blob: 6f6666281abb6eea67081827fdd12ee6fff1071a [file] [log] [blame]
Andrej Rosano3bf801a2015-04-08 18:56:30 +02001/*
2 * USB armory MkI board configuration settings
3 * http://inversepath.com/usbarmory
4 *
5 * Copyright (C) 2015, Inverse Path
6 * Andrej Rosano <andrej@inversepath.com>
7 *
8 * SPDX-License-Identifier:|____GPL-2.0+
9 */
10
11#ifndef __CONFIG_H
12#define __CONFIG_H
13
14#define CONFIG_MX53
15#define CONFIG_DISPLAY_CPUINFO
16#define CONFIG_DISPLAY_BOARDINFO
Gong Qianyu18fb0e32015-10-26 19:47:42 +080017#define CONFIG_SYS_FSL_CLK
Andrej Rosano3bf801a2015-04-08 18:56:30 +020018#define CONFIG_BOARD_EARLY_INIT_F
19#define CONFIG_OF_LIBFDT
Andrej Rosano3bf801a2015-04-08 18:56:30 +020020#define CONFIG_MXC_GPIO
21
22#include <asm/arch/imx-regs.h>
Andrej Rosano3bf801a2015-04-08 18:56:30 +020023
24#include <config_distro_defaults.h>
25
26/* U-Boot commands */
27#define CONFIG_CMD_MEMTEST
Andrej Rosano3bf801a2015-04-08 18:56:30 +020028
29/* U-Boot environment */
30#define CONFIG_ENV_OVERWRITE
31#define CONFIG_SYS_NO_FLASH
32#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
33#define CONFIG_ENV_SIZE (8 * 1024)
34#define CONFIG_ENV_IS_IN_MMC
35#define CONFIG_SYS_MMC_ENV_DEV 0
36
37/* U-Boot general configurations */
38#define CONFIG_SYS_CBSIZE 512
39#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
40#define CONFIG_SYS_MAXARGS 16
41#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
42
43/* UART */
44#define CONFIG_MXC_UART
45#define CONFIG_MXC_UART_BASE UART1_BASE
46#define CONFIG_CONS_INDEX 1
47#define CONFIG_BAUDRATE 115200
48
49/* SD/MMC */
50#define CONFIG_CMD_MMC
51#define CONFIG_FSL_ESDHC
52#define CONFIG_SYS_FSL_ESDHC_ADDR 0
53#define CONFIG_SYS_FSL_ESDHC_NUM 1
54#define CONFIG_MMC
55#define CONFIG_GENERIC_MMC
56
57/* USB */
58#define CONFIG_CMD_USB
59#define CONFIG_USB_EHCI
60#define CONFIG_USB_EHCI_MX5
61#define CONFIG_USB_STORAGE
62#define CONFIG_MXC_USB_PORT 1
63#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
64#define CONFIG_MXC_USB_FLAGS 0
65
66/* I2C */
67#define CONFIG_CMD_I2C
68#define CONFIG_SYS_I2C
69#define CONFIG_SYS_I2C_MXC
Albert ARIBAUD \\(3ADEV\\)03544c62015-09-21 22:43:38 +020070#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
71#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
Andrej Rosano3bf801a2015-04-08 18:56:30 +020072
73/* Fuse */
74#define CONFIG_CMD_FUSE
75#define CONFIG_FSL_IIM
76
77/* Linux boot */
78#define CONFIG_LOADADDR 0x72000000
79#define CONFIG_SYS_TEXT_BASE 0x77800000
80#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
81#define CONFIG_HOSTNAME usbarmory
82#define CONFIG_BOOTCOMMAND \
83 "run distro_bootcmd; " \
84 "setenv bootargs console=${console} ${bootargs_default}; " \
85 "ext2load mmc 0:1 ${kernel_addr_r} /boot/uImage; " \
86 "ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; " \
87 "bootm ${kernel_addr_r} - ${fdt_addr_r}"
88
89#define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
90
91#include <config_distro_bootcmd.h>
92
93#define MEM_LAYOUT_ENV_SETTINGS \
94 "kernel_addr_r=0x70800000\0" \
95 "fdt_addr_r=0x71000000\0" \
96 "scriptaddr=0x70800000\0" \
97 "pxefile_addr_r=0x70800000\0" \
98 "ramdisk_addr_r=0x73000000\0"
99
100#define CONFIG_EXTRA_ENV_SETTINGS \
101 MEM_LAYOUT_ENV_SETTINGS \
102 "bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0" \
103 "fdtfile=imx53-usbarmory.dtb\0" \
104 "console=ttymxc0,115200\0" \
105 BOOTENV
106
107/* Physical Memory Map */
108#define CONFIG_NR_DRAM_BANKS 1
109#define PHYS_SDRAM CSD0_BASE_ADDR
110#define PHYS_SDRAM_SIZE (gd->ram_size)
111
112#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
113#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
114#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
115
116#define CONFIG_SYS_INIT_SP_OFFSET \
117 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
118#define CONFIG_SYS_INIT_SP_ADDR \
119 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
120
121#define CONFIG_SYS_MEMTEST_START 0x70000000
122#define CONFIG_SYS_MEMTEST_END 0x90000000
123
124#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
125
126#endif /* __CONFIG_H */