| Schuyler Patton | 45e7f7e | 2016-11-25 11:14:25 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 as |
| 6 | * published by the Free Software Foundation. |
| 7 | */ |
| 8 | /dts-v1/; |
| 9 | |
| 10 | #include "dra72x.dtsi" |
| 11 | #include <dt-bindings/gpio/gpio.h> |
| 12 | #include <dt-bindings/interrupt-controller/irq.h> |
| 13 | #include "am57xx-idk-common.dtsi" |
| 14 | |
| 15 | / { |
| 16 | model = "TI AM5718 IDK"; |
| 17 | compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"; |
| 18 | |
| 19 | memory@80000000 { |
| 20 | device_type = "memory"; |
| 21 | reg = <0x0 0x80000000 0x0 0x40000000>; |
| 22 | }; |
| 23 | |
| 24 | leds { |
| 25 | compatible = "gpio-leds"; |
| 26 | cpu0-led { |
| 27 | label = "status0:red:cpu0"; |
| 28 | gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; |
| 29 | default-state = "off"; |
| 30 | linux,default-trigger = "cpu0"; |
| 31 | }; |
| 32 | |
| 33 | usr0-led { |
| 34 | label = "status0:green:usr"; |
| 35 | gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; |
| 36 | default-state = "off"; |
| 37 | }; |
| 38 | |
| 39 | heartbeat-led { |
| 40 | label = "status0:blue:heartbeat"; |
| 41 | gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; |
| 42 | default-state = "off"; |
| 43 | linux,default-trigger = "heartbeat"; |
| 44 | }; |
| 45 | |
| 46 | usr1-led { |
| 47 | label = "status1:red:usr"; |
| 48 | gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; |
| 49 | default-state = "off"; |
| 50 | }; |
| 51 | |
| 52 | usr2-led { |
| 53 | label = "status1:green:usr"; |
| 54 | gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; |
| 55 | default-state = "off"; |
| 56 | }; |
| 57 | |
| 58 | mmc0-led { |
| 59 | label = "status1:blue:mmc0"; |
| 60 | gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; |
| 61 | default-state = "off"; |
| 62 | linux,default-trigger = "mmc0"; |
| 63 | }; |
| 64 | }; |
| 65 | |
| 66 | extcon_usb2: extcon_usb2 { |
| 67 | compatible = "linux,extcon-usb-gpio"; |
| 68 | id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; |
| 69 | }; |
| 70 | }; |
| 71 | |
| 72 | &mmc1 { |
| 73 | status = "okay"; |
| 74 | vmmc-supply = <&ldo1_reg>; |
| 75 | bus-width = <4>; |
| 76 | cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ |
| 77 | }; |
| 78 | |
| 79 | &omap_dwc3_2 { |
| 80 | extcon = <&extcon_usb2>; |
| 81 | }; |