wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame^] | 1 | /* |
| 2 | * (C) Copyright 2002 |
| 3 | * Daniel Engström, Omicron Ceti AB, daniel@omicron.se |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | */ |
| 23 | |
| 24 | #include <common.h> |
| 25 | #include <pci.h> |
| 26 | #include <asm/io.h> |
| 27 | #include <asm/pci.h> |
| 28 | |
| 29 | #ifdef CONFIG_PCI |
| 30 | #undef PCI_ROM_SCAN_VERBOSE |
| 31 | |
| 32 | int pci_shadow_rom(pci_dev_t dev, unsigned char *dest) |
| 33 | { |
| 34 | struct pci_controller *hose; |
| 35 | int res = -1; |
| 36 | int i; |
| 37 | |
| 38 | u32 rom_addr; |
| 39 | u32 addr_reg; |
| 40 | u32 size; |
| 41 | |
| 42 | u16 vendor; |
| 43 | u16 device; |
| 44 | u32 class_code; |
| 45 | |
| 46 | hose = pci_bus_to_hose(PCI_BUS(dev)); |
| 47 | #if 0 |
| 48 | printf("pci_shadow_rom() asked to shadow device %x to %x\n", |
| 49 | dev, (u32)dest); |
| 50 | #endif |
| 51 | pci_read_config_word(dev, PCI_VENDOR_ID, &vendor); |
| 52 | pci_read_config_word(dev, PCI_DEVICE_ID, &device); |
| 53 | pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_code); |
| 54 | |
| 55 | class_code &= 0xffffff00; |
| 56 | class_code >>= 8; |
| 57 | |
| 58 | #if 0 |
| 59 | printf("PCI Header Vendor %04x device %04x class %06x\n", |
| 60 | vendor, device, class_code); |
| 61 | #endif |
| 62 | /* Enable the rom addess decoder */ |
| 63 | pci_write_config_dword(dev, PCI_ROM_ADDRESS, PCI_ROM_ADDRESS_MASK); |
| 64 | pci_read_config_dword(dev, PCI_ROM_ADDRESS, &addr_reg); |
| 65 | |
| 66 | if (!addr_reg) { |
| 67 | /* register unimplemented */ |
| 68 | printf("pci_chadow_rom: device do not seem to have a rom\n"); |
| 69 | return -1; |
| 70 | } |
| 71 | |
| 72 | size = (~(addr_reg&PCI_ROM_ADDRESS_MASK))+1; |
| 73 | |
| 74 | #if 0 |
| 75 | printf("ROM is %d bytes\n", size); |
| 76 | #endif |
| 77 | rom_addr = pci_get_rom_window(hose, size); |
| 78 | #if 0 |
| 79 | printf("ROM mapped at %x \n", rom_addr); |
| 80 | #endif |
| 81 | pci_write_config_dword(dev, PCI_ROM_ADDRESS, |
| 82 | pci_phys_to_mem(dev, rom_addr) |
| 83 | |PCI_ROM_ADDRESS_ENABLE); |
| 84 | |
| 85 | |
| 86 | |
| 87 | for (i=rom_addr;i<rom_addr+size; i+=512) { |
| 88 | |
| 89 | |
| 90 | if (readw(i) == 0xaa55) { |
| 91 | u32 pci_data; |
| 92 | #ifdef PCI_ROM_SCAN_VERBOSE |
| 93 | printf("ROM signature found\n"); |
| 94 | #endif |
| 95 | pci_data = readw(0x18+i); |
| 96 | pci_data += i; |
| 97 | |
| 98 | if (0==memcmp((void*)pci_data, "PCIR", 4)) { |
| 99 | #ifdef PCI_ROM_SCAN_VERBOSE |
| 100 | printf("Fount PCI rom image at offset %d\n", i-rom_addr); |
| 101 | printf("Vendor %04x device %04x class %06x\n", |
| 102 | readw(pci_data+4), readw(pci_data+6), |
| 103 | readl(pci_data+0x0d)&0xffffff); |
| 104 | printf("%s\n", |
| 105 | (readw(pci_data+0x15) &0x80)? |
| 106 | "Last image":"More images follow"); |
| 107 | switch (readb(pci_data+0x14)) { |
| 108 | case 0: |
| 109 | printf("X86 code\n"); |
| 110 | break; |
| 111 | case 1: |
| 112 | printf("Openfirmware code\n"); |
| 113 | break; |
| 114 | case 2: |
| 115 | printf("PARISC code\n"); |
| 116 | break; |
| 117 | } |
| 118 | printf("Image size %d\n", readw(pci_data+0x10) * 512); |
| 119 | #endif |
| 120 | /* FixMe: I think we should compare the class code |
| 121 | * bytes as well but I have no reference on the |
| 122 | * exact order of these bytes in the PCI ROM header */ |
| 123 | if (readw(pci_data+4) == vendor && |
| 124 | readw(pci_data+6) == device && |
| 125 | /* (readl(pci_data+0x0d)&0xffffff) == class_code && */ |
| 126 | readb(pci_data+0x14) == 0 /* x86 code image */ ) { |
| 127 | #ifdef PCI_ROM_SCAN_VERBOSE |
| 128 | printf("Suitable ROM image found, copying\n"); |
| 129 | #endif |
| 130 | memmove(dest, (void*)rom_addr, readw(pci_data+0x10) * 512); |
| 131 | res = 0; |
| 132 | break; |
| 133 | |
| 134 | } |
| 135 | if (readw(pci_data+0x15) &0x80) { |
| 136 | break; |
| 137 | } |
| 138 | } |
| 139 | } |
| 140 | |
| 141 | } |
| 142 | |
| 143 | #ifdef PCI_ROM_SCAN_VERBOSE |
| 144 | if (res) { |
| 145 | printf("No suitable image found\n"); |
| 146 | } |
| 147 | #endif |
| 148 | /* disable PAR register and PCI device ROM address devocer */ |
| 149 | pci_remove_rom_window(hose, rom_addr); |
| 150 | |
| 151 | pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0); |
| 152 | |
| 153 | return res; |
| 154 | } |
| 155 | |
| 156 | #endif |