| mingming lee | 13e89d7 | 2019-11-07 19:28:40 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 | /* |
| 3 | * Copyright (C) 2019 MediaTek Inc. |
| 4 | * Author: Mingming Lee <mingming.lee@mediatek.com> |
| 5 | * |
| 6 | */ |
| 7 | |
| 8 | #include <dt-bindings/clock/mt8518-clk.h> |
| 9 | #include <dt-bindings/gpio/gpio.h> |
| 10 | #include <dt-bindings/interrupt-controller/irq.h> |
| 11 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 12 | |
| 13 | / { |
| 14 | compatible = "mediatek,mt8518"; |
| 15 | interrupt-parent = <&sysirq>; |
| 16 | #address-cells = <1>; |
| 17 | #size-cells = <1>; |
| 18 | |
| 19 | |
| 20 | |
| 21 | topckgen: clock-controller@10000000 { |
| 22 | compatible = "mediatek,mt8518-topckgen"; |
| 23 | reg = <0x10000000 0x1000>; |
| 24 | #clock-cells = <1>; |
| 25 | }; |
| 26 | |
| 27 | gic: interrupt-controller@0c000000 { |
| 28 | compatible = "arm,gic-v3"; |
| 29 | #interrupt-cells = <3>; |
| 30 | interrupt-parent = <&gic>; |
| 31 | interrupt-controller; |
| 32 | reg = <0xc000000 0x40000>, /* GICD */ |
| 33 | <0xc100000 0x200000>; /* GICR */ |
| 34 | interrupts = <GIC_PPI 9 |
| 35 | (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 36 | }; |
| 37 | |
| 38 | sysirq: interrupt-controller@10200a80 { |
| 39 | compatible = "mediatek,sysirq"; |
| 40 | interrupt-controller; |
| 41 | #interrupt-cells = <3>; |
| 42 | interrupt-parent = <&gic>; |
| 43 | reg = <0x10200a80 0x50>; |
| 44 | }; |
| 45 | |
| 46 | timer0: apxgpt@10008000 { |
| 47 | compatible = "mediatek,timer"; |
| 48 | reg = <0x10008000 0x1000>; |
| 49 | interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_LOW>; |
| 50 | clocks = <&topckgen CLK_TOP_CLK26M_D2>, |
| 51 | <&topckgen CLK_TOP_CLK32K>, |
| 52 | <&topckgen CLK_TOP_APXGPT>; |
| 53 | clock-names = "clk13m", |
| 54 | "clk32k", |
| 55 | "bus"; |
| 56 | }; |
| 57 | |
| 58 | watchdog0: watchdog@10007000 { |
| 59 | compatible = "mediatek,wdt"; |
| 60 | reg = <0x10007000 0x1000>; |
| 61 | interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_FALLING>; |
| 62 | #reset-cells = <1>; |
| 63 | status = "disabled"; |
| 64 | timeout-sec = <60>; |
| 65 | reset-on-timeout; |
| 66 | }; |
| 67 | |
| mingming lee | 485627d | 2019-11-07 19:28:43 +0800 | [diff] [blame] | 68 | pinctrl: pinctrl@10005000 { |
| 69 | compatible = "mediatek,mt8518-pinctrl"; |
| 70 | reg = <0x10005000 0x1000>; |
| 71 | gpio: gpio-controller { |
| 72 | gpio-controller; |
| 73 | #gpio-cells = <2>; |
| 74 | }; |
| 75 | }; |
| mingming lee | 13e89d7 | 2019-11-07 19:28:40 +0800 | [diff] [blame] | 76 | |
| 77 | mmc0: mmc@11120000 { |
| 78 | compatible = "mediatek,mt8516-mmc"; |
| 79 | reg = <0x11120000 0x1000>; |
| 80 | interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>; |
| 81 | clocks = <&topckgen CLK_TOP_MSDC0>, |
| 82 | <&topckgen CLK_TOP_MSDC0>, |
| 83 | <&topckgen CLK_TOP_MSDC0_B>; |
| 84 | clock-names = "source", "hclk", "source_cg"; |
| 85 | status = "disabled"; |
| 86 | }; |
| 87 | |
| 88 | uart0: serial@11005000 { |
| 89 | compatible = "mediatek,hsuart"; |
| 90 | reg = <0x11005000 0x1000>; |
| 91 | interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; |
| 92 | clocks = <&topckgen CLK_TOP_UART0_SEL>, |
| 93 | <&topckgen CLK_TOP_UART0>; |
| 94 | clock-names = "baud", "bus"; |
| 95 | status = "disabled"; |
| 96 | }; |
| 97 | |
| 98 | }; |