blob: c72772589953d04732207639c2cf24ded3a72a6b [file] [log] [blame]
Eugeniu Rosca89c00f02019-07-09 18:27:13 +02001// SPDX-License-Identifier: GPL-2.0
Takeshi Kihara031fa182018-04-11 18:37:42 +09002/*
3 * Device Tree Source for the ebisu board
4 *
5 * Copyright (C) 2018 Renesas Electronics Corp.
6 */
7
8/dts-v1/;
9#include "r8a77990.dtsi"
Marek Vasut0bb5d242018-05-31 18:30:17 +020010#include <dt-bindings/gpio/gpio.h>
Takeshi Kihara031fa182018-04-11 18:37:42 +090011
12/ {
13 model = "Renesas Ebisu board based on r8a77990";
14 compatible = "renesas,ebisu", "renesas,r8a77990";
15
16 aliases {
17 serial0 = &scif2;
Marek Vasut0bb5d242018-05-31 18:30:17 +020018 ethernet0 = &avb;
Takeshi Kihara031fa182018-04-11 18:37:42 +090019 };
20
21 chosen {
Eugeniu Rosca89c00f02019-07-09 18:27:13 +020022 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
Takeshi Kihara031fa182018-04-11 18:37:42 +090023 stdout-path = "serial0:115200n8";
24 };
25
26 memory@48000000 {
27 device_type = "memory";
28 /* first 128MB is reserved for secure area. */
29 reg = <0x0 0x48000000 0x0 0x38000000>;
30 };
Marek Vasut317d13a2019-03-04 22:53:28 +010031
32 audio_clkout: audio-clkout {
33 /*
34 * This is same as <&rcar_sound 0>
35 * but needed to avoid cs2000/rcar_sound probe dead-lock
36 */
37 compatible = "fixed-clock";
38 #clock-cells = <0>;
39 clock-frequency = <11289600>;
40 };
41
42 backlight: backlight {
43 compatible = "pwm-backlight";
44 pwms = <&pwm3 0 50000>;
45
46 brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
47 default-brightness-level = <10>;
48
49 power-supply = <&reg_12p0v>;
50 };
51
52 cvbs-in {
53 compatible = "composite-video-connector";
54 label = "CVBS IN";
55
56 port {
57 cvbs_con: endpoint {
58 remote-endpoint = <&adv7482_ain7>;
59 };
60 };
61 };
62
63 hdmi-in {
64 compatible = "hdmi-connector";
65 label = "HDMI IN";
66 type = "a";
67
68 port {
69 hdmi_in_con: endpoint {
70 remote-endpoint = <&adv7482_hdmi>;
71 };
72 };
73 };
74
75 hdmi-out {
76 compatible = "hdmi-connector";
77 type = "a";
78
79 port {
80 hdmi_con_out: endpoint {
81 remote-endpoint = <&adv7511_out>;
82 };
83 };
84 };
85
86 lvds-decoder {
87 compatible = "thine,thc63lvd1024";
88 vcc-supply = <&reg_3p3v>;
89
90 ports {
91 #address-cells = <1>;
92 #size-cells = <0>;
93
94 port@0 {
95 reg = <0>;
96 thc63lvd1024_in: endpoint {
97 remote-endpoint = <&lvds0_out>;
98 };
99 };
100
101 port@2 {
102 reg = <2>;
103 thc63lvd1024_out: endpoint {
104 remote-endpoint = <&adv7511_in>;
105 };
106 };
107 };
108 };
109
110 vga {
111 compatible = "vga-connector";
112
113 port {
114 vga_in: endpoint {
115 remote-endpoint = <&adv7123_out>;
116 };
117 };
118 };
119
120 vga-encoder {
121 compatible = "adi,adv7123";
122
123 ports {
124 #address-cells = <1>;
125 #size-cells = <0>;
126
127 port@0 {
128 reg = <0>;
129 adv7123_in: endpoint {
130 remote-endpoint = <&du_out_rgb>;
131 };
132 };
133 port@1 {
134 reg = <1>;
135 adv7123_out: endpoint {
136 remote-endpoint = <&vga_in>;
137 };
138 };
139 };
140 };
141
142 reg_1p8v: regulator0 {
143 compatible = "regulator-fixed";
144 regulator-name = "fixed-1.8V";
145 regulator-min-microvolt = <1800000>;
146 regulator-max-microvolt = <1800000>;
147 regulator-boot-on;
148 regulator-always-on;
149 };
150
151 reg_3p3v: regulator1 {
152 compatible = "regulator-fixed";
153 regulator-name = "fixed-3.3V";
154 regulator-min-microvolt = <3300000>;
155 regulator-max-microvolt = <3300000>;
156 regulator-boot-on;
157 regulator-always-on;
158 };
159
160 vbus0_usb2: regulator-vbus0-usb2 {
161 compatible = "regulator-fixed";
162
163 regulator-name = "USB20_VBUS_CN";
164 regulator-min-microvolt = <5000000>;
165 regulator-max-microvolt = <5000000>;
166
167 gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
168 enable-active-high;
169 };
170
171 rsnd_ak4613: sound {
172 compatible = "simple-audio-card";
173
174 simple-audio-card,name = "rsnd-ak4613";
175 simple-audio-card,format = "left_j";
176 simple-audio-card,bitclock-master = <&sndcpu>;
177 simple-audio-card,frame-master = <&sndcpu>;
178
179 sndcpu: simple-audio-card,cpu {
180 sound-dai = <&rcar_sound>;
181 };
182
183 sndcodec: simple-audio-card,codec {
184 sound-dai = <&ak4613>;
185 };
186 };
187
188 x12_clk: x12 {
189 compatible = "fixed-clock";
190 #clock-cells = <0>;
191 clock-frequency = <24576000>;
192 };
193
194 reg_12p0v: regulator2 {
195 compatible = "regulator-fixed";
196 regulator-name = "D12.0V";
197 regulator-min-microvolt = <12000000>;
198 regulator-max-microvolt = <12000000>;
199 regulator-boot-on;
200 regulator-always-on;
201 };
202
203 x13_clk: x13 {
204 compatible = "fixed-clock";
205 #clock-cells = <0>;
206 clock-frequency = <74250000>;
207 };
208
209 vcc_sdhi0: regulator-vcc-sdhi0 {
210 compatible = "regulator-fixed";
211
212 regulator-name = "SDHI0 Vcc";
213 regulator-min-microvolt = <3300000>;
214 regulator-max-microvolt = <3300000>;
215
216 gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
217 enable-active-high;
218 };
219
220 vccq_sdhi0: regulator-vccq-sdhi0 {
221 compatible = "regulator-gpio";
222
223 regulator-name = "SDHI0 VccQ";
224 regulator-min-microvolt = <1800000>;
225 regulator-max-microvolt = <3300000>;
226
227 gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
228 gpios-states = <1>;
229 states = <3300000 1
230 1800000 0>;
231 };
232
233 vcc_sdhi1: regulator-vcc-sdhi1 {
234 compatible = "regulator-fixed";
235
236 regulator-name = "SDHI1 Vcc";
237 regulator-min-microvolt = <3300000>;
238 regulator-max-microvolt = <3300000>;
239
240 gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
241 enable-active-high;
242 };
243
244 vccq_sdhi1: regulator-vccq-sdhi1 {
245 compatible = "regulator-gpio";
246
247 regulator-name = "SDHI1 VccQ";
248 regulator-min-microvolt = <1800000>;
249 regulator-max-microvolt = <3300000>;
250
251 gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
252 gpios-states = <1>;
253 states = <3300000 1
254 1800000 0>;
255 };
256};
257
258&audio_clk_a {
259 clock-frequency = <22579200>;
Takeshi Kihara031fa182018-04-11 18:37:42 +0900260};
261
Marek Vasut0bb5d242018-05-31 18:30:17 +0200262&avb {
263 pinctrl-0 = <&avb_pins>;
264 pinctrl-names = "default";
265 renesas,no-ether-link;
266 phy-handle = <&phy0>;
Marek Vasut0bb5d242018-05-31 18:30:17 +0200267 status = "okay";
268
269 phy0: ethernet-phy@0 {
270 rxc-skew-ps = <1500>;
271 reg = <0>;
272 interrupt-parent = <&gpio2>;
273 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
274 reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
275 };
276};
277
Marek Vasut317d13a2019-03-04 22:53:28 +0100278&canfd {
279 pinctrl-0 = <&canfd0_pins>;
280 pinctrl-names = "default";
281 status = "okay";
282
283 channel0 {
284 status = "okay";
285 };
286};
287
288&csi40 {
289 status = "okay";
290
291 ports {
292 port@0 {
293 reg = <0>;
294
295 csi40_in: endpoint {
296 clock-lanes = <0>;
297 data-lanes = <1 2>;
298 remote-endpoint = <&adv7482_txa>;
299 };
300 };
301 };
302};
303
304&du {
305 pinctrl-0 = <&du_pins>;
306 pinctrl-names = "default";
307 status = "okay";
308
309 clocks = <&cpg CPG_MOD 724>,
310 <&cpg CPG_MOD 723>,
311 <&x13_clk>;
312 clock-names = "du.0", "du.1", "dclkin.0";
313
314 ports {
315 port@0 {
316 endpoint {
317 remote-endpoint = <&adv7123_in>;
318 };
319 };
320 };
321};
322
Hiroyuki Yokoyama2a1eade2018-09-27 19:05:18 +0900323&ehci0 {
Marek Vasut317d13a2019-03-04 22:53:28 +0100324 dr_mode = "otg";
Hiroyuki Yokoyama2a1eade2018-09-27 19:05:18 +0900325 status = "okay";
326};
327
Takeshi Kihara031fa182018-04-11 18:37:42 +0900328&extal_clk {
329 clock-frequency = <48000000>;
330};
331
Marek Vasut317d13a2019-03-04 22:53:28 +0100332&hsusb {
333 dr_mode = "otg";
334 status = "okay";
335};
336
337&i2c0 {
338 status = "okay";
339
Eugeniu Rosca89c00f02019-07-09 18:27:13 +0200340 io_expander: gpio@20 {
341 compatible = "onnn,pca9654";
342 reg = <0x20>;
343 gpio-controller;
344 #gpio-cells = <2>;
345 interrupt-parent = <&gpio2>;
346 interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
347 };
348
Marek Vasut317d13a2019-03-04 22:53:28 +0100349 hdmi-encoder@39 {
350 compatible = "adi,adv7511w";
351 reg = <0x39>;
352 interrupt-parent = <&gpio1>;
353 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
354
355 adi,input-depth = <8>;
356 adi,input-colorspace = "rgb";
357 adi,input-clock = "1x";
358 adi,input-style = <1>;
359 adi,input-justification = "evenly";
360
361 ports {
362 #address-cells = <1>;
363 #size-cells = <0>;
364
365 port@0 {
366 reg = <0>;
367 adv7511_in: endpoint {
368 remote-endpoint = <&thc63lvd1024_out>;
369 };
370 };
371
372 port@1 {
373 reg = <1>;
374 adv7511_out: endpoint {
375 remote-endpoint = <&hdmi_con_out>;
376 };
377 };
378 };
379 };
380
381 video-receiver@70 {
382 compatible = "adi,adv7482";
383 reg = <0x70>;
384
385 #address-cells = <1>;
386 #size-cells = <0>;
387
388 interrupt-parent = <&gpio0>;
389 interrupt-names = "intrq1", "intrq2";
390 interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
391 <17 IRQ_TYPE_LEVEL_LOW>;
392
393 port@7 {
394 reg = <7>;
395
396 adv7482_ain7: endpoint {
397 remote-endpoint = <&cvbs_con>;
398 };
399 };
400
401 port@8 {
402 reg = <8>;
403
404 adv7482_hdmi: endpoint {
405 remote-endpoint = <&hdmi_in_con>;
406 };
407 };
408
409 port@a {
Eugeniu Rosca89c00f02019-07-09 18:27:13 +0200410 reg = <10>;
Marek Vasut317d13a2019-03-04 22:53:28 +0100411
412 adv7482_txa: endpoint {
413 clock-lanes = <0>;
414 data-lanes = <1 2>;
415 remote-endpoint = <&csi40_in>;
416 };
417 };
418 };
419};
420
421&i2c3 {
422 status = "okay";
423
424 ak4613: codec@10 {
425 compatible = "asahi-kasei,ak4613";
426 #sound-dai-cells = <0>;
427 reg = <0x10>;
428 clocks = <&rcar_sound 3>;
429
430 asahi-kasei,in1-single-end;
431 asahi-kasei,in2-single-end;
432 asahi-kasei,out1-single-end;
433 asahi-kasei,out2-single-end;
434 asahi-kasei,out3-single-end;
435 asahi-kasei,out4-single-end;
436 asahi-kasei,out5-single-end;
437 asahi-kasei,out6-single-end;
438 };
439
440 cs2000: clk-multiplier@4f {
441 #clock-cells = <0>;
442 compatible = "cirrus,cs2000-cp";
443 reg = <0x4f>;
444 clocks = <&audio_clkout>, <&x12_clk>;
445 clock-names = "clk_in", "ref_clk";
446
447 assigned-clocks = <&cs2000>;
448 assigned-clock-rates = <24576000>; /* 1/1 divide */
449 };
450};
451
Eugeniu Rosca89c00f02019-07-09 18:27:13 +0200452&i2c_dvfs {
453 status = "okay";
454
455 clock-frequency = <400000>;
456
457 pmic: pmic@30 {
458 pinctrl-0 = <&irq0_pins>;
459 pinctrl-names = "default";
460
461 compatible = "rohm,bd9571mwv";
462 reg = <0x30>;
463 interrupt-parent = <&intc_ex>;
464 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
465 interrupt-controller;
466 #interrupt-cells = <2>;
467 gpio-controller;
468 #gpio-cells = <2>;
469 rohm,ddr-backup-power = <0x1>;
470 rohm,rstbmode-level;
471 };
472};
473
Marek Vasut317d13a2019-03-04 22:53:28 +0100474&lvds0 {
475 status = "okay";
476
477 clocks = <&cpg CPG_MOD 727>,
478 <&x13_clk>,
479 <&extal_clk>;
480 clock-names = "fck", "dclkin.0", "extal";
481
482 ports {
483 port@1 {
484 lvds0_out: endpoint {
485 remote-endpoint = <&thc63lvd1024_in>;
486 };
487 };
488 };
489};
490
491&lvds1 {
Eugeniu Rosca89c00f02019-07-09 18:27:13 +0200492 /*
493 * Even though the LVDS1 output is not connected, the encoder must be
494 * enabled to supply a pixel clock to the DU for the DPAD output when
495 * LVDS0 is in use.
496 */
497 status = "okay";
498
Marek Vasut317d13a2019-03-04 22:53:28 +0100499 clocks = <&cpg CPG_MOD 727>,
500 <&x13_clk>,
501 <&extal_clk>;
502 clock-names = "fck", "dclkin.0", "extal";
503};
504
Marek Vasutcbff9f82018-12-03 21:43:05 +0100505&ohci0 {
Marek Vasut317d13a2019-03-04 22:53:28 +0100506 dr_mode = "otg";
507 status = "okay";
508};
509
510&pcie_bus_clk {
511 clock-frequency = <100000000>;
512};
513
514&pciec0 {
Marek Vasutcbff9f82018-12-03 21:43:05 +0100515 status = "okay";
516};
517
Marek Vasut0bb5d242018-05-31 18:30:17 +0200518&pfc {
519 avb_pins: avb {
520 mux {
521 groups = "avb_link", "avb_mii";
522 function = "avb";
523 };
524 };
Marek Vasut65dcc802018-06-13 21:44:50 +0200525
Marek Vasut317d13a2019-03-04 22:53:28 +0100526 canfd0_pins: canfd0 {
527 groups = "canfd0_data";
528 function = "canfd0";
529 };
530
531 du_pins: du {
532 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
533 function = "du";
534 };
535
Eugeniu Rosca89c00f02019-07-09 18:27:13 +0200536 irq0_pins: irq0 {
537 groups = "intc_ex_irq0";
538 function = "intc_ex";
539 };
540
Marek Vasut317d13a2019-03-04 22:53:28 +0100541 pwm3_pins: pwm3 {
542 groups = "pwm3_b";
543 function = "pwm3";
544 };
545
546 pwm5_pins: pwm5 {
547 groups = "pwm5_a";
548 function = "pwm5";
549 };
550
551 sdhi0_pins: sd0 {
552 groups = "sdhi0_data4", "sdhi0_ctrl";
553 function = "sdhi0";
554 power-source = <3300>;
555 };
556
557 sdhi0_pins_uhs: sd0_uhs {
558 groups = "sdhi0_data4", "sdhi0_ctrl";
559 function = "sdhi0";
560 power-source = <1800>;
561 };
562
563 sdhi1_pins: sd1 {
564 groups = "sdhi1_data4", "sdhi1_ctrl";
565 function = "sdhi1";
566 power-source = <3300>;
567 };
568
569 sdhi1_pins_uhs: sd1_uhs {
570 groups = "sdhi1_data4", "sdhi1_ctrl";
571 function = "sdhi1";
572 power-source = <1800>;
573 };
574
575 sdhi3_pins: sd3 {
576 groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
577 function = "sdhi3";
578 power-source = <1800>;
579 };
580
581 sound_pins: sound {
582 groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
583 function = "ssi";
584 };
585
586 sound_clk_pins: sound_clk {
587 groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
588 "audio_clkout_a", "audio_clkout1_a";
589 function = "audio_clk";
590 };
591
592 scif2_pins: scif2 {
593 groups = "scif2_data_a";
594 function = "scif2";
595 };
596
Marek Vasutcbff9f82018-12-03 21:43:05 +0100597 usb0_pins: usb {
Marek Vasut317d13a2019-03-04 22:53:28 +0100598 groups = "usb0_b", "usb0_id";
Hiroyuki Yokoyama2a1eade2018-09-27 19:05:18 +0900599 function = "usb0";
600 };
Marek Vasutcbff9f82018-12-03 21:43:05 +0100601
602 usb30_pins: usb30 {
603 groups = "usb30";
604 function = "usb30";
605 };
Hiroyuki Yokoyama2a1eade2018-09-27 19:05:18 +0900606};
607
Marek Vasut317d13a2019-03-04 22:53:28 +0100608&pwm3 {
609 pinctrl-0 = <&pwm3_pins>;
610 pinctrl-names = "default";
611
612 status = "okay";
613};
614
615&pwm5 {
616 pinctrl-0 = <&pwm5_pins>;
617 pinctrl-names = "default";
618
619 status = "okay";
620};
621
622&rcar_sound {
623 pinctrl-0 = <&sound_pins &sound_clk_pins>;
624 pinctrl-names = "default";
625
626 /* Single DAI */
627 #sound-dai-cells = <0>;
628
629 /* audio_clkout0/1/2/3 */
630 #clock-cells = <1>;
631 clock-frequency = <12288000 11289600>;
632 clkout-lr-synchronous;
633
634 status = "okay";
635
636 /* update <audio_clk_b> to <cs2000> */
637 clocks = <&cpg CPG_MOD 1005>,
638 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
639 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
640 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
641 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
642 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
643 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
644 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
645 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
646 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
647 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
648 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
649 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
650 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
651 <&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
652 <&cpg CPG_CORE R8A77990_CLK_ZA2>;
653
654 rcar_sound,dai {
655 dai0 {
656 playback = <&ssi0 &src0 &dvc0>;
657 capture = <&ssi1 &src1 &dvc1>;
658 };
659 };
660
661};
662
Marek Vasutcbff9f82018-12-03 21:43:05 +0100663&rwdt {
664 timeout-sec = <60>;
Marek Vasutbc19d282018-05-31 19:56:42 +0200665 status = "okay";
666};
667
Takeshi Kihara031fa182018-04-11 18:37:42 +0900668&scif2 {
Marek Vasut317d13a2019-03-04 22:53:28 +0100669 pinctrl-0 = <&scif2_pins>;
670 pinctrl-names = "default";
671
Takeshi Kihara031fa182018-04-11 18:37:42 +0900672 status = "okay";
673};
Marek Vasutcbff9f82018-12-03 21:43:05 +0100674
Marek Vasut317d13a2019-03-04 22:53:28 +0100675&ssi1 {
676 shared-pin;
677};
678
Marek Vasutcbff9f82018-12-03 21:43:05 +0100679&usb2_phy0 {
680 pinctrl-0 = <&usb0_pins>;
681 pinctrl-names = "default";
682
Marek Vasut317d13a2019-03-04 22:53:28 +0100683 vbus-supply = <&vbus0_usb2>;
684 status = "okay";
685};
686
687&usb3_peri0 {
688 companion = <&xhci0>;
689 status = "okay";
690};
691
692&vin4 {
Marek Vasutcbff9f82018-12-03 21:43:05 +0100693 status = "okay";
694};
695
Eugeniu Rosca89c00f02019-07-09 18:27:13 +0200696&vin5 {
697 status = "okay";
698};
699
Marek Vasutcbff9f82018-12-03 21:43:05 +0100700&xhci0 {
701 pinctrl-0 = <&usb30_pins>;
702 pinctrl-names = "default";
703
704 status = "okay";
705};
Marek Vasut317d13a2019-03-04 22:53:28 +0100706
707&sdhi0 {
708 pinctrl-0 = <&sdhi0_pins>;
709 pinctrl-1 = <&sdhi0_pins_uhs>;
710 pinctrl-names = "default", "state_uhs";
711
712 vmmc-supply = <&vcc_sdhi0>;
713 vqmmc-supply = <&vccq_sdhi0>;
714 cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
715 wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
716 bus-width = <4>;
717 sd-uhs-sdr50;
718 sd-uhs-sdr104;
719 status = "okay";
720};
721
722&sdhi1 {
723 pinctrl-0 = <&sdhi1_pins>;
724 pinctrl-1 = <&sdhi1_pins_uhs>;
725 pinctrl-names = "default", "state_uhs";
726
727 vmmc-supply = <&vcc_sdhi1>;
728 vqmmc-supply = <&vccq_sdhi1>;
729 cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
730 bus-width = <4>;
731 sd-uhs-sdr50;
732 sd-uhs-sdr104;
733 status = "okay";
734};
735
736&sdhi3 {
737 /* used for on-board 8bit eMMC */
738 pinctrl-0 = <&sdhi3_pins>;
739 pinctrl-1 = <&sdhi3_pins>;
740 pinctrl-names = "default", "state_uhs";
741
742 vmmc-supply = <&reg_3p3v>;
743 vqmmc-supply = <&reg_1p8v>;
744 mmc-hs200-1_8v;
745 mmc-hs400-1_8v;
746 bus-width = <8>;
747 non-removable;
748 status = "okay";
749};