124 | break; |
| 125 | |
| 126 | if (pos == ARRAY_SIZE(nand_pmecc_header)) { |
| 127 | ints += ARRAY_SIZE(nand_pmecc_header); |
| 128 | size -= sizeof(nand_pmecc_header); |
| 129 | } |
| 130 | |
| 131 | /* check the seven interrupt vectors of binary */ |
| 132 | for (pos = 0; pos < 7; pos++) { |
Tom Rini | a679cc0 | 2015-08-26 15:18:30 -0400 | [diff] [blame] | 133 | debug("atmelimage: interrupt vector #%zu is 0x%08X\n", pos+1, |
Andreas Bießmann | 7b1a411 | 2014-05-19 14:23:39 +0200 | [diff] [blame] | 134 | ints[pos]); |
| 135 | /* |
| 136 | * all vectors except the 6'th one must contain valid |
| 137 | * LDR or B Opcode |
| 138 | */ |
| 139 | if (pos == 5) |
| 140 | /* 6'th vector has image size set, check later */ |
| 141 | continue; |
| 142 | if ((ints[pos] & 0xff000000) == 0xea000000) |
| 143 | /* valid B Opcode */ |
| 144 | continue; |
| 145 | if ((ints[pos] & 0xfffff000) == 0xe59ff000) |
| 146 | /* valid LDR (I=0, P=1, U=1, B=0, W=0, L=1) */ |
| 147 | continue; |
| 148 | /* ouch, one of the checks has missed ... */ |
| 149 | return 1; |
| 150 | } |
| 151 | |
| 152 | return ints[5] != cpu_to_le32(size); |
| 153 | } |
| 154 | |
| 155 | static void atmel_print_pmecc_header(const uint32_t word) |
| 156 | { |
| 157 | int val; |
| 158 | |
| 159 | printf("\t\tPMECC header\n"); |
| 160 | |
| 161 | printf("\t\t====================\n"); |
| 162 | |
| 163 | val = (word >> 18) & 0x1ff; |
| 164 | printf("\t\teccOffset: %9i\n", val); |
| 165 | |
| 166 | val = (((word >> 16) & 0x3) == 0) ? 512 : 1024; |
| 167 | printf("\t\tsectorSize: %8i\n", val); |
| 168 | |
| 169 | if (((word >> 13) & 0x7) <= 2) |
| 170 | val = (2 << ((word >> 13) & 0x7)); |
| 171 | else |
| 172 | val = (12 << (((word >> 13) & 0x7) - 3)); |
| 173 | printf("\t\teccBitReq: %9i\n", val); |
| 174 | |
| 175 | val = (word >> 4) & 0x1ff; |
| 176 | printf("\t\tspareSize: %9i\n", val); |
| 177 | |
| 178 | val = (1 << ((word >> 1) & 0x3)); |
| 179 | printf("\t\tnbSectorPerPage: %3i\n", val); |
| 180 | |
| 181 | printf("\t\tusePmecc: %10i\n", word & 0x1); |
| 182 | printf("\t\t====================\n"); |
| 183 | } |
| 184 | |
| 185 | static void atmel_print_header(const void *ptr) |
| 186 | { |
| 187 | uint32_t *ints = (uint32_t *)ptr; |
| 188 | size_t pos; |
| 189 | |
| 190 | /* check if we have an PMECC header attached */ |
| 191 | for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++) |
| 192 | if (ints[pos] >> 28 != 0xC) |
| 193 | break; |
| 194 | |
| 195 | if (pos == ARRAY_SIZE(nand_pmecc_header)) { |
| 196 | printf("Image Type:\tATMEL ROM-Boot Image with PMECC Header\n"); |
| 197 | atmel_print_pmecc_header(ints[0]); |
| 198 | pos += 5; |
| 199 | } else { |
| 200 | printf("Image Type:\tATMEL ROM-Boot Image without PMECC Header\n"); |
| 201 | pos = 5; |
| 202 | } |
| 203 | printf("\t\t6'th vector has %u set\n", le32_to_cpu(ints[pos])); |
| 204 | } |
| 205 | |
| 206 | static void atmel_set_header(void *ptr, struct stat *sbuf, int ifd, |
| 207 | struct image_tool_params *params) |
| 208 | { |
| 209 | /* just save the image size into 6'th interrupt vector */ |
| 210 | uint32_t *ints = (uint32_t *)ptr; |
| 211 | size_t cnt; |
| 212 | size_t pos = 5; |
| 213 | size_t size = sbuf->st_size; |
| 214 | |
| 215 | for (cnt = 0; cnt < ARRAY_SIZE(nand_pmecc_header); cnt++) |
| 216 | if (ints[cnt] >> 28 != 0xC) |
| 217 | break; |
| 218 | |
| 219 | if (cnt == ARRAY_SIZE(nand_pmecc_header)) { |
| 220 | pos += ARRAY_SIZE(nand_pmecc_header); |
| 221 | size -= sizeof(nand_pmecc_header); |
| 222 | } |
| 223 | |
| 224 | ints[pos] = cpu_to_le32(size); |
| 225 | } |
| 226 | |
| 227 | static int atmel_check_params(struct image_tool_params *params) |
| 228 | { |
| 229 | if (strlen(params->imagename) > 0) |
| 230 | if (atmel_parse_pmecc_params(params->imagename)) |
| 231 | return EXIT_FAILURE; |
| 232 | |
| 233 | return !(!params->eflag && |
| 234 | !params->fflag && |
| 235 | !params->xflag && |
| 236 | ((params->dflag && !params->lflag) || |
| 237 | (params->lflag && !params->dflag))); |
| 238 | } |
| 239 | |
| 240 | static int atmel_vrec_header(struct image_tool_params *params, |
| 241 | struct image_type_params *tparams) |
| 242 | { |
| 243 | uint32_t tmp; |
| 244 | size_t pos; |
| 245 | |
| 246 | if (strlen(params->imagename) == 0) |
| 247 | return EXIT_SUCCESS; |
| 248 | |
| 249 | tmp = 0xC << 28; |
| 250 | |
| 251 | tmp |= (pmecc.ecc_offset & 0x1ff) << 18; |
| 252 | |
| 253 | switch (pmecc.sector_size) { |
| 254 | case 512: |
| 255 | tmp |= 0 << 16; |
| 256 | break; |
| 257 | case 1024: |
| 258 | tmp |= 1 << 16; |
| 259 | break; |
| 260 | |
| 261 | default: |
| 262 | pr_err("Wrong sectorSize (%i) for PMECC header\n", |
| 263 | pmecc.sector_size); |
| 264 | return EXIT_FAILURE; |
| 265 | } |
| 266 | |
| 267 | switch (pmecc.ecc_bits) { |
| 268 | case 2: |
| 269 | tmp |= 0 << 13; |
| 270 | break; |
| 271 | case 4: |
| 272 | tmp |= 1 << 13; |
| 273 | break; |
| 274 | case 8: |
| 275 | tmp |= 2 << 13; |
| 276 | break; |
| 277 | case 12: |
| 278 | tmp |= 3 << 13; |
| 279 | break; |
| 280 | case 24: |
| 281 | tmp |= 4 << 13; |
| 282 | break; |
| 283 | |
| 284 | default: |
| 285 | pr_err("Wrong eccBits (%i) for PMECC header\n", |
| 286 | pmecc.ecc_bits); |
| 287 | return EXIT_FAILURE; |
| 288 | } |
| 289 | |
| 290 | tmp |= (pmecc.spare_size & 0x1ff) << 4; |
| 291 | |
| 292 | switch (pmecc.sector_per_page) { |
| 293 | case 1: |
| 294 | tmp |= 0 << 1; |
| 295 | break; |
| 296 | case 2: |
| 297 | tmp |= 1 << 1; |
| 298 | break; |
| 299 | case 4: |
| 300 | tmp |= 2 << 1; |
| 301 | break; |
| 302 | case 8: |
| 303 | tmp |= 3 << 1; |
| 304 | break; |
| 305 | |
| 306 | default: |
| 307 | pr_err("Wrong sectorPerPage (%i) for PMECC header\n", |
| 308 | pmecc.sector_per_page); |
| 309 | return EXIT_FAILURE; |
| 310 | } |
| 311 | |
| 312 | if (pmecc.use_pmecc) |
| 313 | tmp |= 1; |
| 314 | |
| 315 | for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++) |
| 316 | nand_pmecc_header[pos] = tmp; |
| 317 | |
| 318 | debug("PMECC header filled 52 times with 0x%08X\n", tmp); |
| 319 | |
| 320 | tparams->header_size = sizeof(nand_pmecc_header); |
| 321 | tparams->hdr = nand_pmecc_header; |
| 322 | |
| 323 | return EXIT_SUCCESS; |
| 324 | } |
| 325 | |
Guilherme Maciel Ferreira | a93648d | 2015-01-15 02:48:07 -0200 | [diff] [blame] | 326 | U_BOOT_IMAGE_TYPE( |
| 327 | atmelimage, |
| 328 | "ATMEL ROM-Boot Image support", |
| 329 | 0, |
| 330 | NULL, |
| 331 | atmel_check_params, |
| 332 | atmel_verify_header, |
| 333 | atmel_print_header, |
| 334 | atmel_set_header, |
| 335 | NULL, |
| 336 | atmel_check_image_type, |
| 337 | NULL, |
| 338 | atmel_vrec_header |
| 339 | ); |