blob: 31d6eeec0cef7beb3fcd60d2052b0aa16155b4d8 [file] [log] [blame]
Mike Frysinger76d21802008-10-12 05:05:42 -04001/*
Bin Menga1875592016-02-05 19:30:11 -08002 * U-Boot - main board file
Mike Frysinger76d21802008-10-12 05:05:42 -04003 *
4 * Copyright (c) 2005-2008 Analog Devices Inc.
5 *
6 * Licensed under the GPL-2 or later.
7 */
8
9#include <common.h>
10#include <config.h>
11#include <command.h>
Mike Frysingerd1f49b42010-06-02 19:29:47 -040012#include <netdev.h>
Mike Frysinger76d21802008-10-12 05:05:42 -040013#include <asm/blackfin.h>
Mike Frysingerd1f49b42010-06-02 19:29:47 -040014#include <asm/gpio.h>
15#include <asm/portmux.h>
Cliff Caie54c8202009-11-20 08:24:43 +000016#include <asm/sdh.h>
Mike Frysinger76d21802008-10-12 05:05:42 -040017
18DECLARE_GLOBAL_DATA_PTR;
19
20int checkboard(void)
21{
22 printf("Board: ADI BF548 EZ-Kit board\n");
23 printf(" Support: http://blackfin.uclinux.org/\n");
24 return 0;
25}
26
Mike Frysinger76d21802008-10-12 05:05:42 -040027int board_early_init_f(void)
28{
Mike Frysingerd1f49b42010-06-02 19:29:47 -040029 /* Set async addr lines as peripheral */
30 const unsigned short pins[] = {
31 P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
32 P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20,
33 P_A21, P_A22, P_A23, P_A24, 0
34 };
35 return peripheral_request_list(pins, "async");
Mike Frysinger76d21802008-10-12 05:05:42 -040036}
Ben Warren736fead2009-07-20 22:01:11 -070037
38#ifdef CONFIG_SMC911X
39int board_eth_init(bd_t *bis)
40{
41 return smc911x_initialize(0, CONFIG_SMC911X_BASE);
42}
43#endif
Cliff Caie54c8202009-11-20 08:24:43 +000044
45#ifdef CONFIG_BFIN_SDH
46int board_mmc_init(bd_t *bis)
47{
48 return bfin_mmc_init(bis);
49}
50#endif
Cliff Cai9442c4a2009-12-08 07:25:57 +000051
52#ifdef CONFIG_USB_BLACKFIN
53void board_musb_init(void)
54{
55 /*
56 * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both device
57 * and OTG host modes, while rev 1.1 and greater require PE7 to
58 * be low for device mode and high for host mode. We set it high
59 * here because we are in host mode.
60 */
Mike Frysingerd1f49b42010-06-02 19:29:47 -040061 gpio_request(GPIO_PE7, "musb-vbus");
62 gpio_direction_output(GPIO_PE7, 1);
Cliff Cai9442c4a2009-12-08 07:25:57 +000063}
64#endif