Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Peng Fan | 9300f71 | 2016-05-03 10:02:23 +0800 | [diff] [blame] | 2 | /* |
| 3 | * Take drivers/gpio/gpio-74x164.c as reference. |
| 4 | * |
| 5 | * 74Hx164 - Generic serial-in/parallel-out 8-bits shift register GPIO driver |
| 6 | * |
| 7 | * Copyright (C) 2016 Peng Fan <van.freenix@gmail.com> |
| 8 | * |
Peng Fan | 9300f71 | 2016-05-03 10:02:23 +0800 | [diff] [blame] | 9 | */ |
| 10 | |
| 11 | #include <common.h> |
| 12 | #include <errno.h> |
| 13 | #include <dm.h> |
| 14 | #include <fdtdec.h> |
| 15 | #include <malloc.h> |
| 16 | #include <asm/gpio.h> |
| 17 | #include <asm/io.h> |
| 18 | #include <dt-bindings/gpio/gpio.h> |
| 19 | #include <spi.h> |
| 20 | |
| 21 | DECLARE_GLOBAL_DATA_PTR; |
| 22 | |
| 23 | /* |
| 24 | * struct gen_74x164_chip - Data for 74Hx164 |
| 25 | * |
| 26 | * @oe: OE pin |
| 27 | * @nregs: number of registers |
| 28 | * @buffer: buffer for chained chips |
| 29 | */ |
| 30 | #define GEN_74X164_NUMBER_GPIOS 8 |
| 31 | |
| 32 | struct gen_74x164_priv { |
| 33 | struct gpio_desc oe; |
| 34 | u32 nregs; |
| 35 | /* |
| 36 | * Since the nregs are chained, every byte sent will make |
| 37 | * the previous byte shift to the next register in the |
| 38 | * chain. Thus, the first byte sent will end up in the last |
| 39 | * register at the end of the transfer. So, to have a logical |
| 40 | * numbering, store the bytes in reverse order. |
| 41 | */ |
| 42 | u8 *buffer; |
| 43 | }; |
| 44 | |
| 45 | static int gen_74x164_write_conf(struct udevice *dev) |
| 46 | { |
| 47 | struct gen_74x164_priv *priv = dev_get_priv(dev); |
| 48 | int ret; |
| 49 | |
| 50 | ret = dm_spi_claim_bus(dev); |
| 51 | if (ret) |
| 52 | return ret; |
| 53 | |
| 54 | ret = dm_spi_xfer(dev, priv->nregs * 8, priv->buffer, NULL, |
| 55 | SPI_XFER_BEGIN | SPI_XFER_END); |
| 56 | |
| 57 | dm_spi_release_bus(dev); |
| 58 | |
| 59 | return ret; |
| 60 | } |
| 61 | |
| 62 | static int gen_74x164_get_value(struct udevice *dev, unsigned offset) |
| 63 | { |
| 64 | struct gen_74x164_priv *priv = dev_get_priv(dev); |
| 65 | uint bank = priv->nregs - 1 - offset / 8; |
| 66 | uint pin = offset % 8; |
| 67 | |
| 68 | return (priv->buffer[bank] >> pin) & 0x1; |
| 69 | } |
| 70 | |
| 71 | static int gen_74x164_set_value(struct udevice *dev, unsigned offset, |
| 72 | int value) |
| 73 | { |
| 74 | struct gen_74x164_priv *priv = dev_get_priv(dev); |
| 75 | uint bank = priv->nregs - 1 - offset / 8; |
| 76 | uint pin = offset % 8; |
| 77 | int ret; |
| 78 | |
| 79 | if (value) |
| 80 | priv->buffer[bank] |= 1 << pin; |
| 81 | else |
| 82 | priv->buffer[bank] &= ~(1 << pin); |
| 83 | |
| 84 | ret = gen_74x164_write_conf(dev); |
| 85 | if (ret) |
| 86 | return ret; |
| 87 | |
| 88 | return 0; |
| 89 | } |
| 90 | |
| 91 | static int gen_74x164_direction_input(struct udevice *dev, unsigned offset) |
| 92 | { |
| 93 | return -ENOSYS; |
| 94 | } |
| 95 | |
| 96 | static int gen_74x164_direction_output(struct udevice *dev, unsigned offset, |
| 97 | int value) |
| 98 | { |
| 99 | return gen_74x164_set_value(dev, offset, value); |
| 100 | } |
| 101 | |
| 102 | static int gen_74x164_get_function(struct udevice *dev, unsigned offset) |
| 103 | { |
| 104 | return GPIOF_OUTPUT; |
| 105 | } |
| 106 | |
| 107 | static int gen_74x164_xlate(struct udevice *dev, struct gpio_desc *desc, |
Simon Glass | 3a57123 | 2017-05-18 20:09:18 -0600 | [diff] [blame] | 108 | struct ofnode_phandle_args *args) |
Peng Fan | 9300f71 | 2016-05-03 10:02:23 +0800 | [diff] [blame] | 109 | { |
| 110 | desc->offset = args->args[0]; |
| 111 | desc->flags = args->args[1] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0; |
| 112 | |
| 113 | return 0; |
| 114 | } |
| 115 | |
| 116 | static const struct dm_gpio_ops gen_74x164_ops = { |
| 117 | .direction_input = gen_74x164_direction_input, |
| 118 | .direction_output = gen_74x164_direction_output, |
| 119 | .get_value = gen_74x164_get_value, |
| 120 | .set_value = gen_74x164_set_value, |
| 121 | .get_function = gen_74x164_get_function, |
| 122 | .xlate = gen_74x164_xlate, |
| 123 | }; |
| 124 | |
| 125 | static int gen_74x164_probe(struct udevice *dev) |
| 126 | { |
| 127 | struct gen_74x164_priv *priv = dev_get_priv(dev); |
| 128 | struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| 129 | char *str, name[32]; |
| 130 | int ret; |
| 131 | const void *fdt = gd->fdt_blob; |
Simon Glass | e160f7d | 2017-01-17 16:52:55 -0700 | [diff] [blame] | 132 | int node = dev_of_offset(dev); |
Peng Fan | 9300f71 | 2016-05-03 10:02:23 +0800 | [diff] [blame] | 133 | |
| 134 | snprintf(name, sizeof(name), "%s_", dev->name); |
| 135 | str = strdup(name); |
| 136 | if (!str) |
| 137 | return -ENOMEM; |
| 138 | |
| 139 | /* |
| 140 | * See Linux kernel: |
| 141 | * Documentation/devicetree/bindings/gpio/gpio-74x164.txt |
| 142 | */ |
| 143 | priv->nregs = fdtdec_get_int(fdt, node, "registers-number", 1); |
| 144 | priv->buffer = calloc(priv->nregs, sizeof(u8)); |
| 145 | if (!priv->buffer) { |
| 146 | ret = -ENOMEM; |
| 147 | goto free_str; |
| 148 | } |
| 149 | |
| 150 | ret = fdtdec_get_byte_array(fdt, node, "registers-default", |
| 151 | priv->buffer, priv->nregs); |
| 152 | if (ret) |
| 153 | dev_dbg(dev, "No registers-default property\n"); |
| 154 | |
| 155 | ret = gpio_request_by_name(dev, "oe-gpios", 0, &priv->oe, |
| 156 | GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); |
| 157 | if (ret) { |
Peng Fan | aab203e | 2017-04-13 14:09:56 +0800 | [diff] [blame] | 158 | dev_dbg(dev, "No oe-pins property\n"); |
Peng Fan | 9300f71 | 2016-05-03 10:02:23 +0800 | [diff] [blame] | 159 | } |
| 160 | |
| 161 | uc_priv->bank_name = str; |
| 162 | uc_priv->gpio_count = priv->nregs * 8; |
| 163 | |
| 164 | ret = gen_74x164_write_conf(dev); |
| 165 | if (ret) |
| 166 | goto free_buf; |
| 167 | |
| 168 | dev_dbg(dev, "%s is ready\n", dev->name); |
| 169 | |
| 170 | return 0; |
| 171 | |
| 172 | free_buf: |
| 173 | free(priv->buffer); |
| 174 | free_str: |
| 175 | free(str); |
| 176 | return ret; |
| 177 | } |
| 178 | |
| 179 | static const struct udevice_id gen_74x164_ids[] = { |
| 180 | { .compatible = "fairchild,74hc595" }, |
| 181 | { } |
| 182 | }; |
| 183 | |
| 184 | U_BOOT_DRIVER(74x164) = { |
| 185 | .name = "74x164", |
| 186 | .id = UCLASS_GPIO, |
| 187 | .ops = &gen_74x164_ops, |
| 188 | .probe = gen_74x164_probe, |
| 189 | .priv_auto_alloc_size = sizeof(struct gen_74x164_priv), |
| 190 | .of_match = gen_74x164_ids, |
| 191 | }; |