blob: 0a75abde3f33d2816ce5a014507823b65ba01e6b [file] [log] [blame]
Detlev Zundel7b5611c2009-03-30 00:31:34 +02001/*
2 * (C) Copyright 2008, 2009 Andreas Pfefferle,
3 * DENX Software Engineering, ap@denx.de.
4 * (C) Copyright 2009 Detlev Zundel,
5 * DENX Software Engineering, dzu@denx.de.
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25
26#include <asm/io.h>
27#include <common.h>
28#include <config.h>
29#include <mpc5xxx.h>
30#include <pci.h>
31
32#include <command.h>
33
34/* This is needed for the includes in ns16550.h */
35#define CONFIG_SYS_NS16550_REG_SIZE 1
36#include <ns16550.h>
37
38#define GPIO_BASE ((u_char *)CONFIG_SYS_CS3_START)
39
40#define DIGIN_TOUCHSCR_MASK 0x00003000 /* Inputs 12-13 */
41#define DIGIN_KEYB_MASK 0x00010000 /* Input 16 */
42
43#define DIGIN_DRAWER_SW1 0x00400000 /* Input 22 */
44#define DIGIN_DRAWER_SW2 0x00800000 /* Input 23 */
45
46#define DIGIO_LED0 0x00000001 /* Output 0 */
47#define DIGIO_LED1 0x00000002 /* Output 1 */
48#define DIGIO_LED2 0x00000004 /* Output 2 */
49#define DIGIO_LED3 0x00000008 /* Output 3 */
50#define DIGIO_LED4 0x00000010 /* Output 4 */
51#define DIGIO_LED5 0x00000020 /* Output 5 */
52
53#define DIGIO_DRAWER1 0x00000100 /* Output 8 */
54#define DIGIO_DRAWER2 0x00000200 /* Output 9 */
55
56#define SERIAL_PORT_BASE ((u_char *)CONFIG_SYS_CS2_START)
57
58#define PSC_OP1_RTS 0x01
59#define PSC_OP0_RTS 0x01
60
61/*
62 * Table with supported baudrates (defined in inka4x0.h)
63 */
64static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE;
65#define N_BAUDRATES (sizeof(baudrate_table) / sizeof(baudrate_table[0]))
66
67static unsigned int inka_digin_get_input(void)
68{
69 return in_8(GPIO_BASE + 0) << 0 | in_8(GPIO_BASE + 1) << 8 |
70 in_8(GPIO_BASE + 2) << 16 | in_8(GPIO_BASE + 3) << 24;
71}
72
73#define LED_HIGH(NUM) \
74 do { \
75 setbits_be32((unsigned *)MPC5XXX_GPT##NUM##_ENABLE, 0x10); \
76 } while (0)
77
78#define LED_LOW(NUM) \
79 do { \
80 clrbits_be32((unsigned *)MPC5XXX_GPT##NUM##_ENABLE, 0x10); \
81 } while (0)
82
83#define CHECK_LED(NUM) \
84 do { \
85 if (state & (1 << NUM)) { \
86 LED_HIGH(NUM); \
87 } else { \
88 LED_LOW(NUM); \
89 } \
90 } while (0)
91
92static void inka_digio_set_output(unsigned int state, int which)
93{
94 volatile struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
95
96 if (which == 0) {
97 /* other */
98 CHECK_LED(0);
99 CHECK_LED(1);
100 CHECK_LED(2);
101 CHECK_LED(3);
102 CHECK_LED(4);
103 CHECK_LED(5);
104 } else {
105 if (which == 1) {
106 /* drawer1 */
107 if (state) {
108 clrbits_be32(&gpio->simple_dvo, 0x1000);
109 udelay(1);
110 setbits_be32(&gpio->simple_dvo, 0x1000);
111 } else {
112 setbits_be32(&gpio->simple_dvo, 0x1000);
113 udelay(1);
114 clrbits_be32(&gpio->simple_dvo, 0x1000);
115 }
116 }
117 if (which == 2) {
118 /* drawer 2 */
119 if (state) {
120 clrbits_be32(&gpio->simple_dvo, 0x2000);
121 udelay(1);
122 setbits_be32(&gpio->simple_dvo, 0x2000);
123 } else {
124 setbits_be32(&gpio->simple_dvo, 0x2000);
125 udelay(1);
126 clrbits_be32(&gpio->simple_dvo, 0x2000);
127 }
128 }
129 }
130 udelay(1);
131}
132
133static int do_inkadiag_io(cmd_tbl_t *cmdtp, int flag, int argc,
134 char *argv[]) {
135 unsigned int state, val;
136
137 switch (argc) {
138 case 3:
139 /* Write a value */
140 val = simple_strtol(argv[2], NULL, 16);
141
142 if (strcmp(argv[1], "drawer1") == 0) {
143 inka_digio_set_output(val, 1);
144 } else if (strcmp(argv[1], "drawer2") == 0) {
145 inka_digio_set_output(val, 2);
146 } else if (strcmp(argv[1], "other") == 0)
147 inka_digio_set_output(val, 0);
148 else {
149 printf("Invalid argument: %s\n", argv[1]);
150 return -1;
151 }
152 /* fall through */
153 case 2:
154 /* Read a value */
155 state = inka_digin_get_input();
156
157 if (strcmp(argv[1], "drawer1") == 0) {
158 val = (state & DIGIN_DRAWER_SW1) >> (ffs(DIGIN_DRAWER_SW1) - 1);
159 } else if (strcmp(argv[1], "drawer2") == 0) {
160 val = (state & DIGIN_DRAWER_SW2) >> (ffs(DIGIN_DRAWER_SW2) - 1);
161 } else if (strcmp(argv[1], "other") == 0) {
162 val = ((state & DIGIN_KEYB_MASK) >> (ffs(DIGIN_KEYB_MASK) - 1))
163 | (state & DIGIN_TOUCHSCR_MASK) >> (ffs(DIGIN_TOUCHSCR_MASK) - 2);
164 } else {
165 printf("Invalid argument: %s\n", argv[1]);
166 return -1;
167 }
168 printf("exit code: 0x%X\n", val);
169 return 0;
170 default:
171 cmd_usage(cmdtp);
172 break;
173 }
174
175 return -1;
176}
177
178DECLARE_GLOBAL_DATA_PTR;
179
180static int ser_init(volatile struct mpc5xxx_psc *psc, int baudrate)
181{
182 unsigned long baseclk;
183 int div;
184
185 /* reset PSC */
186 out_8(&psc->command, PSC_SEL_MODE_REG_1);
187
188 /* select clock sources */
189
190 out_be16(&psc->psc_clock_select, 0);
191 baseclk = (gd->ipb_clk + 16) / 32;
192
193 /* switch to UART mode */
194 out_be32(&psc->sicr, 0);
195
196 /* configure parity, bit length and so on */
197
198 out_8(&psc->mode, PSC_MODE_8_BITS | PSC_MODE_PARNONE);
199 out_8(&psc->mode, PSC_MODE_ONE_STOP);
200
201 /* set up UART divisor */
202 div = (baseclk + (baudrate / 2)) / baudrate;
203 out_8(&psc->ctur, (div >> 8) & 0xff);
204 out_8(&psc->ctlr, div & 0xff);
205
206 /* disable all interrupts */
207 out_be16(&psc->psc_imr, 0);
208
209 /* reset and enable Rx/Tx */
210 out_8(&psc->command, PSC_RST_RX);
211 out_8(&psc->command, PSC_RST_TX);
212 out_8(&psc->command, PSC_RX_ENABLE | PSC_TX_ENABLE);
213
214 return 0;
215}
216
217static void ser_putc(volatile struct mpc5xxx_psc *psc, const char c)
218{
219 /* Wait 1 second for last character to go. */
220 int i = 0;
221
222 while (!(psc->psc_status & PSC_SR_TXEMP) && (i++ < 1000000/10))
223 udelay(10);
224 psc->psc_buffer_8 = c;
225
226}
227
228static int ser_getc(volatile struct mpc5xxx_psc *psc)
229{
230 /* Wait for a character to arrive. */
231 int i = 0;
232
233 while (!(in_be16(&psc->psc_status) & PSC_SR_RXRDY) && (i++ < 1000000/10))
234 udelay(10);
235
236 return in_8(&psc->psc_buffer_8);
237}
238
239static int do_inkadiag_serial(cmd_tbl_t *cmdtp, int flag, int argc,
240 char *argv[]) {
241 volatile struct NS16550 *uart;
242 volatile struct mpc5xxx_psc *psc;
243 unsigned int num, mode;
244 int combrd, baudrate, i, j, len;
245 int address;
246
247 if (argc < 5) {
248 cmd_usage(cmdtp);
249 return 1;
250 }
251
252 argc--;
253 argv++;
254
255 num = simple_strtol(argv[0], NULL, 0);
256 if (num < 0 || num > 11) {
257 printf("invalid argument for num: %d\n", num);
258 return -1;
259 }
260
261 mode = simple_strtol(argv[1], NULL, 0);
262
263 combrd = 0;
264 baudrate = simple_strtoul(argv[2], NULL, 10);
265 for (i=0; i<N_BAUDRATES; ++i) {
266 if (baudrate == baudrate_table[i])
267 break;
268 }
269 if (i == N_BAUDRATES) {
270 printf("## Baudrate %d bps not supported\n",
271 baudrate);
272 return 1;
273 }
274 combrd = 115200 / baudrate;
275
276 uart = (struct NS16550 *)(SERIAL_PORT_BASE + (num << 3));
277
278 printf("Testing uart %d.\n\n", num);
279
280 if ((num >= 0) && (num <= 7)) {
281 if (mode & 1) {
282 /* turn on 'loopback' mode */
Detlev Zundel200779e2009-04-03 11:53:01 +0200283 out_8(&uart->mcr, UART_MCR_LOOP);
Detlev Zundel7b5611c2009-03-30 00:31:34 +0200284 } else {
285 /*
286 * establish the UART's operational parameters
287 * set DLAB=1, so rbr accesses DLL
288 */
Detlev Zundel200779e2009-04-03 11:53:01 +0200289 out_8(&uart->lcr, UART_LCR_DLAB);
Detlev Zundel7b5611c2009-03-30 00:31:34 +0200290 /* set baudrate */
291 out_8(&uart->rbr, combrd);
292 /* set data-format: 8-N-1 */
Detlev Zundel200779e2009-04-03 11:53:01 +0200293 out_8(&uart->lcr, UART_LCR_WLS_8);
Detlev Zundel7b5611c2009-03-30 00:31:34 +0200294 }
295
296 if (mode & 2) {
297 /* set request to send */
Detlev Zundel200779e2009-04-03 11:53:01 +0200298 out_8(&uart->mcr, UART_MCR_RTS);
Detlev Zundel7b5611c2009-03-30 00:31:34 +0200299 udelay(10);
300 /* check clear to send */
Detlev Zundel200779e2009-04-03 11:53:01 +0200301 if ((in_8(&uart->msr) & UART_MSR_CTS) == 0x00)
Detlev Zundel7b5611c2009-03-30 00:31:34 +0200302 return -1;
303 }
304 if (mode & 4) {
305 /* set data terminal ready */
Detlev Zundel200779e2009-04-03 11:53:01 +0200306 out_8(&uart->mcr, UART_MCR_DTR);
Detlev Zundel7b5611c2009-03-30 00:31:34 +0200307 udelay(10);
308 /* check data set ready and carrier detect */
Detlev Zundel200779e2009-04-03 11:53:01 +0200309 if ((in_8(&uart->msr) & (UART_MSR_DSR | UART_MSR_DCD))
310 != (UART_MSR_DSR | UART_MSR_DCD))
Detlev Zundel7b5611c2009-03-30 00:31:34 +0200311 return -1;
312 }
313
314 /* write each message-character, read it back, and display it */
315 for (i = 0, len = strlen(argv[3]); i < len; ++i) {
316 j = 0;
Detlev Zundel200779e2009-04-03 11:53:01 +0200317 while ((in_8(&uart->lsr) & UART_LSR_THRE) == 0x00) {
Detlev Zundel7b5611c2009-03-30 00:31:34 +0200318 if (j++ > CONFIG_SYS_HZ)
319 break;
320 udelay(10);
321 }
322 out_8(&uart->rbr, argv[3][i]);
323 j = 0;
Detlev Zundel200779e2009-04-03 11:53:01 +0200324 while ((in_8(&uart->lsr) & UART_LSR_DR) == 0x00) {
Detlev Zundel7b5611c2009-03-30 00:31:34 +0200325 if (j++ > CONFIG_SYS_HZ)
326 break;
327 udelay(10);
328 }
329 printf("%c", in_8(&uart->rbr));
330 }
331 printf("\n\n");
332 out_8(&uart->mcr, 0x00);
333 } else {
334 address = 0;
335
336 switch (num) {
337 case 8:
338 address = MPC5XXX_PSC6;
339 break;
340 case 9:
341 address = MPC5XXX_PSC3;
342 break;
343 case 10:
344 address = MPC5XXX_PSC2;
345 break;
346 case 11:
347 address = MPC5XXX_PSC1;
348 break;
349 }
350 psc = (struct mpc5xxx_psc *)address;
351 ser_init(psc, simple_strtol(argv[2], NULL, 0));
352 if (mode & 2) {
353 /* set request to send */
354 out_8(&psc->op0, PSC_OP0_RTS);
355 udelay(10);
356 /* check clear to send */
357 if ((in_8(&psc->ip) & PSC_IPCR_CTS) == 0)
358 return -1;
359 }
360 len = strlen(argv[3]);
361 for (i = 0; i < len; ++i) {
362 ser_putc(psc, argv[3][i]);
363 printf("%c", ser_getc(psc));
364 }
365 printf("\n\n");
366 }
367 return 0;
368}
369
370#define BUZZER_GPT (MPC5XXX_GPT + 0x60) /* GPT6 */
371static void buzzer_turn_on(unsigned int freq)
372{
373 volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT);
374
375 const u32 prescale = gd->ipb_clk / freq / 128;
376 const u32 count = 128;
377 const u32 width = 64;
378
379 gpt->cir = (prescale << 16) | count;
380 gpt->pwmcr = width << 16;
381 gpt->emsr = 3; /* Timer enabled for PWM */
382}
383
384static void buzzer_turn_off(void)
385{
386 volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT);
387
388 gpt->emsr = 0;
389}
390
391static int do_inkadiag_buzzer(cmd_tbl_t *cmdtp, int flag, int argc,
392 char *argv[]) {
393
394 unsigned int period, freq;
395 int prev, i;
396
397 if (argc != 3) {
398 cmd_usage(cmdtp);
399 return 1;
400 }
401
402 argc--;
403 argv++;
404
405 period = simple_strtol(argv[0], NULL, 0);
406 if (!period)
407 printf("Zero period is senseless\n");
408 argc--;
409 argv++;
410
411 freq = simple_strtol(argv[0], NULL, 0);
412 /* avoid zero prescale in buzzer_turn_on() */
413 if (freq > gd->ipb_clk / 128) {
414 printf("%dHz exceeds maximum (%ldHz)\n", freq,
415 gd->ipb_clk / 128);
416 } else if (!freq)
417 printf("Zero frequency is senseless\n");
418 else
419 buzzer_turn_on(freq);
420
421 clear_ctrlc();
422 prev = disable_ctrlc(0);
423
424 printf("Buzzing for %d ms. Type ^C to abort!\n\n", period);
425
426 i = 0;
427 while (!ctrlc() && (i++ < CONFIG_SYS_HZ))
428 udelay(period);
429
430 clear_ctrlc();
431 disable_ctrlc(prev);
432
433 buzzer_turn_off();
434
435 return 0;
436}
437
438static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
439
440cmd_tbl_t cmd_inkadiag_sub[] = {
441 U_BOOT_CMD_MKENT(io, 1, 1, do_inkadiag_io, "read digital input",
Wolfgang Denka89c33d2009-05-24 17:06:54 +0200442 "<drawer1|drawer2|other> [value] - get or set specified signal"),
Detlev Zundel7b5611c2009-03-30 00:31:34 +0200443 U_BOOT_CMD_MKENT(serial, 4, 1, do_inkadiag_serial, "test serial port",
444 "<num> <mode> <baudrate> <msg> - test uart num [0..11] in mode\n"
Wolfgang Denka89c33d2009-05-24 17:06:54 +0200445 "and baudrate with msg"),
Detlev Zundel7b5611c2009-03-30 00:31:34 +0200446 U_BOOT_CMD_MKENT(buzzer, 2, 1, do_inkadiag_buzzer, "activate buzzer",
Wolfgang Denka89c33d2009-05-24 17:06:54 +0200447 "<period> <freq> - turn buzzer on for period ms with freq hz"),
Detlev Zundel7b5611c2009-03-30 00:31:34 +0200448 U_BOOT_CMD_MKENT(help, 4, 1, do_inkadiag_help, "get help",
Wolfgang Denka89c33d2009-05-24 17:06:54 +0200449 "[command] - get help for command"),
Detlev Zundel7b5611c2009-03-30 00:31:34 +0200450};
451
452static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag,
453 int argc, char *argv[]) {
454 extern int _do_help (cmd_tbl_t *cmd_start, int cmd_items,
455 cmd_tbl_t *cmdtp, int flag,
456 int argc, char *argv[]);
457 /* do_help prints command name - we prepend inkadiag to our subcommands! */
458#ifdef CONFIG_SYS_LONGHELP
459 puts ("inkadiag ");
460#endif
461 return _do_help(&cmd_inkadiag_sub[0],
462 ARRAY_SIZE(cmd_inkadiag_sub), cmdtp, flag, argc, argv);
463}
464
465static int do_inkadiag(cmd_tbl_t *cmdtp, int flag, int argc,
466 char *argv[]) {
467 cmd_tbl_t *c;
468
469 c = find_cmd_tbl(argv[1], &cmd_inkadiag_sub[0], ARRAY_SIZE(cmd_inkadiag_sub));
470
471 if (c) {
472 argc--;
473 argv++;
474 return c->cmd(c, flag, argc, argv);
475 } else {
476 /* Unrecognized command */
477 cmd_usage(cmdtp);
478 return 1;
479 }
480}
481
482U_BOOT_CMD(inkadiag, 6, 1, do_inkadiag,
483 "inkadiag - inka diagnosis\n",
484 "[inkadiag what ...]\n"
485 " - perform a diagnosis on inka hardware\n"
Wolfgang Denka89c33d2009-05-24 17:06:54 +0200486 "'inkadiag' performs hardware tests.");