blob: 5218d9ca97593b7a7a237315b616d284c6882ed0 [file] [log] [blame]
Stefan Roese8b7d1f02007-01-31 16:37:34 +01001/*
2 * (C) Copyright 2003-2004
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24
25/*************************************************************************
26 * (c) 2005 esd gmbh Hannover
27 *
28 *
29 * from IceCube.h file
30 * by Reinhard Arlt reinhard.arlt@esd-electronics.com
31 *
32 *************************************************************************/
33
34#ifndef __CONFIG_H
35#define __CONFIG_H
36
37/*
38 * High Level Configuration Options
39 * (easy to change)
40 */
41
42#define CONFIG_MPC5200 1 /* This is an MPC5xxx CPU */
43#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
44#define CONFIG_ICECUBE 1 /* ... on IceCube board */
45#define CONFIG_MECP5200 1 /* ... on MECP5200 board */
46#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */
47
48#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
49
50#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
51#define BOOTFLAG_WARM 0x02 /* Software reboot */
52
Stefan Roese8b7d1f02007-01-31 16:37:34 +010053/*
54 * Serial console configuration
55 */
56#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
57#if 0 /* test-only */
58#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
59#else
60#define CONFIG_BAUDRATE 9600 /* ... at 115200 bps */
61#endif
62#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
63
64
65#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
66
67#define CONFIG_MII
68#if 0 /* test-only !!! */
69#define CONFIG_NET_MULTI 1
70#define CONFIG_EEPRO100 1
71#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
72#define CONFIG_NS8382X 1
73#endif
74
75#else /* MPC5100 */
76
77#endif
78
79/* Partitions */
80#define CONFIG_MAC_PARTITION
81#define CONFIG_DOS_PARTITION
82
83/* USB */
84#if 0
85#define CONFIG_USB_OHCI
Stefan Roese8b7d1f02007-01-31 16:37:34 +010086#define CONFIG_USB_STORAGE
Stefan Roese8b7d1f02007-01-31 16:37:34 +010087#endif
88
Stefan Roese8b7d1f02007-01-31 16:37:34 +010089
Jon Loeligerd794cfe2007-07-04 22:31:15 -050090/*
Jon Loeliger7f5c0152007-07-10 09:38:02 -050091 * BOOTP options
92 */
93#define CONFIG_BOOTP_BOOTFILESIZE
94#define CONFIG_BOOTP_BOOTPATH
95#define CONFIG_BOOTP_GATEWAY
96#define CONFIG_BOOTP_HOSTNAME
97
98
99/*
Jon Loeligerd794cfe2007-07-04 22:31:15 -0500100 * Command line configuration.
101 */
102#include <config_cmd_default.h>
103
104#define CONFIG_CMD_EEPROM
105#define CONFIG_CMD_FAT
106#define CONFIG_CMD_EXT2
107#define CONFIG_CMD_I2C
108#define CONFIG_CMD_IDE
109#define CONFIG_CMD_BSP
110#define CONFIG_CMD_ELF
111
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100112
113#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
Wolfgang Denk74357112007-02-27 14:26:04 +0100114# define CFG_LOWBOOT 1
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100115# define CFG_LOWBOOT16 1
116#endif
117#if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
Wolfgang Denk74357112007-02-27 14:26:04 +0100118# define CFG_LOWBOOT 1
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100119# define CFG_LOWBOOT08 1
120#endif
121
122/*
123 * Autobooting
124 */
125#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
126
127#define CONFIG_PREBOOT "echo;" \
128 "echo Welcome to CBX-CPU5200 (mecp5200);" \
129 "echo"
130
131#undef CONFIG_BOOTARGS
132
133#define CONFIG_EXTRA_ENV_SETTINGS \
134 "netdev=eth0\0" \
Wolfgang Denk74357112007-02-27 14:26:04 +0100135 "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \
136 "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \
137 "net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \
138 "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \
139 "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \
140 "loadaddr=01000000\0" \
141 "serverip=192.168.2.99\0" \
142 "gatewayip=10.0.0.79\0" \
143 "user=mu\0" \
144 "target=mecp5200.esd\0" \
145 "script=mecp5200.bat\0" \
146 "image=/tftpboot/vxWorks_mecp5200\0" \
147 "ipaddr=10.0.13.196\0" \
148 "netmask=255.255.0.0\0" \
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100149 ""
150
151#define CONFIG_BOOTCOMMAND "run flash_vxworks0"
152
153#if defined(CONFIG_MPC5200)
154/*
155 * IPB Bus clocking configuration.
156 */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200157#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100158#endif
159/*
160 * I2C configuration
161 */
162#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
163#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
164
165#define CFG_I2C_SPEED 86000 /* 100 kHz */
166#define CFG_I2C_SLAVE 0x7F
167
168/*
169 * EEPROM configuration
170 */
171#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
172#define CFG_I2C_EEPROM_ADDR_LEN 2
173#define CFG_EEPROM_PAGE_WRITE_BITS 5
174#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
Wolfgang Denk74357112007-02-27 14:26:04 +0100175#define CFG_I2C_MULTI_EEPROMS 1
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100176/*
177 * Flash configuration
178 */
179#define CFG_FLASH_BASE 0xFFC00000
Wolfgang Denk74357112007-02-27 14:26:04 +0100180#define CFG_FLASH_SIZE 0x00400000
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100181#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x003E0000)
182#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
183#define CFG_MAX_FLASH_SECT 512
184
185#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
186#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
187
188/*
189 * Environment settings
190 */
191#if 1 /* test-only */
192#define CFG_ENV_IS_IN_FLASH 1
193#define CFG_ENV_SIZE 0x10000
194#define CFG_ENV_SECT_SIZE 0x10000
195#define CONFIG_ENV_OVERWRITE 1
196#else
197#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
198#define CFG_ENV_OFFSET 0x0000 /* environment starts at the beginning of the EEPROM */
199#define CFG_ENV_SIZE 0x0400 /* 8192 bytes may be used for env vars*/
200 /* total size of a CAT24WC32 is 8192 bytes */
201#define CONFIG_ENV_OVERWRITE 1
202#endif
203
Wolfgang Denk74357112007-02-27 14:26:04 +0100204#define CFG_FLASH_CFI_DRIVER 1 /* Flash is CFI conformant */
205#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
206#define CFG_FLASH_PROTECTION 1 /* use hardware protection */
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100207#if 0
208#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
209#endif
Wolfgang Denk74357112007-02-27 14:26:04 +0100210#define CFG_FLASH_INCREMENT 0x00400000 /* size of flash bank */
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100211#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
Wolfgang Denk74357112007-02-27 14:26:04 +0100212#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100213
214
215/*
216 * Memory map
217 */
218#define CFG_MBAR 0xF0000000
219#define CFG_SDRAM_BASE 0x00000000
220#define CFG_DEFAULT_MBAR 0x80000000
221
222/* Use SRAM until RAM will be available */
223#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
224#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
225
226
227#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
228#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
229#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
230
231#define CFG_MONITOR_BASE TEXT_BASE
232#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
233# define CFG_RAMBOOT 1
234#endif
235
236#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
237#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
238#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
239
240/*
241 * Ethernet configuration
242 */
243#define CONFIG_MPC5xxx_FEC 1
244/*
245 * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
246 */
247/* #define CONFIG_FEC_10MBIT 1 */
248#define CONFIG_PHY_ADDR 0x00
249#define CONFIG_UDP_CHECKSUM 1
250
251
252/*
253 * GPIO configuration
254 */
255#define CFG_GPS_PORT_CONFIG 0x01052444
256
257/*
258 * Miscellaneous configurable options
259 */
260#define CFG_LONGHELP /* undef to save memory */
261#define CFG_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeligerd794cfe2007-07-04 22:31:15 -0500262#if defined(CONFIG_CMD_KGDB)
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100263#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
264#else
265#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
266#endif
267#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
268#define CFG_MAXARGS 16 /* max number of command args */
269#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
270
271#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
272#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
273
274#define CFG_LOAD_ADDR 0x100000 /* default load address */
275
Wolfgang Denk74357112007-02-27 14:26:04 +0100276#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100277
278#define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
279
Jon Loeligerd794cfe2007-07-04 22:31:15 -0500280#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
281#if defined(CONFIG_CMD_KGDB)
282# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
283#endif
284
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100285/*
286 * Various low-level settings
287 */
288#if defined(CONFIG_MPC5200)
289#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
290#define CFG_HID0_FINAL HID0_ICE
291#else
292#define CFG_HID0_INIT 0
293#define CFG_HID0_FINAL 0
294#endif
295
296#define CFG_BOOTCS_START CFG_FLASH_BASE
297#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
298#define CFG_BOOTCS_CFG 0x00085d00
299
300#define CFG_CS0_START CFG_FLASH_BASE
301#define CFG_CS0_SIZE CFG_FLASH_SIZE
302
303#define CFG_CS1_START 0xfd000000
304#define CFG_CS1_SIZE 0x00010000
305#define CFG_CS1_CFG 0x10101410
306
307#define CFG_CS_BURST 0x00000000
308#define CFG_CS_DEADCYCLE 0x33333333
309
310#define CFG_RESET_ADDRESS 0xff000000
311
312/*-----------------------------------------------------------------------
313 * USB stuff
314 *-----------------------------------------------------------------------
315 */
316#define CONFIG_USB_CLOCK 0x0001BBBB
317#define CONFIG_USB_CONFIG 0x00001000
318
319/*-----------------------------------------------------------------------
320 * IDE/ATA stuff Supports IDE harddisk
321 *-----------------------------------------------------------------------
322 */
323
324#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
325
326#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
327#undef CONFIG_IDE_LED /* LED for ide not supported */
328
329#define CONFIG_IDE_RESET /* reset for ide supported */
330#define CONFIG_IDE_PREINIT
331
332#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
333#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
334
335#define CFG_ATA_IDE0_OFFSET 0x0000
336
337#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
338
339/* Offset for data I/O */
340#define CFG_ATA_DATA_OFFSET (0x0060)
341
342/* Offset for normal register accesses */
343#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
344
345/* Offset for alternate registers */
346#define CFG_ATA_ALT_OFFSET (0x005C)
347
Wolfgang Denk74357112007-02-27 14:26:04 +0100348/* Interval between registers */
349#define CFG_ATA_STRIDE 4
Stefan Roese8b7d1f02007-01-31 16:37:34 +0100350
351#endif /* __CONFIG_H */