blob: c6cfbb8033e8cc38e494444effd72c61d43c6ecd [file] [log] [blame]
Heiko Schocher71423432016-06-13 15:16:01 +02001/*
2 * Copyright (C) 2014 DENX Software Engineering GmbH
3 * Heiko Schocher <hs@denx.de>
4 *
5 * Based on:
6 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12/dts-v1/;
13
14#include "am33xx.dtsi"
15#include <dt-bindings/input/input.h>
16
17/ {
18 model = "RUT";
19 compatible = "ti,am335x-evm", "ti,am33xx";
20
21 buzzer {
22 compatible = "pwm-beeper";
23 pwms = <&ecap0 0 16000 0>;
24 };
25
26 chosen {
27 stdout-path = &uart0;
28 tick-timer = &timer2;
29 };
30
31 cpus {
32 cpu@0 {
33 cpu0-supply = <&dcdc2_reg>;
34 };
35 };
36
37 gpio_keys: powerfail-keys {
38 compatible = "gpio-keys";
39 #address-cells = <1>;
40 #size-cells = <0>;
41 autorepeat;
42
43 pwr-fail0 {
44 label = "power-fail";
45 linux,code = <KEY_POWER>;
46 gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
47 gpio-key,wakeup;
48 };
49
50 pwr-fail1 {
51 label = "power-fail-redundant";
52 linux,code = <KEY_POWER>;
53 gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
54 gpio-key,wakeup;
55 };
56 };
57
58 leds {
59 compatible = "gpio-leds";
60
61 led_green {
62 label = "rut:green:debug:run_mode";
63 gpios = <&gpio3 20 1>;
64 /* activelow = 1, default trigger heartbeat */
65 };
66 led_yellow {
67 label = "rut:debug:yellow:osc_ch1";
68 gpios = <&gpio0 17 1>;
69 /* activelow = 1, default trigger mmc0 */
70 };
71 led_red {
72 label = "rut:debug:red:osc_ch2";
73 gpios = <&gpio0 16 1>;
74 /* activelow = 1, default trigger debug_osc_ch2 */
75 };
76 /* optional */
77 led_alive {
78 label = "rut:alive";
79 gpios = <&gpio0 15 1>;
80 linux,default-trigger = "heartbeat";
81 /* activelow = 1, default trigger heartbeat */
82 };
83
84 };
85
86 memory {
87 device_type = "memory";
88 reg = <0x80000000 0x10000000>; /* 256 MB */
89 };
90
91 panel {
92 compatible = "ti,tilcdc,panel";
93 pinctrl-names = "default";
94 pinctrl-0 = <&lcd_pins_s0>;
95 status = "okay";
96
97 /* FORMIKE_KWH043ST20_F01 */
98 panel-info {
99 ac-bias = <255>;
100 ac-bias-intrpt = <0>;
101 dma-burst-sz = <16>;
102 bpp = <16>;
103 fdd = <0x80>;
104 sync-edge = <0>;
105 sync-ctrl = <1>;
106 raster-order = <0>;
107 fifo-th = <0>;
108 tft-alt-mode = <0>;
109 invert-pxl-clk = <1>;
110 };
111
112 display-timings {
113 native-mode = <&timing1>;
114 timing1: 480x800p60 {
115 clock-frequency = <29925000>;
116 hactive = <480>;
117 vactive = <800>;
118 hfront-porch = <50>;
119 hback-porch = <50>;
120 hsync-len = <50>;
121 vback-porch = <50>;
122 vfront-porch = <50>;
123 vsync-len = <50>;
124 hsync-active = <1>;
125 vsync-active = <1>;
126 };
127 };
128 };
129
130 vmmc: fixedregulator3 {
131 compatible = "regulator-fixed";
132 regulator-name = "vmmc";
133 regulator-min-microvolt = <3300000>;
134 regulator-max-microvolt = <3300000>;
135 };
136
137 watchdog {
138 compatible = "linux,wdt-gpio";
139 gpios = <&gpio0 14 0>;
140 hw_algo = "level";
141 hw_margin_ms = <30000>;
142 };
143};
144
145&aes {
146 status = "okay";
147};
148
149&cppi41dma {
150 status = "okay";
151};
152
153&cpsw_emac0 {
154 phy_id = <&davinci_mdio>, <1>;
155 phy-mode = "rmii";
156};
157
158&cpsw_emac1 {
159 phy_id = <&davinci_mdio>, <0>;
160 phy-mode = "rmii";
161};
162
163&davinci_mdio {
164 pinctrl-names = "default", "sleep";
165 pinctrl-0 = <&davinci_mdio_default>;
166 pinctrl-1 = <&davinci_mdio_sleep>;
167 status = "okay";
168 gpios = <&gpio2 18 0>;
169
170 ethernet_phy: ethernet-phy@1 {
171 compatible = "ethernet-phy-id2000.5ce1";
172 reg = <1>;
173 natsemi,master_mode_fixup;
174 };
175};
176
177&elm {
178 status = "okay";
179};
180
181&epwmss0 {
182 status = "okay";
183
184 ecap0: ecap@48300100 {
185 status = "okay";
186 pinctrl-names = "default";
187 pinctrl-0 = <&ecap0_pins>;
188 };
189};
190
191&epwmss1 {
192 status = "okay";
193
194 ehrpwm1: ehrpwm@48302200 {
195 status = "okay";
196 pinctrl-names = "default";
197 pinctrl-0 = <&epwmss1_pins>;
198 };
199};
200
201&gpmc {
202 pinctrl-names = "default";
203 pinctrl-0 = <&nandflash_pins>;
204 status = "okay";
205
206 ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
207
208 nand@0,0 {
209 reg = <0 0 0>; /* CS0, offset 0 */
210 nand-bus-width = <8>;
211 ti,nand-ecc-opt = "bch8";
212 gpmc,device-nand = "true";
213 gpmc,device-width = <1>;
214 gpmc,sync-clk-ps = <0>;
215 gpmc,cs-on-ns = <0>;
216 gpmc,cs-rd-off-ns = <57>;
217 gpmc,cs-wr-off-ns = <57>;
218 gpmc,adv-on-ns = <0>;
219 gpmc,adv-rd-off-ns = <57>;
220 gpmc,adv-wr-off-ns = <57>;
221 gpmc,we-on-ns = <0>;
222 gpmc,we-off-ns = <48>;
223 gpmc,oe-on-ns = <0>;
224 gpmc,oe-off-ns = <57>;
225 gpmc,access-ns = <38>;
226 gpmc,rd-cycle-ns = <67>;
227 gpmc,wr-cycle-ns = <67>;
228 gpmc,wait-on-read = "true";
229 gpmc,wait-on-write = "true";
230 gpmc,bus-turnaround-ns = <0>;
231 gpmc,cycle2cycle-delay-ns = <0>;
232 gpmc,clk-activation-ns = <0>;
233 gpmc,wait-monitoring-ns = <0>;
234 gpmc,wr-access-ns = <96>;
235 gpmc,wr-data-mux-bus-ns = <0>;
236
237 #address-cells = <1>;
238 #size-cells = <1>;
239 elm_id = <&elm>;
240 };
241};
242
243&i2c0 {
244 pinctrl-names = "default";
245 pinctrl-0 = <&i2c0_pins>;
246 clock-frequency = <400000>;
247 status = "okay";
248
249 eeprom: eeprom@50 {
250 compatible = "atmel,24c128";
251 reg = <0x50>;
252 pagesize = <32>;
253 };
254
255 tps: tps@24 {
256 reg = <0x24>;
257 };
258};
259
260&i2c1 {
261 pinctrl-names = "default";
262 pinctrl-0 = <&i2c1_pins>;
263 clock-frequency = <100000>;
264 status = "okay";
265
266 atmel: atmel_mxt_ts@4a {
267 compatible = "atmel,maxtouch";
268 reg = <0x4a>;
269 interrupt-parent = <&gpio1>;
270 interrupts = <28 8>;
271 gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
272 };
273
274 temp@48 {
275 compatible = "st,ds75";
276 reg = <0x4c>;
277 };
278};
279
280&lcdc {
281 status = "okay";
282};
283
284&mac {
285 pinctrl-names = "default", "sleep";
286 pinctrl-0 = <&cpsw_default>;
287 pinctrl-1 = <&cpsw_sleep>;
288 status = "okay";
289};
290
291&mmc1 {
292 vmmc-supply = <&vmmc>;
293 pinctrl-names = "default";
294 pinctrl-0 = <&mmc1_pins>;
295 status = "okay";
296};
297
298&phy_sel {
299 rmii-clock-ext;
300};
301
302&sham {
303 status = "okay";
304};
305
306&spi0 {
307 pinctrl-names = "default";
308 pinctrl-0 = <&spi0_pins>;
309 status = "okay";
310 spi-flash@0 {
311 #address-cells = <1>;
312 #size-cells = <1>;
313 compatible = "mx25l25635e";
314 reg = <0>; /* Chip select 0 */
315 spi-max-frequency = <24000000>;
316
317 partition@0 {
318 label = "dummy";
319 reg = <0x0000000 0x8000>;
320 };
321 };
322};
323
324&spi1 {
325 pinctrl-names = "default";
326 pinctrl-0 = <&spi1_pins>;
327 status = "okay";
328
329 lcd_init: lcd@0 {
330 compatible = "formike,kwh043st20";
331 reg = <0>;
332 reset-gpios = <&gpio3 19 0>;
333 spi-max-frequency = <1200000>;
334 spi-cpol;
335 spi-cpha;
336 power-on-delay = <10>;
337 reset-delay = <10>;
338 };
339};
340
341/include/ "tps65217.dtsi"
342
343&tps {
344 backlight0: backlight {
345 isel = <1>; /* 1 - ISET1, 2 ISET2 */
346 fdim = <1000>; /* TPS65217_BL_FDIM_100HZ */
347 default-brightness = <80>;
348 };
349
350 regulators {
351 dcdc1_reg: regulator@0 {
352 regulator-always-on;
353 };
354
355 dcdc2_reg: regulator@1 {
356 /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
357 regulator-name = "vdd_mpu";
358 regulator-min-microvolt = <925000>;
359 regulator-max-microvolt = <1325000>;
360 regulator-boot-on;
361 regulator-always-on;
362 };
363
364 dcdc3_reg: regulator@2 {
365 /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
366 regulator-name = "vdd_core";
367 regulator-min-microvolt = <925000>;
368 regulator-max-microvolt = <1150000>;
369 regulator-boot-on;
370 regulator-always-on;
371 };
372
373 ldo1_reg: regulator@3 {
374 regulator-always-on;
375 };
376
377 ldo2_reg: regulator@4 {
378 regulator-always-on;
379 };
380
381 ldo3_reg: regulator@5 {
382 regulator-always-on;
383 };
384
385 ldo4_reg: regulator@6 {
386 regulator-always-on;
387 };
388 };
389};
390
391&tscadc {
392 status = "okay";
393 adc {
394 ti,adc-channels = <4 5 6 7>;
395 };
396};
397
398&uart0 {
399 pinctrl-names = "default";
400 pinctrl-0 = <&uart0_pins>;
401
402 status = "okay";
403};
404
405&usb {
406 status = "okay";
407};
408
409&usb_ctrl_mod {
410 status = "okay";
411};
412
413&usb0 {
414 dr_mode = "device";
415 status = "okay";
416};
417
418&usb0_phy {
419 status = "okay";
420};
421
422&am33xx_pinmux {
423 pinctrl-names = "default";
424 pinctrl-0 = <&clkout2_pin &gpio_pin>;
425
426 clkout2_pin: pinmux_clkout2_pin {
427 pinctrl-single,pins = <
428 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
429 >;
430 };
431
432 cpsw_default: cpsw_default {
433 pinctrl-single,pins = <
434 /* Slave 1 */
435 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
436 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.mii1_rxerr */
437 0x114 (MUX_MODE1) /* mii1_txen.mii1_txen */
438 0x124 (MUX_MODE1) /* mii1_txd1.mii1_txd1 */
439 0x128 (MUX_MODE1) /* mii1_txd0.mii1_txd0 */
440 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.mii1_rxd1 */
441 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.mii1_rxd0 */
442 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
443 >;
444 };
445
446 cpsw_sleep: cpsw_sleep {
447 pinctrl-single,pins = <
448 /* Slave 1 reset value */
449 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
450 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
451 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
452 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
453 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
454 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
455 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
456 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
457 >;
458 };
459
460 davinci_mdio_default: davinci_mdio_default {
461 pinctrl-single,pins = <
462 /* MDIO */
463 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
464 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
465 >;
466 };
467
468 davinci_mdio_sleep: davinci_mdio_sleep {
469 pinctrl-single,pins = <
470 /* MDIO reset value */
471 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
472 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
473 >;
474 };
475
476 ecap0_pins: ecap_pins {
477 pinctrl-single,pins = <
478 0x164 (MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 buzzer frequency: ecap.0 */
479 >;
480 };
481
482 epwmss1_pins: epwmss_pins {
483 pinctrl-single,pins = <
484 0x48 (PIN_INPUT | MUX_MODE7) /* gpmc_a2.gpio1_18 buzzer frequency: ehrpwm1A high-Z due to connected to ecap0 by R0469 */
485 0x4c (MUX_MODE6) /* gpmc_a3.ehrpwm1B buzzer volume pwm */
486 >;
487 };
488
489 gpio_pin: gpio_pin {
490 pinctrl-single,pins = <
491 0x6c (PIN_INPUT | MUX_MODE7) /* gpmc_a11.gpio1_27 PWR_FAIL_GPIO_SPARE */
492 0x78 (PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) /* gpmc_be1n.gpio1_28 TOUCH_CHANGE_N */
493 0x88 (PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) /* gpmc_csn3.gpio2_0 RUT_GPIO0_GPIO */
494 0x118 (PIN_INPUT | MUX_MODE7) /* gmii1_rxdv.gpio3_4 PWR_FAIL_GPIO */
495 0x11c (MUX_MODE7) /* mii1_txd3.gpio0_16 DEBUG_OSC_CH2_GPIO */
496 0x120 (MUX_MODE7) /* mii1_txd2.gpio0_17 DEBUG_OSC_CH1_GPIO */
497 0x134 (MUX_MODE7) /* gmii1_rxd3.gpio2_18 PHY_RSTn_GPIO */
498 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gmii1_rxd2.gpio2_19 PHY_INT_GPIO */
499 0x180 (MUX_MODE7) /* uart1_rxd.gpio0_14 WATCHDOG_TRIGGER_GPIO */
500 0x184 (MUX_MODE7) /* uart1_txd.gpio0_15 ALIVE_LED_N_GPIO */
501 0x1a0 (MUX_MODE7) /* mcasp0_aclkr.gpio3_18 MAXTOUCH_RESET_GPIO */
502 0x1a4 (MUX_MODE7) /* mcasp0_fsr.gpio3_19 DISPLAY_RESET_GPIO */
503 0x1a8 (MUX_MODE7) /* mcasp0_axr1.gpio3_20 DEBUG_RUN_MODE_GPIO */
504 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 NORFLASH_WP_GPIO */
505 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
506 >;
507 };
508
509 i2c0_pins: pinmux_i2c0_pins {
510 pinctrl-single,pins = <
511 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
512 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
513 >;
514 };
515
516 i2c1_pins: pinmux_i2c1_pins {
517 pinctrl-single,pins = <
518 0x168 (PIN_INPUT | MUX_MODE3) /* uart0_ctsn.i2c1_sda */
519 0x16c (PIN_INPUT | MUX_MODE3) /* uart0.rtsn.i2c1_scl */
520 >;
521 };
522
523 lcd_pins_s0: lcd_pins_s0 {
524 pinctrl-single,pins = <
525 0x20 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
526 0x24 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
527 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
528 0x2c (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
529 0x30 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
530 0x34 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
531 0x38 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
532 0x3c (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
533 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
534 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
535 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
536 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
537 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
538 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
539 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
540 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
541 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
542 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
543 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
544 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
545 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
546 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
547 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
548 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
549 0xe0 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */
550 0xe4 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */
551 0xe8 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */
552 0xec (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
553 >;
554 };
555
556 mmc1_pins: mmc1_pins {
557 pinctrl-single,pins = <
558 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
559 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
560 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
561 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
562 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
563 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
564 >;
565 };
566
567 nandflash_pins: pinmux_nandflash_pins {
568 pinctrl-single,pins = <
569 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
570 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
571 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
572 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
573 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
574 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
575 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
576 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
577 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
578 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
579 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
580 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
581 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
582 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
583 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
584 >;
585 };
586
587 spi0_pins: pinmux_spi0_pins {
588 pinctrl-single,pins = <
589 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_sclk.spi0_sclk */
590 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
591 0x158 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d1.spi0_d1 */
592 0x15c (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_CS0.spi0_CS0 */
593 >;
594 };
595
596 spi1_pins: pinmux_spi1_pins {
597 pinctrl-single,pins = <
598 0x190 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */
599 0x194 (PIN_INPUT_PULLUP | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
600 0x198 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
601 0x19c (PIN_INPUT_PULLUP | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
602 >;
603 };
604
605 uart0_pins: pinmux_uart0_pins {
606 pinctrl-single,pins = <
607 0x170 (PIN_INPUT | MUX_MODE0) /* uart0_rxd.uart0_rxd */
608 0x174 (PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */
609 >;
610 };
611};