blob: 85614223f086d4cdec7f503c2c6324846e445d9d [file] [log] [blame]
wdenk1df49e22002-09-17 21:37:55 +00001/*
2 * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
3 * Andreas Heppel <aheppel@sysgo.de>
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * Initialisation of the PCI-to-ISA bridge and disabling the BIOS
26 * write protection (for flash) in function 0 of the chip.
27 * Enabling function 1 (IDE controller of the chip.
28 */
29
30#include <common.h>
31#include <config.h>
32
wdenk1df49e22002-09-17 21:37:55 +000033#include <asm/io.h>
34#include <pci.h>
35
36#include <w83c553f.h>
37
38#define out8(addr,val) do { \
39 out_8((u8*) (addr),(val)); udelay(1); \
40 } while (0)
41#define out16(addr,val) do { \
42 out_be16((u16*) (addr),(val)); udelay(1); \
43 } while (0)
44
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020045extern uint ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
wdenk1df49e22002-09-17 21:37:55 +000046
47void initialise_pic(void);
48void initialise_dma(void);
49
50void initialise_w83c553f(void)
51{
52 pci_dev_t devbusfn;
53 unsigned char reg8;
54 unsigned short reg16;
55 unsigned int reg32;
56
57 devbusfn = pci_find_device(W83C553F_VID, W83C553F_DID, 0);
58 if (devbusfn == -1)
59 {
60 printf("Error: Cannot find W83C553F controller on any PCI bus.");
61 return;
62 }
63
64 pci_read_config_word(devbusfn, PCI_COMMAND, &reg16);
65 reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
66 pci_write_config_word(devbusfn, PCI_COMMAND, reg16);
67
68 pci_read_config_byte(devbusfn, WINBOND_IPADCR, &reg8);
69 /* 16 MB ISA memory space */
70 reg8 |= (IPADCR_IPATOM4 | IPADCR_IPATOM5 | IPADCR_IPATOM6 | IPADCR_IPATOM7);
71 reg8 &= ~IPADCR_MBE512;
72 pci_write_config_byte(devbusfn, WINBOND_IPADCR, reg8);
73
74 pci_read_config_byte(devbusfn, WINBOND_CSCR, &reg8);
75 /* switch off BIOS write protection */
76 reg8 |= CSCR_UBIOSCSE;
77 reg8 &= ~CSCR_BIOSWP;
78 pci_write_config_byte(devbusfn, WINBOND_CSCR, reg8);
79
80 /*
81 * Interrupt routing:
82 * - IDE -> IRQ 9/0
83 * - INTA -> IRQ 10
84 * - INTB -> IRQ 11
85 * - INTC -> IRQ 14
86 * - INTD -> IRQ 15
87 */
88 pci_write_config_byte(devbusfn, WINBOND_IDEIRCR, 0x90);
89 pci_write_config_word(devbusfn, WINBOND_PCIIRCR, 0xABEF);
90
91 /*
92 * Read IDE bus offsets from function 1 device.
93 * We must unmask the LSB indicating that ist is an IO address.
94 */
95 devbusfn |= PCI_BDF(0,0,1);
96
97 /*
98 * Switch off legacy IRQ for IDE and IDE port 1.
99 */
100 pci_write_config_byte(devbusfn, 0x09, 0x8F);
101
102 pci_read_config_dword(devbusfn, WINDOND_IDECSR, &reg32);
103 reg32 &= ~(IDECSR_LEGIRQ | IDECSR_P1EN | IDECSR_P1F16);
104 pci_write_config_dword(devbusfn, WINDOND_IDECSR, reg32);
105
106 pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &ide_bus_offset[0]);
107 ide_bus_offset[0] &= ~1;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200108#if CONFIG_SYS_IDE_MAXBUS > 1
wdenk1df49e22002-09-17 21:37:55 +0000109 pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, &ide_bus_offset[1]);
110 ide_bus_offset[1] &= ~1;
111#endif
112
113 /*
114 * Enable function 1, IDE -> busmastering and IO space access
115 */
116 pci_read_config_word(devbusfn, PCI_COMMAND, &reg16);
117 reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO;
118 pci_write_config_word(devbusfn, PCI_COMMAND, reg16);
119
120 /*
121 * Initialise ISA interrupt controller
122 */
123 initialise_pic();
124
125 /*
126 * Initialise DMA controller
127 */
128 initialise_dma();
129}
130
131void initialise_pic(void)
132{
133 out8(W83C553F_PIC1_ICW1, 0x11);
134 out8(W83C553F_PIC1_ICW2, 0x08);
135 out8(W83C553F_PIC1_ICW3, 0x04);
136 out8(W83C553F_PIC1_ICW4, 0x01);
137 out8(W83C553F_PIC1_OCW1, 0xfb);
138 out8(W83C553F_PIC1_ELC, 0x20);
139
140 out8(W83C553F_PIC2_ICW1, 0x11);
141 out8(W83C553F_PIC2_ICW2, 0x08);
142 out8(W83C553F_PIC2_ICW3, 0x02);
143 out8(W83C553F_PIC2_ICW4, 0x01);
144 out8(W83C553F_PIC2_OCW1, 0xff);
145 out8(W83C553F_PIC2_ELC, 0xce);
146
147 out8(W83C553F_TMR1_CMOD, 0x74);
148
149 out8(W83C553F_PIC2_OCW1, 0x20);
150 out8(W83C553F_PIC1_OCW1, 0x20);
151
152 out8(W83C553F_PIC2_OCW1, 0x2b);
153 out8(W83C553F_PIC1_OCW1, 0x2b);
154}
155
156void initialise_dma(void)
157{
158 unsigned int channel;
159 unsigned int rvalue1, rvalue2;
160
161 /* perform a H/W reset of the devices */
162
163 out8(W83C553F_DMA1 + W83C553F_DMA1_MC, 0x00);
164 out16(W83C553F_DMA2 + W83C553F_DMA2_MC, 0x0000);
165
166 /* initialise all channels to a sane state */
167
168 for (channel = 0; channel < 4; channel++) {
169 /*
170 * dependent upon the channel, setup the specifics:
171 *
172 * demand
173 * address-increment
174 * autoinitialize-disable
175 * verify-transfer
176 */
177
178 switch (channel) {
179 case 0:
180 rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH0SEL|W83C553F_MODE_TT_VERIFY);
181 rvalue2 = (W83C553F_MODE_TM_CASCADE|W83C553F_MODE_CH0SEL);
182 break;
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200183 case 1:
wdenk1df49e22002-09-17 21:37:55 +0000184 rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY);
185 rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY);
186 break;
187 case 2:
188 rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY);
189 rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY);
190 break;
191 case 3:
192 rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY);
193 rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY);
194 break;
195 default:
196 rvalue1 = 0x00;
197 rvalue2 = 0x00;
198 break;
199 }
200
201 /* write to write mode registers */
202
203 out8(W83C553F_DMA1 + W83C553F_DMA1_WM, rvalue1 & 0xFF);
204 out16(W83C553F_DMA2 + W83C553F_DMA2_WM, rvalue2 & 0x00FF);
205 }
206
207 /* enable all channels */
208
209 out8(W83C553F_DMA1 + W83C553F_DMA1_CM, 0x00);
210 out16(W83C553F_DMA2 + W83C553F_DMA2_CM, 0x0000);
211 /*
212 * initialize the global DMA configuration
213 *
214 * DACK# active low
215 * DREQ active high
216 * fixed priority
217 * channel group enable
218 */
219
220 out8(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00);
221 out16(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000);
222}