blob: 661c21d9bdbd5a3ca39bbca7b9cebabc08632a36 [file] [log] [blame]
Hans de Goede80e5f832016-03-14 17:37:09 +01001/*
2 * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun7i-a20.dtsi"
45#include "sunxi-itead-core-common.dtsi"
46
47/ {
48 model = "Itead Ibox A20";
49 compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
50
51 leds {
52 compatible = "gpio-leds";
53 pinctrl-names = "default";
54 pinctrl-0 = <&led_pins_itead_core>;
55
56 green {
57 label = "itead_core:green:usr";
58 gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
59 default-state = "on";
60 };
61
62 blue {
63 label = "itead_core:blue:usr";
64 gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
65 default-state = "on";
66 };
67 };
68};
69
70&ahci {
71 target-supply = <&reg_ahci_5v>;
72 status = "okay";
73};
74
75&codec {
76 status = "okay";
77};
78
79&gmac {
80 pinctrl-names = "default";
81 pinctrl-0 = <&gmac_pins_mii_a>;
82 phy = <&phy1>;
83 phy-mode = "mii";
84 status = "okay";
85
86 phy1: ethernet-phy@1 {
87 reg = <1>;
88 };
89};
90
91&i2c0 {
92 axp209: pmic@34 {
93 interrupt-parent = <&nmi_intc>;
94 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
95 };
96};
97
98&ir0 {
99 pinctrl-names = "default";
100 pinctrl-0 = <&ir0_rx_pins_a>;
101 status = "okay";
102};
103
104&mmc0 {
105 pinctrl-names = "default";
106 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
107 vmmc-supply = <&reg_vcc3v3>;
108 bus-width = <4>;
109 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
110 cd-inverted;
111 status = "okay";
112};
113
114&pio {
115 led_pins_itead_core: led_pins@0 {
116 allwinner,pins = "PH20","PH21";
117 allwinner,function = "gpio_out";
118 allwinner,drive = <SUN4I_PINCTRL_20_MA>;
119 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
120 };
121};
122
123&reg_ahci_5v {
124 status = "okay";
125};