Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 81c772521ff26054a3fe75efa87d8daeae83e9b4 / . / drivers / net / Kconfig
blob: c1cb689ccf337338d0e5d76e473313102c56bddf [file] [log] [blame]
Joe Hershberger05c3e682015-03-22 17:09:10 -0500[diff] [blame]1config DM_ETH
2 bool "Enable Driver Model for Ethernet drivers"
3 depends on DM
4 help
5 Enable driver model for Ethernet.
6
7 The eth_*() interface will be implemented by the UC_ETH class
8 This is currently implemented in net/eth.c
9 Look in include/net.h for details.
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500[diff] [blame]10
Bin Mengb68fe152015-08-27 22:25:58 -0700[diff] [blame]11config PHYLIB
12 bool "Ethernet PHY (physical media interface) support"
13 help
14 Enable Ethernet PHY (physical media interface) support.
15
Michael Haas525d1872016-03-25 18:22:50 +0100[diff] [blame]16config RTL8211X_PHY_FORCE_MASTER
17 bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode"
18 depends on PHYLIB
19 help
20 Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F).
21 This can work around link stability and data corruption issues on gigabit
22 links which can occur in slave mode on certain PHYs, e.g. on the
23 RTL8211C(L).
24
25 Please note that two directly connected devices (i.e. via crossover cable)
26 will not be able to establish a link between each other if they both force
27 master mode. Multiple devices forcing master mode when connected by a
28 network switch do not pose a problem as the switch configures its affected
29 ports into slave mode.
30
31 This option only affects gigabit links. If you must establish a direct
32 connection between two devices which both force master mode, try forcing
33 the link speed to 100MBit/s.
34
35 If unsure, say N.
36
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500[diff] [blame]37menuconfig NETDEVICES
38 bool "Network device support"
39 depends on NET
Joe Hershbergeref0f2f52015-06-22 16:15:30 -0500[diff] [blame]40 default y if DM_ETH
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500[diff] [blame]41 help
42 You must select Y to enable any network device support
43 Generally if you have any networking support this is a given
44
45 If unsure, say Y
46
47if NETDEVICES
48
Marek Vasute40095f2016-05-24 23:29:09 +0200[diff] [blame]49config AG7XXX
50 bool "Atheros AG7xxx Ethernet MAC support"
51 depends on DM_ETH && ARCH_ATH79
52 select PHYLIB
53 help
54 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
55 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
56
57
Thomas Chou96fa1e42015-10-22 15:29:11 +0800[diff] [blame]58config ALTERA_TSE
59 bool "Altera Triple-Speed Ethernet MAC support"
60 depends on DM_ETH
61 select PHYLIB
62 help
63 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
64 Please find details on the "Triple-Speed Ethernet MegaCore Function
65 Resource Center" of Altera.
66
Simon Glassc294ac52015-08-19 09:33:41 -0600[diff] [blame]67config E1000
68 bool "Intel PRO/1000 Gigabit Ethernet support"
69 help
70 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
71 adapters. For more information on how to identify your adapter, go
72 to the Adapter & Driver ID Guide at:
73
74 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
75
76config E1000_SPI_GENERIC
77 bool "Allow access to the Intel 8257x SPI bus"
78 depends on E1000
79 help
80 Allow generic access to the SPI bus on the Intel 8257x, for
81 example with the "sspi" command.
82
83config E1000_SPI
84 bool "Enable SPI bus utility code"
85 depends on E1000
86 help
87 Utility code for direct access to the SPI bus on Intel 8257x.
88 This does not do anything useful unless you set at least one
89 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
90
91config CMD_E1000
92 bool "Enable the e1000 command"
93 depends on E1000
94 help
95 This enables the 'e1000' management command for E1000 devices. When
96 used on devices with SPI support you can reprogram the EEPROM from
97 U-Boot.
98
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500[diff] [blame]99config ETH_SANDBOX
100 depends on DM_ETH && SANDBOX
101 default y
102 bool "Sandbox: Mocked Ethernet driver"
103 help
104 This driver simply responds with fake ARP replies and ping
105 replies that are used to verify network stack functionality
106
107 This driver is particularly useful in the test/dm/eth.c tests
108
Joe Hershbergera346ca72015-03-22 17:09:21 -0500[diff] [blame]109config ETH_SANDBOX_RAW
110 depends on DM_ETH && SANDBOX
111 default y
112 bool "Sandbox: Bridge to Linux Raw Sockets"
113 help
114 This driver is a bridge from the bottom of the network stack
115 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
116 network traffic to be tested from within sandbox. See
117 board/sandbox/README.sandbox for more details.
118
Simon Glassef48f6d2015-04-05 16:07:34 -0600[diff] [blame]119config ETH_DESIGNWARE
120 bool "Synopsys Designware Ethernet MAC"
Thomas Chou25af71c2015-12-07 20:53:29 +0800[diff] [blame]121 select PHYLIB
Simon Glassef48f6d2015-04-05 16:07:34 -0600[diff] [blame]122 help
123 This MAC is present in SoCs from various vendors. It supports
124 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
125 provide the PHY (physical media interface).
126
Stefan Roese99d4c6d2016-02-10 07:22:10 +0100[diff] [blame]127config MVPP2
128 bool "Marvell Armada 375 network interface support"
129 depends on ARMADA_375
130 select PHYLIB
131 help
132 This driver supports the network interface units in the
133 Marvell ARMADA 375 SoC.
134
Bin Mengb68fe152015-08-27 22:25:58 -0700[diff] [blame]135config PCH_GBE
136 bool "Intel Platform Controller Hub EG20T GMAC driver"
137 depends on DM_ETH && DM_PCI
138 select PHYLIB
139 help
140 This MAC is present in Intel Platform Controller Hub EG20T. It
141 supports 10/100/1000 Mbps operation.
142
Bin Meng86e9dc82016-03-21 06:47:41 -0700[diff] [blame]143config RTL8139
144 bool "Realtek 8139 series Ethernet controller driver"
145 help
146 This driver supports Realtek 8139 series fast ethernet family of
147 PCI chipsets/adapters.
148
Bin Meng0764f242016-03-21 06:47:42 -0700[diff] [blame]149config RTL8169
150 bool "Realtek 8169 series Ethernet controller driver"
151 help
152 This driver supports Realtek 8169 series gigabit ethernet family of
153 PCI/PCIe chipsets/adapters.
154
Michal Simek338a5f22015-12-09 16:54:42 +0100[diff] [blame]155config XILINX_AXIEMAC
156 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
157 select PHYLIB
158 select MII
159 bool "Xilinx AXI Ethernet"
160 help
161 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
162
Michal Simek3229c862015-12-11 09:41:49 +0100[diff] [blame]163config XILINX_EMACLITE
164 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
165 select PHYLIB
166 select MII
167 bool "Xilinx Ethernetlite"
168 help
169 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
170
Michal Simek596e5782015-11-30 14:34:52 +0100[diff] [blame]171config ZYNQ_GEM
172 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
Michal Simek7bccc752015-12-11 09:14:31 +0100[diff] [blame]173 select PHYLIB
Michal Simek596e5782015-11-30 14:34:52 +0100[diff] [blame]174 bool "Xilinx Ethernet GEM"
175 help
Michal Simekc9428102015-12-09 16:53:52 +0100[diff] [blame]176 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
Michal Simek596e5782015-11-30 14:34:52 +0100[diff] [blame]177
Purna Chandra Mandal23e75782016-01-28 15:30:21 +0530[diff] [blame]178config PIC32_ETH
179 bool "Microchip PIC32 Ethernet Support"
180 depends on DM_ETH && MACH_PIC32
181 select PHYLIB
182 help
183 This driver implements 10/100 Mbps Ethernet and MAC layer for
184 Microchip PIC32 microcontrollers.
185
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500[diff] [blame]186endif # NETDEVICES