blob: 096ff0b5a53a2acdacc57dfe662447bd5836476f [file] [log] [blame]
Jelle van der Waa348df5b2016-09-13 18:03:23 +02001/*
2 * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/pinctrl/sun4i-a10.h>
49
50/ {
51 model = "FriendlyARM NanoPi NEO";
52 compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
53
54 aliases {
55 serial0 = &uart0;
56 };
57
58 chosen {
59 stdout-path = "serial0:115200n8";
60 };
61
62 leds {
63 compatible = "gpio-leds";
64 pinctrl-names = "default";
65 pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
66
67 pwr {
68 label = "nanopi:green:pwr";
69 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
70 default-state = "on";
71 };
72
73 status {
74 label = "nanopi:blue:status";
75 gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
76 };
77 };
78};
79
80&ehci3 {
81 status = "okay";
82};
83
84&mmc0 {
85 pinctrl-names = "default";
86 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
87 vmmc-supply = <&reg_vcc3v3>;
88 bus-width = <4>;
89 cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
90 cd-inverted;
91 status = "okay";
92};
93
94&ohci3 {
95 status = "okay";
96};
97
98&pio {
99 leds_opc: led-pins {
100 allwinner,pins = "PA10";
101 allwinner,function = "gpio_out";
102 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
103 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
104 };
105};
106
107&r_pio {
108 leds_r_opc: led-pins {
109 allwinner,pins = "PL10";
110 allwinner,function = "gpio_out";
111 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
112 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
113 };
114};
115
116&uart0 {
117 pinctrl-names = "default";
118 pinctrl-0 = <&uart0_pins_a>;
119 status = "okay";
120};
121
122&usbphy {
123 /* USB VBUS is always on */
124 status = "okay";
125};
Jelle van der Waa2fc554d2016-12-05 19:47:21 +0100126
127&emac {
128 phy = <&phy1>;
129 phy-mode = "mii";
130 allwinner,use-internal-phy;
131 allwinner,leds-active-low;
132 status = "okay";
133 phy1: ethernet-phy@1 {
134 reg = <1>;
135 };
136};