blob: 0e9d3d24dd89721998a9fa7355499b4cc7c26b16 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
wdenk1cb8e982003-03-06 21:55:29 +00002/*
3 * (C) Copyright 2001, 2002, 2003
4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * Keith Outwater, keith_outwater@mvis.com`
6 * Steven Scholz, steven.scholz@imc-berlin.de
wdenk1cb8e982003-03-06 21:55:29 +00007 */
8
9/*
10 * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim)
Markus Niebel412921d2014-07-21 11:06:16 +020011 * DS1307 and DS1338/9 Real Time Clock (RTC).
wdenk1cb8e982003-03-06 21:55:29 +000012 *
13 * based on ds1337.c
14 */
15
16#include <common.h>
17#include <command.h>
Chris Packhamd425d602017-04-29 15:20:29 +120018#include <dm.h>
Simon Glassf7ae49f2020-05-10 11:40:05 -060019#include <log.h>
wdenk1cb8e982003-03-06 21:55:29 +000020#include <rtc.h>
21#include <i2c.h>
22
Chris Packhamd425d602017-04-29 15:20:29 +120023enum ds_type {
24 ds_1307,
25 ds_1337,
Chris Packhamf65774e2021-03-03 14:09:44 +130026 ds_1339,
Chris Packhamd425d602017-04-29 15:20:29 +120027 ds_1340,
Heiko Schocher8dd68032019-05-27 08:13:41 +020028 m41t11,
Chris Packhamd425d602017-04-29 15:20:29 +120029 mcp794xx,
30};
wdenk1cb8e982003-03-06 21:55:29 +000031
32/*
33 * RTC register addresses
34 */
35#define RTC_SEC_REG_ADDR 0x00
36#define RTC_MIN_REG_ADDR 0x01
37#define RTC_HR_REG_ADDR 0x02
38#define RTC_DAY_REG_ADDR 0x03
39#define RTC_DATE_REG_ADDR 0x04
40#define RTC_MON_REG_ADDR 0x05
41#define RTC_YR_REG_ADDR 0x06
42#define RTC_CTL_REG_ADDR 0x07
43
Mark Tomlinson07c65242021-09-28 10:10:42 +130044#define DS1337_CTL_REG_ADDR 0x0e
45#define DS1337_STAT_REG_ADDR 0x0f
46#define DS1340_STAT_REG_ADDR 0x09
47
48#define RTC_STAT_BIT_OSF 0x80
49
wdenk1cb8e982003-03-06 21:55:29 +000050#define RTC_SEC_BIT_CH 0x80 /* Clock Halt (in Register 0) */
51
Callum Sinclair223c4492021-08-10 14:51:15 +120052/* DS1307-specific bits */
wdenk1cb8e982003-03-06 21:55:29 +000053#define RTC_CTL_BIT_RS0 0x01 /* Rate select 0 */
54#define RTC_CTL_BIT_RS1 0x02 /* Rate select 1 */
55#define RTC_CTL_BIT_SQWE 0x10 /* Square Wave Enable */
56#define RTC_CTL_BIT_OUT 0x80 /* Output Control */
57
Callum Sinclair223c4492021-08-10 14:51:15 +120058/* DS1337-specific bits */
59#define DS1337_CTL_BIT_RS1 0x08 /* Rate select 1 */
60#define DS1337_CTL_BIT_RS2 0x10 /* Rate select 2 */
61#define DS1337_CTL_BIT_EOSC 0x80 /* Enable Oscillator */
62
63/* DS1340-specific bits */
64#define DS1340_SEC_BIT_EOSC 0x80 /* Enable Oscillator */
65#define DS1340_CTL_BIT_OUT 0x80 /* Output Control */
66
Andy Flemingc79e1c12015-10-21 18:59:06 -050067/* MCP7941X-specific bits */
68#define MCP7941X_BIT_ST 0x80
69#define MCP7941X_BIT_VBATEN 0x08
70
Chris Packhamd425d602017-04-29 15:20:29 +120071#ifndef CONFIG_DM_RTC
72
Chris Packhamd425d602017-04-29 15:20:29 +120073/*---------------------------------------------------------------------*/
74#undef DEBUG_RTC
75
76#ifdef DEBUG_RTC
77#define DEBUGR(fmt, args...) printf(fmt, ##args)
78#else
79#define DEBUGR(fmt, args...)
80#endif
81/*---------------------------------------------------------------------*/
82
Tom Rini65cc0e22022-11-16 13:10:41 -050083#ifndef CFG_SYS_I2C_RTC_ADDR
84# define CFG_SYS_I2C_RTC_ADDR 0x68
Chris Packhamd425d602017-04-29 15:20:29 +120085#endif
86
87#if defined(CONFIG_RTC_DS1307) && (CONFIG_SYS_I2C_SPEED > 100000)
88# error The DS1307 is specified only up to 100kHz!
89#endif
90
wdenk1cb8e982003-03-06 21:55:29 +000091static uchar rtc_read (uchar reg);
92static void rtc_write (uchar reg, uchar val);
wdenk1cb8e982003-03-06 21:55:29 +000093
94/*
95 * Get the current time from the RTC
96 */
Yuri Tikhonovb73a19e2008-03-20 17:56:04 +030097int rtc_get (struct rtc_time *tmp)
wdenk1cb8e982003-03-06 21:55:29 +000098{
Yuri Tikhonovb73a19e2008-03-20 17:56:04 +030099 int rel = 0;
wdenk1cb8e982003-03-06 21:55:29 +0000100 uchar sec, min, hour, mday, wday, mon, year;
101
Andy Flemingc79e1c12015-10-21 18:59:06 -0500102#ifdef CONFIG_RTC_MCP79411
103read_rtc:
104#endif
wdenk1cb8e982003-03-06 21:55:29 +0000105 sec = rtc_read (RTC_SEC_REG_ADDR);
106 min = rtc_read (RTC_MIN_REG_ADDR);
107 hour = rtc_read (RTC_HR_REG_ADDR);
108 wday = rtc_read (RTC_DAY_REG_ADDR);
109 mday = rtc_read (RTC_DATE_REG_ADDR);
110 mon = rtc_read (RTC_MON_REG_ADDR);
111 year = rtc_read (RTC_YR_REG_ADDR);
112
113 DEBUGR ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
114 "hr: %02x min: %02x sec: %02x\n",
115 year, mon, mday, wday, hour, min, sec);
116
Andy Flemingc79e1c12015-10-21 18:59:06 -0500117#ifdef CONFIG_RTC_DS1307
wdenk1cb8e982003-03-06 21:55:29 +0000118 if (sec & RTC_SEC_BIT_CH) {
119 printf ("### Warning: RTC oscillator has stopped\n");
120 /* clear the CH flag */
121 rtc_write (RTC_SEC_REG_ADDR,
122 rtc_read (RTC_SEC_REG_ADDR) & ~RTC_SEC_BIT_CH);
Yuri Tikhonovb73a19e2008-03-20 17:56:04 +0300123 rel = -1;
wdenk1cb8e982003-03-06 21:55:29 +0000124 }
Andy Flemingc79e1c12015-10-21 18:59:06 -0500125#endif
126
127#ifdef CONFIG_RTC_MCP79411
128 /* make sure that the backup battery is enabled */
129 if (!(wday & MCP7941X_BIT_VBATEN)) {
130 rtc_write(RTC_DAY_REG_ADDR,
131 wday | MCP7941X_BIT_VBATEN);
132 }
133
134 /* clock halted? turn it on, so clock can tick. */
135 if (!(sec & MCP7941X_BIT_ST)) {
136 rtc_write(RTC_SEC_REG_ADDR, MCP7941X_BIT_ST);
137 printf("Started RTC\n");
138 goto read_rtc;
139 }
140#endif
141
wdenk8bde7f72003-06-27 21:31:46 +0000142
wdenk1cb8e982003-03-06 21:55:29 +0000143 tmp->tm_sec = bcd2bin (sec & 0x7F);
144 tmp->tm_min = bcd2bin (min & 0x7F);
145 tmp->tm_hour = bcd2bin (hour & 0x3F);
146 tmp->tm_mday = bcd2bin (mday & 0x3F);
147 tmp->tm_mon = bcd2bin (mon & 0x1F);
148 tmp->tm_year = bcd2bin (year) + ( bcd2bin (year) >= 70 ? 1900 : 2000);
149 tmp->tm_wday = bcd2bin ((wday - 1) & 0x07);
150 tmp->tm_yday = 0;
151 tmp->tm_isdst= 0;
152
153 DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
154 tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
155 tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
Yuri Tikhonovb73a19e2008-03-20 17:56:04 +0300156
157 return rel;
wdenk1cb8e982003-03-06 21:55:29 +0000158}
159
160
161/*
162 * Set the RTC
163 */
Jean-Christophe PLAGNIOL-VILLARDd1e23192008-09-01 23:06:23 +0200164int rtc_set (struct rtc_time *tmp)
wdenk1cb8e982003-03-06 21:55:29 +0000165{
166 DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
167 tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
168 tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
169
170 if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
171 printf("WARNING: year should be between 1970 and 2069!\n");
wdenk8bde7f72003-06-27 21:31:46 +0000172
wdenk1cb8e982003-03-06 21:55:29 +0000173 rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
174 rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon));
Andy Flemingc79e1c12015-10-21 18:59:06 -0500175#ifdef CONFIG_RTC_MCP79411
176 rtc_write (RTC_DAY_REG_ADDR,
177 bin2bcd (tmp->tm_wday + 1) | MCP7941X_BIT_VBATEN);
178#else
wdenk1cb8e982003-03-06 21:55:29 +0000179 rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1));
Andy Flemingc79e1c12015-10-21 18:59:06 -0500180#endif
wdenk1cb8e982003-03-06 21:55:29 +0000181 rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
182 rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
183 rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
Andy Flemingc79e1c12015-10-21 18:59:06 -0500184#ifdef CONFIG_RTC_MCP79411
185 rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec) | MCP7941X_BIT_ST);
186#else
wdenk1cb8e982003-03-06 21:55:29 +0000187 rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
Andy Flemingc79e1c12015-10-21 18:59:06 -0500188#endif
Jean-Christophe PLAGNIOL-VILLARDd1e23192008-09-01 23:06:23 +0200189
190 return 0;
wdenk1cb8e982003-03-06 21:55:29 +0000191}
192
193
194/*
wdenk8bde7f72003-06-27 21:31:46 +0000195 * Reset the RTC. We setting the date back to 1970-01-01.
196 * We also enable the oscillator output on the SQW/OUT pin and program
wdenk1cb8e982003-03-06 21:55:29 +0000197 * it for 32,768 Hz output. Note that according to the datasheet, turning
198 * on the square wave output increases the current drain on the backup
199 * battery to something between 480nA and 800nA.
200 */
201void rtc_reset (void)
202{
wdenk1cb8e982003-03-06 21:55:29 +0000203 rtc_write (RTC_SEC_REG_ADDR, 0x00); /* clearing Clock Halt */
204 rtc_write (RTC_CTL_REG_ADDR, RTC_CTL_BIT_SQWE | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS0);
wdenk1cb8e982003-03-06 21:55:29 +0000205}
206
207
208/*
209 * Helper functions
210 */
211
212static
213uchar rtc_read (uchar reg)
214{
Tom Rini65cc0e22022-11-16 13:10:41 -0500215 return (i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg));
wdenk1cb8e982003-03-06 21:55:29 +0000216}
217
218
219static void rtc_write (uchar reg, uchar val)
220{
Tom Rini65cc0e22022-11-16 13:10:41 -0500221 i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val);
wdenk1cb8e982003-03-06 21:55:29 +0000222}
Chris Packhamd425d602017-04-29 15:20:29 +1200223
Chris Packhamd425d602017-04-29 15:20:29 +1200224#endif /* !CONFIG_DM_RTC */
225
226#ifdef CONFIG_DM_RTC
227static int ds1307_rtc_set(struct udevice *dev, const struct rtc_time *tm)
228{
229 int ret;
230 uchar buf[7];
231 enum ds_type type = dev_get_driver_data(dev);
232
233 debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
234 tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
235 tm->tm_hour, tm->tm_min, tm->tm_sec);
236
237 if (tm->tm_year < 1970 || tm->tm_year > 2069)
238 printf("WARNING: year should be between 1970 and 2069!\n");
239
240 buf[RTC_YR_REG_ADDR] = bin2bcd(tm->tm_year % 100);
241 buf[RTC_MON_REG_ADDR] = bin2bcd(tm->tm_mon);
242 buf[RTC_DAY_REG_ADDR] = bin2bcd(tm->tm_wday + 1);
243 buf[RTC_DATE_REG_ADDR] = bin2bcd(tm->tm_mday);
244 buf[RTC_HR_REG_ADDR] = bin2bcd(tm->tm_hour);
245 buf[RTC_MIN_REG_ADDR] = bin2bcd(tm->tm_min);
246 buf[RTC_SEC_REG_ADDR] = bin2bcd(tm->tm_sec);
247
248 if (type == mcp794xx) {
249 buf[RTC_DAY_REG_ADDR] |= MCP7941X_BIT_VBATEN;
250 buf[RTC_SEC_REG_ADDR] |= MCP7941X_BIT_ST;
251 }
252
253 ret = dm_i2c_write(dev, 0, buf, sizeof(buf));
254 if (ret < 0)
255 return ret;
256
Mark Tomlinson07c65242021-09-28 10:10:42 +1300257 if (type == ds_1337) {
258 /* Ensure oscillator is enabled */
259 dm_i2c_reg_write(dev, DS1337_CTL_REG_ADDR, 0);
260 }
261
Chris Packhamd425d602017-04-29 15:20:29 +1200262 return 0;
263}
264
265static int ds1307_rtc_get(struct udevice *dev, struct rtc_time *tm)
266{
267 int ret;
268 uchar buf[7];
269 enum ds_type type = dev_get_driver_data(dev);
270
Chris Packhamd425d602017-04-29 15:20:29 +1200271 ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
272 if (ret < 0)
273 return ret;
274
Mark Tomlinson07c65242021-09-28 10:10:42 +1300275 if (type == ds_1337 || type == ds_1340) {
276 uint reg = (type == ds_1337) ? DS1337_STAT_REG_ADDR :
277 DS1340_STAT_REG_ADDR;
278 int status = dm_i2c_reg_read(dev, reg);
Chris Packhamd425d602017-04-29 15:20:29 +1200279
Mark Tomlinson07c65242021-09-28 10:10:42 +1300280 if (status >= 0 && (status & RTC_STAT_BIT_OSF)) {
281 printf("### Warning: RTC oscillator has stopped\n");
282 /* clear the OSF flag */
283 dm_i2c_reg_write(dev, reg, status & ~RTC_STAT_BIT_OSF);
Chris Packhamd425d602017-04-29 15:20:29 +1200284 }
285 }
286
287 tm->tm_sec = bcd2bin(buf[RTC_SEC_REG_ADDR] & 0x7F);
288 tm->tm_min = bcd2bin(buf[RTC_MIN_REG_ADDR] & 0x7F);
289 tm->tm_hour = bcd2bin(buf[RTC_HR_REG_ADDR] & 0x3F);
290 tm->tm_mday = bcd2bin(buf[RTC_DATE_REG_ADDR] & 0x3F);
291 tm->tm_mon = bcd2bin(buf[RTC_MON_REG_ADDR] & 0x1F);
292 tm->tm_year = bcd2bin(buf[RTC_YR_REG_ADDR]) +
293 (bcd2bin(buf[RTC_YR_REG_ADDR]) >= 70 ?
294 1900 : 2000);
295 tm->tm_wday = bcd2bin((buf[RTC_DAY_REG_ADDR] - 1) & 0x07);
296 tm->tm_yday = 0;
297 tm->tm_isdst = 0;
298
299 debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
300 tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
301 tm->tm_hour, tm->tm_min, tm->tm_sec);
302
303 return 0;
304}
305
306static int ds1307_rtc_reset(struct udevice *dev)
307{
308 int ret;
Callum Sinclair223c4492021-08-10 14:51:15 +1200309 enum ds_type type = dev_get_driver_data(dev);
Chris Packhamd425d602017-04-29 15:20:29 +1200310
Callum Sinclair223c4492021-08-10 14:51:15 +1200311 /*
312 * reset clock/oscillator in the seconds register:
313 * on DS1307 bit 7 enables Clock Halt (CH),
314 * on DS1340 bit 7 disables the oscillator (not EOSC)
315 * on MCP794xx bit 7 enables Start Oscillator (ST)
316 */
Chris Packhamd425d602017-04-29 15:20:29 +1200317 ret = dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR, 0x00);
318 if (ret < 0)
319 return ret;
Chris Packhamd425d602017-04-29 15:20:29 +1200320
Callum Sinclair223c4492021-08-10 14:51:15 +1200321 if (type == ds_1307) {
322 /* Write control register in order to enable square-wave
323 * output (SQWE) and set a default rate of 32.768kHz (RS1|RS0).
324 */
325 ret = dm_i2c_reg_write(dev, RTC_CTL_REG_ADDR,
326 RTC_CTL_BIT_SQWE | RTC_CTL_BIT_RS1 |
327 RTC_CTL_BIT_RS0);
328 } else if (type == ds_1337) {
329 /* Write control register in order to enable oscillator output
330 * (not EOSC) and set a default rate of 32.768kHz (RS2|RS1).
331 */
Mark Tomlinson07c65242021-09-28 10:10:42 +1300332 ret = dm_i2c_reg_write(dev, DS1337_CTL_REG_ADDR,
Callum Sinclair223c4492021-08-10 14:51:15 +1200333 DS1337_CTL_BIT_RS2 | DS1337_CTL_BIT_RS1);
334 } else if (type == ds_1340 || type == mcp794xx || type == m41t11) {
335 /* Reset clock calibration, frequency test and output level. */
336 ret = dm_i2c_reg_write(dev, RTC_CTL_REG_ADDR, 0x00);
337 }
338
339 return ret;
Chris Packhamd425d602017-04-29 15:20:29 +1200340}
341
342static int ds1307_probe(struct udevice *dev)
343{
344 i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS |
345 DM_I2C_CHIP_WR_ADDRESS);
346
347 return 0;
348}
349
350static const struct rtc_ops ds1307_rtc_ops = {
351 .get = ds1307_rtc_get,
352 .set = ds1307_rtc_set,
353 .reset = ds1307_rtc_reset,
354};
355
356static const struct udevice_id ds1307_rtc_ids[] = {
357 { .compatible = "dallas,ds1307", .data = ds_1307 },
358 { .compatible = "dallas,ds1337", .data = ds_1337 },
Chris Packhamf65774e2021-03-03 14:09:44 +1300359 { .compatible = "dallas,ds1339", .data = ds_1339 },
Chris Packhamd425d602017-04-29 15:20:29 +1200360 { .compatible = "dallas,ds1340", .data = ds_1340 },
Pali Rohár48c144f2022-02-14 11:34:22 +0100361 { .compatible = "microchip,mcp7940x", .data = mcp794xx },
Chris Packhamd425d602017-04-29 15:20:29 +1200362 { .compatible = "microchip,mcp7941x", .data = mcp794xx },
Heiko Schocher8dd68032019-05-27 08:13:41 +0200363 { .compatible = "st,m41t11", .data = m41t11 },
Chris Packhamd425d602017-04-29 15:20:29 +1200364 { }
365};
366
367U_BOOT_DRIVER(rtc_ds1307) = {
368 .name = "rtc-ds1307",
369 .id = UCLASS_RTC,
370 .probe = ds1307_probe,
371 .of_match = ds1307_rtc_ids,
372 .ops = &ds1307_rtc_ops,
373};
374#endif /* CONFIG_DM_RTC */