blob: 5fe850019959984133f1729a0ae4b7767f973655 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0
Stefan Roese19fc2ea2014-10-22 12:13:14 +02002/*
3 * Driver for Marvell NETA network card for Armada XP and Armada 370 SoCs.
4 *
5 * U-Boot version:
Stefan Roesee3b9c982015-11-19 07:46:15 +01006 * Copyright (C) 2014-2015 Stefan Roese <sr@denx.de>
Stefan Roese19fc2ea2014-10-22 12:13:14 +02007 *
8 * Based on the Linux version which is:
9 * Copyright (C) 2012 Marvell
10 *
11 * Rami Rosen <rosenr@marvell.com>
12 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Stefan Roese19fc2ea2014-10-22 12:13:14 +020013 */
14
15#include <common.h>
Simon Glass1eb69ae2019-11-14 12:57:39 -070016#include <cpu_func.h>
Stefan Roesee3b9c982015-11-19 07:46:15 +010017#include <dm.h>
Stefan Roese19fc2ea2014-10-22 12:13:14 +020018#include <net.h>
19#include <netdev.h>
20#include <config.h>
21#include <malloc.h>
22#include <asm/io.h>
Masahiro Yamada1221ce42016-09-21 11:28:55 +090023#include <linux/errno.h>
Stefan Roese19fc2ea2014-10-22 12:13:14 +020024#include <phy.h>
25#include <miiphy.h>
26#include <watchdog.h>
27#include <asm/arch/cpu.h>
28#include <asm/arch/soc.h>
29#include <linux/compat.h>
30#include <linux/mbus.h>
Aditya Prayoga18bfc8f2018-12-05 00:39:23 +080031#include <asm-generic/gpio.h>
Stefan Roese19fc2ea2014-10-22 12:13:14 +020032
Stefan Roesee3b9c982015-11-19 07:46:15 +010033DECLARE_GLOBAL_DATA_PTR;
34
Stefan Roese19fc2ea2014-10-22 12:13:14 +020035#if !defined(CONFIG_PHYLIB)
36# error Marvell mvneta requires PHYLIB
37#endif
38
Stefan Roese19fc2ea2014-10-22 12:13:14 +020039#define CONFIG_NR_CPUS 1
Stefan Roese19fc2ea2014-10-22 12:13:14 +020040#define ETH_HLEN 14 /* Total octets in header */
41
42/* 2(HW hdr) 14(MAC hdr) 4(CRC) 32(extra for cache prefetch) */
43#define WRAP (2 + ETH_HLEN + 4 + 32)
44#define MTU 1500
45#define RX_BUFFER_SIZE (ALIGN(MTU + WRAP, ARCH_DMA_MINALIGN))
46
47#define MVNETA_SMI_TIMEOUT 10000
48
49/* Registers */
50#define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2))
51#define MVNETA_RXQ_HW_BUF_ALLOC BIT(1)
52#define MVNETA_RXQ_PKT_OFFSET_ALL_MASK (0xf << 8)
53#define MVNETA_RXQ_PKT_OFFSET_MASK(offs) ((offs) << 8)
54#define MVNETA_RXQ_THRESHOLD_REG(q) (0x14c0 + ((q) << 2))
55#define MVNETA_RXQ_NON_OCCUPIED(v) ((v) << 16)
56#define MVNETA_RXQ_BASE_ADDR_REG(q) (0x1480 + ((q) << 2))
57#define MVNETA_RXQ_SIZE_REG(q) (0x14a0 + ((q) << 2))
58#define MVNETA_RXQ_BUF_SIZE_SHIFT 19
59#define MVNETA_RXQ_BUF_SIZE_MASK (0x1fff << 19)
60#define MVNETA_RXQ_STATUS_REG(q) (0x14e0 + ((q) << 2))
61#define MVNETA_RXQ_OCCUPIED_ALL_MASK 0x3fff
62#define MVNETA_RXQ_STATUS_UPDATE_REG(q) (0x1500 + ((q) << 2))
63#define MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT 16
64#define MVNETA_RXQ_ADD_NON_OCCUPIED_MAX 255
65#define MVNETA_PORT_RX_RESET 0x1cc0
66#define MVNETA_PORT_RX_DMA_RESET BIT(0)
67#define MVNETA_PHY_ADDR 0x2000
68#define MVNETA_PHY_ADDR_MASK 0x1f
69#define MVNETA_SMI 0x2004
70#define MVNETA_PHY_REG_MASK 0x1f
71/* SMI register fields */
72#define MVNETA_SMI_DATA_OFFS 0 /* Data */
73#define MVNETA_SMI_DATA_MASK (0xffff << MVNETA_SMI_DATA_OFFS)
74#define MVNETA_SMI_DEV_ADDR_OFFS 16 /* PHY device address */
75#define MVNETA_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr*/
76#define MVNETA_SMI_OPCODE_OFFS 26 /* Write/Read opcode */
77#define MVNETA_SMI_OPCODE_READ (1 << MVNETA_SMI_OPCODE_OFFS)
78#define MVNETA_SMI_READ_VALID (1 << 27) /* Read Valid */
79#define MVNETA_SMI_BUSY (1 << 28) /* Busy */
80#define MVNETA_MBUS_RETRY 0x2010
81#define MVNETA_UNIT_INTR_CAUSE 0x2080
82#define MVNETA_UNIT_CONTROL 0x20B0
83#define MVNETA_PHY_POLLING_ENABLE BIT(1)
84#define MVNETA_WIN_BASE(w) (0x2200 + ((w) << 3))
85#define MVNETA_WIN_SIZE(w) (0x2204 + ((w) << 3))
86#define MVNETA_WIN_REMAP(w) (0x2280 + ((w) << 2))
Stefan Roese544eefe2016-05-19 17:46:36 +020087#define MVNETA_WIN_SIZE_MASK (0xffff0000)
Stefan Roese19fc2ea2014-10-22 12:13:14 +020088#define MVNETA_BASE_ADDR_ENABLE 0x2290
Stefan Roese544eefe2016-05-19 17:46:36 +020089#define MVNETA_BASE_ADDR_ENABLE_BIT 0x1
90#define MVNETA_PORT_ACCESS_PROTECT 0x2294
91#define MVNETA_PORT_ACCESS_PROTECT_WIN0_RW 0x3
Stefan Roese19fc2ea2014-10-22 12:13:14 +020092#define MVNETA_PORT_CONFIG 0x2400
93#define MVNETA_UNI_PROMISC_MODE BIT(0)
94#define MVNETA_DEF_RXQ(q) ((q) << 1)
95#define MVNETA_DEF_RXQ_ARP(q) ((q) << 4)
96#define MVNETA_TX_UNSET_ERR_SUM BIT(12)
97#define MVNETA_DEF_RXQ_TCP(q) ((q) << 16)
98#define MVNETA_DEF_RXQ_UDP(q) ((q) << 19)
99#define MVNETA_DEF_RXQ_BPDU(q) ((q) << 22)
100#define MVNETA_RX_CSUM_WITH_PSEUDO_HDR BIT(25)
101#define MVNETA_PORT_CONFIG_DEFL_VALUE(q) (MVNETA_DEF_RXQ(q) | \
102 MVNETA_DEF_RXQ_ARP(q) | \
103 MVNETA_DEF_RXQ_TCP(q) | \
104 MVNETA_DEF_RXQ_UDP(q) | \
105 MVNETA_DEF_RXQ_BPDU(q) | \
106 MVNETA_TX_UNSET_ERR_SUM | \
107 MVNETA_RX_CSUM_WITH_PSEUDO_HDR)
108#define MVNETA_PORT_CONFIG_EXTEND 0x2404
109#define MVNETA_MAC_ADDR_LOW 0x2414
110#define MVNETA_MAC_ADDR_HIGH 0x2418
111#define MVNETA_SDMA_CONFIG 0x241c
112#define MVNETA_SDMA_BRST_SIZE_16 4
113#define MVNETA_RX_BRST_SZ_MASK(burst) ((burst) << 1)
114#define MVNETA_RX_NO_DATA_SWAP BIT(4)
115#define MVNETA_TX_NO_DATA_SWAP BIT(5)
116#define MVNETA_DESC_SWAP BIT(6)
117#define MVNETA_TX_BRST_SZ_MASK(burst) ((burst) << 22)
118#define MVNETA_PORT_STATUS 0x2444
119#define MVNETA_TX_IN_PRGRS BIT(1)
120#define MVNETA_TX_FIFO_EMPTY BIT(8)
121#define MVNETA_RX_MIN_FRAME_SIZE 0x247c
122#define MVNETA_SERDES_CFG 0x24A0
123#define MVNETA_SGMII_SERDES_PROTO 0x0cc7
124#define MVNETA_QSGMII_SERDES_PROTO 0x0667
125#define MVNETA_TYPE_PRIO 0x24bc
126#define MVNETA_FORCE_UNI BIT(21)
127#define MVNETA_TXQ_CMD_1 0x24e4
128#define MVNETA_TXQ_CMD 0x2448
129#define MVNETA_TXQ_DISABLE_SHIFT 8
130#define MVNETA_TXQ_ENABLE_MASK 0x000000ff
131#define MVNETA_ACC_MODE 0x2500
132#define MVNETA_CPU_MAP(cpu) (0x2540 + ((cpu) << 2))
133#define MVNETA_CPU_RXQ_ACCESS_ALL_MASK 0x000000ff
134#define MVNETA_CPU_TXQ_ACCESS_ALL_MASK 0x0000ff00
135#define MVNETA_RXQ_TIME_COAL_REG(q) (0x2580 + ((q) << 2))
136
137/* Exception Interrupt Port/Queue Cause register */
138
139#define MVNETA_INTR_NEW_CAUSE 0x25a0
140#define MVNETA_INTR_NEW_MASK 0x25a4
141
142/* bits 0..7 = TXQ SENT, one bit per queue.
143 * bits 8..15 = RXQ OCCUP, one bit per queue.
144 * bits 16..23 = RXQ FREE, one bit per queue.
145 * bit 29 = OLD_REG_SUM, see old reg ?
146 * bit 30 = TX_ERR_SUM, one bit for 4 ports
147 * bit 31 = MISC_SUM, one bit for 4 ports
148 */
149#define MVNETA_TX_INTR_MASK(nr_txqs) (((1 << nr_txqs) - 1) << 0)
150#define MVNETA_TX_INTR_MASK_ALL (0xff << 0)
151#define MVNETA_RX_INTR_MASK(nr_rxqs) (((1 << nr_rxqs) - 1) << 8)
152#define MVNETA_RX_INTR_MASK_ALL (0xff << 8)
153
154#define MVNETA_INTR_OLD_CAUSE 0x25a8
155#define MVNETA_INTR_OLD_MASK 0x25ac
156
157/* Data Path Port/Queue Cause Register */
158#define MVNETA_INTR_MISC_CAUSE 0x25b0
159#define MVNETA_INTR_MISC_MASK 0x25b4
160#define MVNETA_INTR_ENABLE 0x25b8
161
162#define MVNETA_RXQ_CMD 0x2680
163#define MVNETA_RXQ_DISABLE_SHIFT 8
164#define MVNETA_RXQ_ENABLE_MASK 0x000000ff
165#define MVETH_TXQ_TOKEN_COUNT_REG(q) (0x2700 + ((q) << 4))
166#define MVETH_TXQ_TOKEN_CFG_REG(q) (0x2704 + ((q) << 4))
167#define MVNETA_GMAC_CTRL_0 0x2c00
168#define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2
169#define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc
170#define MVNETA_GMAC0_PORT_ENABLE BIT(0)
171#define MVNETA_GMAC_CTRL_2 0x2c08
172#define MVNETA_GMAC2_PCS_ENABLE BIT(3)
173#define MVNETA_GMAC2_PORT_RGMII BIT(4)
174#define MVNETA_GMAC2_PORT_RESET BIT(6)
175#define MVNETA_GMAC_STATUS 0x2c10
176#define MVNETA_GMAC_LINK_UP BIT(0)
177#define MVNETA_GMAC_SPEED_1000 BIT(1)
178#define MVNETA_GMAC_SPEED_100 BIT(2)
179#define MVNETA_GMAC_FULL_DUPLEX BIT(3)
180#define MVNETA_GMAC_RX_FLOW_CTRL_ENABLE BIT(4)
181#define MVNETA_GMAC_TX_FLOW_CTRL_ENABLE BIT(5)
182#define MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE BIT(6)
183#define MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE BIT(7)
184#define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c
185#define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0)
186#define MVNETA_GMAC_FORCE_LINK_PASS BIT(1)
Konstantin Porotchkin278d30c2017-02-16 13:52:28 +0200187#define MVNETA_GMAC_FORCE_LINK_UP (BIT(0) | BIT(1))
188#define MVNETA_GMAC_IB_BYPASS_AN_EN BIT(3)
Stefan Roese19fc2ea2014-10-22 12:13:14 +0200189#define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5)
190#define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6)
191#define MVNETA_GMAC_AN_SPEED_EN BIT(7)
Konstantin Porotchkin278d30c2017-02-16 13:52:28 +0200192#define MVNETA_GMAC_SET_FC_EN BIT(8)
193#define MVNETA_GMAC_ADVERT_FC_EN BIT(9)
Stefan Roese19fc2ea2014-10-22 12:13:14 +0200194#define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12)
195#define MVNETA_GMAC_AN_DUPLEX_EN BIT(13)
Konstantin Porotchkin278d30c2017-02-16 13:52:28 +0200196#define MVNETA_GMAC_SAMPLE_TX_CFG_EN BIT(15)
Stefan Roese19fc2ea2014-10-22 12:13:14 +0200197#define MVNETA_MIB_COUNTERS_BASE 0x3080
198#define MVNETA_MIB_LATE_COLLISION 0x7c
199#define MVNETA_DA_FILT_SPEC_MCAST 0x3400
200#define MVNETA_DA_FILT_OTH_MCAST 0x3500
201#define MVNETA_DA_FILT_UCAST_BASE 0x3600
202#define MVNETA_TXQ_BASE_ADDR_REG(q) (0x3c00 + ((q) << 2))
203#define MVNETA_TXQ_SIZE_REG(q) (0x3c20 + ((q) << 2))
204#define MVNETA_TXQ_SENT_THRESH_ALL_MASK 0x3fff0000
205#define MVNETA_TXQ_SENT_THRESH_MASK(coal) ((coal) << 16)
206#define MVNETA_TXQ_UPDATE_REG(q) (0x3c60 + ((q) << 2))
207#define MVNETA_TXQ_DEC_SENT_SHIFT 16
208#define MVNETA_TXQ_STATUS_REG(q) (0x3c40 + ((q) << 2))
209#define MVNETA_TXQ_SENT_DESC_SHIFT 16
210#define MVNETA_TXQ_SENT_DESC_MASK 0x3fff0000
211#define MVNETA_PORT_TX_RESET 0x3cf0
212#define MVNETA_PORT_TX_DMA_RESET BIT(0)
213#define MVNETA_TX_MTU 0x3e0c
214#define MVNETA_TX_TOKEN_SIZE 0x3e14
215#define MVNETA_TX_TOKEN_SIZE_MAX 0xffffffff
216#define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2))
217#define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff
218
219/* Descriptor ring Macros */
220#define MVNETA_QUEUE_NEXT_DESC(q, index) \
221 (((index) < (q)->last_desc) ? ((index) + 1) : 0)
222
223/* Various constants */
224
225/* Coalescing */
226#define MVNETA_TXDONE_COAL_PKTS 16
227#define MVNETA_RX_COAL_PKTS 32
228#define MVNETA_RX_COAL_USEC 100
229
230/* The two bytes Marvell header. Either contains a special value used
231 * by Marvell switches when a specific hardware mode is enabled (not
232 * supported by this driver) or is filled automatically by zeroes on
233 * the RX side. Those two bytes being at the front of the Ethernet
234 * header, they allow to have the IP header aligned on a 4 bytes
235 * boundary automatically: the hardware skips those two bytes on its
236 * own.
237 */
238#define MVNETA_MH_SIZE 2
239
240#define MVNETA_VLAN_TAG_LEN 4
241
242#define MVNETA_CPU_D_CACHE_LINE_SIZE 32
243#define MVNETA_TX_CSUM_MAX_SIZE 9800
244#define MVNETA_ACC_MODE_EXT 1
245
246/* Timeout constants */
247#define MVNETA_TX_DISABLE_TIMEOUT_MSEC 1000
248#define MVNETA_RX_DISABLE_TIMEOUT_MSEC 1000
249#define MVNETA_TX_FIFO_EMPTY_TIMEOUT 10000
250
251#define MVNETA_TX_MTU_MAX 0x3ffff
252
253/* Max number of Rx descriptors */
254#define MVNETA_MAX_RXD 16
255
256/* Max number of Tx descriptors */
257#define MVNETA_MAX_TXD 16
258
259/* descriptor aligned size */
260#define MVNETA_DESC_ALIGNED_SIZE 32
261
262struct mvneta_port {
263 void __iomem *base;
264 struct mvneta_rx_queue *rxqs;
265 struct mvneta_tx_queue *txqs;
266
267 u8 mcast_count[256];
268 u16 tx_ring_size;
269 u16 rx_ring_size;
270
271 phy_interface_t phy_interface;
272 unsigned int link;
273 unsigned int duplex;
274 unsigned int speed;
275
276 int init;
277 int phyaddr;
278 struct phy_device *phydev;
Simon Glassbcee8d62019-12-06 21:41:35 -0700279#if CONFIG_IS_ENABLED(DM_GPIO)
Aditya Prayoga18bfc8f2018-12-05 00:39:23 +0800280 struct gpio_desc phy_reset_gpio;
281#endif
Stefan Roese19fc2ea2014-10-22 12:13:14 +0200282 struct mii_dev *bus;
283};
284
285/* The mvneta_tx_desc and mvneta_rx_desc structures describe the
286 * layout of the transmit and reception DMA descriptors, and their
287 * layout is therefore defined by the hardware design
288 */
289
290#define MVNETA_TX_L3_OFF_SHIFT 0
291#define MVNETA_TX_IP_HLEN_SHIFT 8
292#define MVNETA_TX_L4_UDP BIT(16)
293#define MVNETA_TX_L3_IP6 BIT(17)
294#define MVNETA_TXD_IP_CSUM BIT(18)
295#define MVNETA_TXD_Z_PAD BIT(19)
296#define MVNETA_TXD_L_DESC BIT(20)
297#define MVNETA_TXD_F_DESC BIT(21)
298#define MVNETA_TXD_FLZ_DESC (MVNETA_TXD_Z_PAD | \
299 MVNETA_TXD_L_DESC | \
300 MVNETA_TXD_F_DESC)
301#define MVNETA_TX_L4_CSUM_FULL BIT(30)
302#define MVNETA_TX_L4_CSUM_NOT BIT(31)
303
304#define MVNETA_RXD_ERR_CRC 0x0
305#define MVNETA_RXD_ERR_SUMMARY BIT(16)
306#define MVNETA_RXD_ERR_OVERRUN BIT(17)
307#define MVNETA_RXD_ERR_LEN BIT(18)
308#define MVNETA_RXD_ERR_RESOURCE (BIT(17) | BIT(18))
309#define MVNETA_RXD_ERR_CODE_MASK (BIT(17) | BIT(18))
310#define MVNETA_RXD_L3_IP4 BIT(25)
311#define MVNETA_RXD_FIRST_LAST_DESC (BIT(26) | BIT(27))
312#define MVNETA_RXD_L4_CSUM_OK BIT(30)
313
314struct mvneta_tx_desc {
315 u32 command; /* Options used by HW for packet transmitting.*/
316 u16 reserverd1; /* csum_l4 (for future use) */
317 u16 data_size; /* Data size of transmitted packet in bytes */
318 u32 buf_phys_addr; /* Physical addr of transmitted buffer */
319 u32 reserved2; /* hw_cmd - (for future use, PMT) */
320 u32 reserved3[4]; /* Reserved - (for future use) */
321};
322
323struct mvneta_rx_desc {
324 u32 status; /* Info about received packet */
325 u16 reserved1; /* pnc_info - (for future use, PnC) */
326 u16 data_size; /* Size of received packet in bytes */
327
328 u32 buf_phys_addr; /* Physical address of the buffer */
329 u32 reserved2; /* pnc_flow_id (for future use, PnC) */
330
331 u32 buf_cookie; /* cookie for access to RX buffer in rx path */
332 u16 reserved3; /* prefetch_cmd, for future use */
333 u16 reserved4; /* csum_l4 - (for future use, PnC) */
334
335 u32 reserved5; /* pnc_extra PnC (for future use, PnC) */
336 u32 reserved6; /* hw_cmd (for future use, PnC and HWF) */
337};
338
339struct mvneta_tx_queue {
340 /* Number of this TX queue, in the range 0-7 */
341 u8 id;
342
343 /* Number of TX DMA descriptors in the descriptor ring */
344 int size;
345
346 /* Index of last TX DMA descriptor that was inserted */
347 int txq_put_index;
348
349 /* Index of the TX DMA descriptor to be cleaned up */
350 int txq_get_index;
351
352 /* Virtual address of the TX DMA descriptors array */
353 struct mvneta_tx_desc *descs;
354
355 /* DMA address of the TX DMA descriptors array */
356 dma_addr_t descs_phys;
357
358 /* Index of the last TX DMA descriptor */
359 int last_desc;
360
361 /* Index of the next TX DMA descriptor to process */
362 int next_desc_to_proc;
363};
364
365struct mvneta_rx_queue {
366 /* rx queue number, in the range 0-7 */
367 u8 id;
368
369 /* num of rx descriptors in the rx descriptor ring */
370 int size;
371
372 /* Virtual address of the RX DMA descriptors array */
373 struct mvneta_rx_desc *descs;
374
375 /* DMA address of the RX DMA descriptors array */
376 dma_addr_t descs_phys;
377
378 /* Index of the last RX DMA descriptor */
379 int last_desc;
380
381 /* Index of the next RX DMA descriptor to process */
382 int next_desc_to_proc;
383};
384
385/* U-Boot doesn't use the queues, so set the number to 1 */
386static int rxq_number = 1;
387static int txq_number = 1;
388static int rxq_def;
389
390struct buffer_location {
391 struct mvneta_tx_desc *tx_descs;
392 struct mvneta_rx_desc *rx_descs;
393 u32 rx_buffers;
394};
395
396/*
397 * All 4 interfaces use the same global buffer, since only one interface
398 * can be enabled at once
399 */
400static struct buffer_location buffer_loc;
401
402/*
403 * Page table entries are set to 1MB, or multiples of 1MB
404 * (not < 1MB). driver uses less bd's so use 1MB bdspace.
405 */
406#define BD_SPACE (1 << 20)
407
Konstantin Porotchkin976feda2017-02-16 13:52:27 +0200408/*
409 * Dummy implementation that can be overwritten by a board
410 * specific function
411 */
412__weak int board_network_enable(struct mii_dev *bus)
413{
414 return 0;
415}
416
Stefan Roese19fc2ea2014-10-22 12:13:14 +0200417/* Utility/helper methods */
418
419/* Write helper method */
420static void mvreg_write(struct mvneta_port *pp, u32 offset, u32 data)
421{
422 writel(data, pp->base + offset);
423}
424
425/* Read helper method */
426static u32 mvreg_read(struct mvneta_port *pp, u32 offset)
427{
428 return readl(pp->base + offset);
429}
430
431/* Clear all MIB counters */
432static void mvneta_mib_counters_clear(struct mvneta_port *pp)
433{
434 int i;
435
436 /* Perform dummy reads from MIB counters */
437 for (i = 0; i < MVNETA_MIB_LATE_COLLISION; i += 4)
438 mvreg_read(pp, (MVNETA_MIB_COUNTERS_BASE + i));
439}
440
441/* Rx descriptors helper methods */
442
443/* Checks whether the RX descriptor having this status is both the first
444 * and the last descriptor for the RX packet. Each RX packet is currently
445 * received through a single RX descriptor, so not having each RX
446 * descriptor with its first and last bits set is an error
447 */
448static int mvneta_rxq_desc_is_first_last(u32 status)
449{
450 return (status & MVNETA_RXD_FIRST_LAST_DESC) ==
451 MVNETA_RXD_FIRST_LAST_DESC;
452}
453
454/* Add number of descriptors ready to receive new packets */
455static void mvneta_rxq_non_occup_desc_add(struct mvneta_port *pp,
456 struct mvneta_rx_queue *rxq,
457 int ndescs)
458{
459 /* Only MVNETA_RXQ_ADD_NON_OCCUPIED_MAX (255) descriptors can
460 * be added at once
461 */
462 while (ndescs > MVNETA_RXQ_ADD_NON_OCCUPIED_MAX) {
463 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id),
464 (MVNETA_RXQ_ADD_NON_OCCUPIED_MAX <<
465 MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT));
466 ndescs -= MVNETA_RXQ_ADD_NON_OCCUPIED_MAX;
467 }
468
469 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id),
470 (ndescs << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT));
471}
472
473/* Get number of RX descriptors occupied by received packets */
474static int mvneta_rxq_busy_desc_num_get(struct mvneta_port *pp,
475 struct mvneta_rx_queue *rxq)
476{
477 u32 val;
478
479 val = mvreg_read(pp, MVNETA_RXQ_STATUS_REG(rxq->id));
480 return val & MVNETA_RXQ_OCCUPIED_ALL_MASK;
481}
482
483/* Update num of rx desc called upon return from rx path or
484 * from mvneta_rxq_drop_pkts().
485 */
486static void mvneta_rxq_desc_num_update(struct mvneta_port *pp,
487 struct mvneta_rx_queue *rxq,
488 int rx_done, int rx_filled)
489{
490 u32 val;
491
492 if ((rx_done <= 0xff) && (rx_filled <= 0xff)) {
493 val = rx_done |
494 (rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT);
495 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val);
496 return;
497 }
498
499 /* Only 255 descriptors can be added at once */
500 while ((rx_done > 0) || (rx_filled > 0)) {
501 if (rx_done <= 0xff) {
502 val = rx_done;
503 rx_done = 0;
504 } else {
505 val = 0xff;
506 rx_done -= 0xff;
507 }
508 if (rx_filled <= 0xff) {
509 val |= rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT;
510 rx_filled = 0;
511 } else {
512 val |= 0xff << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT;
513 rx_filled -= 0xff;
514 }
515 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val);
516 }
517}
518
519/* Get pointer to next RX descriptor to be processed by SW */
520static struct mvneta_rx_desc *
521mvneta_rxq_next_desc_get(struct mvneta_rx_queue *rxq)
522{
523 int rx_desc = rxq->next_desc_to_proc;
524
525 rxq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(rxq, rx_desc);
526 return rxq->descs + rx_desc;
527}
528
529/* Tx descriptors helper methods */
530
531/* Update HW with number of TX descriptors to be sent */
532static void mvneta_txq_pend_desc_add(struct mvneta_port *pp,
533 struct mvneta_tx_queue *txq,
534 int pend_desc)
535{
536 u32 val;
537
538 /* Only 255 descriptors can be added at once ; Assume caller
Heinrich Schuchardte4691562017-08-29 18:44:37 +0200539 * process TX descriptors in quanta less than 256
Stefan Roese19fc2ea2014-10-22 12:13:14 +0200540 */
541 val = pend_desc;
542 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
543}
544
545/* Get pointer to next TX descriptor to be processed (send) by HW */
546static struct mvneta_tx_desc *
547mvneta_txq_next_desc_get(struct mvneta_tx_queue *txq)
548{
549 int tx_desc = txq->next_desc_to_proc;
550
551 txq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(txq, tx_desc);
552 return txq->descs + tx_desc;
553}
554
555/* Set rxq buf size */
556static void mvneta_rxq_buf_size_set(struct mvneta_port *pp,
557 struct mvneta_rx_queue *rxq,
558 int buf_size)
559{
560 u32 val;
561
562 val = mvreg_read(pp, MVNETA_RXQ_SIZE_REG(rxq->id));
563
564 val &= ~MVNETA_RXQ_BUF_SIZE_MASK;
565 val |= ((buf_size >> 3) << MVNETA_RXQ_BUF_SIZE_SHIFT);
566
567 mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), val);
568}
569
Konstantin Porotchkin278d30c2017-02-16 13:52:28 +0200570static int mvneta_port_is_fixed_link(struct mvneta_port *pp)
571{
572 /* phy_addr is set to invalid value for fixed link */
573 return pp->phyaddr > PHY_MAX_ADDR;
574}
575
576
Stefan Roese19fc2ea2014-10-22 12:13:14 +0200577/* Start the Ethernet port RX and TX activity */
578static void mvneta_port_up(struct mvneta_port *pp)
579{
580 int queue;
581 u32 q_map;
582
583 /* Enable all initialized TXs. */
584 mvneta_mib_counters_clear(pp);
585 q_map = 0;
586 for (queue = 0; queue < txq_number; queue++) {
587 struct mvneta_tx_queue *txq = &pp->txqs[queue];
588 if (txq->descs != NULL)
589 q_map |= (1 << queue);
590 }
591 mvreg_write(pp, MVNETA_TXQ_CMD, q_map);
592
593 /* Enable all initialized RXQs. */
594 q_map = 0;
595 for (queue = 0; queue < rxq_number; queue++) {
596 struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
597 if (rxq->descs != NULL)
598 q_map |= (1 << queue);
599 }
600 mvreg_write(pp, MVNETA_RXQ_CMD, q_map);
601}
602
603/* Stop the Ethernet port activity */
604static void mvneta_port_down(struct mvneta_port *pp)
605{
606 u32 val;
607 int count;
608
609 /* Stop Rx port activity. Check port Rx activity. */
610 val = mvreg_read(pp, MVNETA_RXQ_CMD) & MVNETA_RXQ_ENABLE_MASK;
611
612 /* Issue stop command for active channels only */
613 if (val != 0)
614 mvreg_write(pp, MVNETA_RXQ_CMD,
615 val << MVNETA_RXQ_DISABLE_SHIFT);
616
617 /* Wait for all Rx activity to terminate. */
618 count = 0;
619 do {
620 if (count++ >= MVNETA_RX_DISABLE_TIMEOUT_MSEC) {
621 netdev_warn(pp->dev,
622 "TIMEOUT for RX stopped ! rx_queue_cmd: 0x08%x\n",
623 val);
624 break;
625 }
626 mdelay(1);
627
628 val = mvreg_read(pp, MVNETA_RXQ_CMD);
629 } while (val & 0xff);
630
631 /* Stop Tx port activity. Check port Tx activity. Issue stop
632 * command for active channels only
633 */
634 val = (mvreg_read(pp, MVNETA_TXQ_CMD)) & MVNETA_TXQ_ENABLE_MASK;
635
636 if (val != 0)
637 mvreg_write(pp, MVNETA_TXQ_CMD,
638 (val << MVNETA_TXQ_DISABLE_SHIFT));
639
640 /* Wait for all Tx activity to terminate. */
641 count = 0;
642 do {
643 if (count++ >= MVNETA_TX_DISABLE_TIMEOUT_MSEC) {
644 netdev_warn(pp->dev,
645 "TIMEOUT for TX stopped status=0x%08x\n",
646 val);
647 break;
648 }
649 mdelay(1);
650
651 /* Check TX Command reg that all Txqs are stopped */
652 val = mvreg_read(pp, MVNETA_TXQ_CMD);
653
654 } while (val & 0xff);
655
656 /* Double check to verify that TX FIFO is empty */
657 count = 0;
658 do {
659 if (count++ >= MVNETA_TX_FIFO_EMPTY_TIMEOUT) {
660 netdev_warn(pp->dev,
661 "TX FIFO empty timeout status=0x08%x\n",
662 val);
663 break;
664 }
665 mdelay(1);
666
667 val = mvreg_read(pp, MVNETA_PORT_STATUS);
668 } while (!(val & MVNETA_TX_FIFO_EMPTY) &&
669 (val & MVNETA_TX_IN_PRGRS));
670
671 udelay(200);
672}
673
674/* Enable the port by setting the port enable bit of the MAC control register */
675static void mvneta_port_enable(struct mvneta_port *pp)
676{
677 u32 val;
678
679 /* Enable port */
680 val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
681 val |= MVNETA_GMAC0_PORT_ENABLE;
682 mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
683}
684
685/* Disable the port and wait for about 200 usec before retuning */
686static void mvneta_port_disable(struct mvneta_port *pp)
687{
688 u32 val;
689
690 /* Reset the Enable bit in the Serial Control Register */
691 val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
692 val &= ~MVNETA_GMAC0_PORT_ENABLE;
693 mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
694
695 udelay(200);
696}
697
698/* Multicast tables methods */
699
700/* Set all entries in Unicast MAC Table; queue==-1 means reject all */
701static void mvneta_set_ucast_table(struct mvneta_port *pp, int queue)
702{
703 int offset;
704 u32 val;
705
706 if (queue == -1) {
707 val = 0;
708 } else {
709 val = 0x1 | (queue << 1);
710 val |= (val << 24) | (val << 16) | (val << 8);
711 }
712
713 for (offset = 0; offset <= 0xc; offset += 4)
714 mvreg_write(pp, MVNETA_DA_FILT_UCAST_BASE + offset, val);
715}
716
717/* Set all entries in Special Multicast MAC Table; queue==-1 means reject all */
718static void mvneta_set_special_mcast_table(struct mvneta_port *pp, int queue)
719{
720 int offset;
721 u32 val;
722
723 if (queue == -1) {
724 val = 0;
725 } else {
726 val = 0x1 | (queue << 1);
727 val |= (val << 24) | (val << 16) | (val << 8);
728 }
729
730 for (offset = 0; offset <= 0xfc; offset += 4)
731 mvreg_write(pp, MVNETA_DA_FILT_SPEC_MCAST + offset, val);
732}
733
734/* Set all entries in Other Multicast MAC Table. queue==-1 means reject all */
735static void mvneta_set_other_mcast_table(struct mvneta_port *pp, int queue)
736{
737 int offset;
738 u32 val;
739
740 if (queue == -1) {
741 memset(pp->mcast_count, 0, sizeof(pp->mcast_count));
742 val = 0;
743 } else {
744 memset(pp->mcast_count, 1, sizeof(pp->mcast_count));
745 val = 0x1 | (queue << 1);
746 val |= (val << 24) | (val << 16) | (val << 8);
747 }
748
749 for (offset = 0; offset <= 0xfc; offset += 4)
750 mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
751}
752
753/* This method sets defaults to the NETA port:
754 * Clears interrupt Cause and Mask registers.
755 * Clears all MAC tables.
756 * Sets defaults to all registers.
757 * Resets RX and TX descriptor rings.
758 * Resets PHY.
759 * This method can be called after mvneta_port_down() to return the port
760 * settings to defaults.
761 */
762static void mvneta_defaults_set(struct mvneta_port *pp)
763{
764 int cpu;
765 int queue;
766 u32 val;
767
768 /* Clear all Cause registers */
769 mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0);
770 mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
771 mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
772
773 /* Mask all interrupts */
774 mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
775 mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
776 mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
777 mvreg_write(pp, MVNETA_INTR_ENABLE, 0);
778
779 /* Enable MBUS Retry bit16 */
780 mvreg_write(pp, MVNETA_MBUS_RETRY, 0x20);
781
782 /* Set CPU queue access map - all CPUs have access to all RX
783 * queues and to all TX queues
784 */
785 for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++)
786 mvreg_write(pp, MVNETA_CPU_MAP(cpu),
787 (MVNETA_CPU_RXQ_ACCESS_ALL_MASK |
788 MVNETA_CPU_TXQ_ACCESS_ALL_MASK));
789
790 /* Reset RX and TX DMAs */
791 mvreg_write(pp, MVNETA_PORT_RX_RESET, MVNETA_PORT_RX_DMA_RESET);
792 mvreg_write(pp, MVNETA_PORT_TX_RESET, MVNETA_PORT_TX_DMA_RESET);
793
794 /* Disable Legacy WRR, Disable EJP, Release from reset */
795 mvreg_write(pp, MVNETA_TXQ_CMD_1, 0);
796 for (queue = 0; queue < txq_number; queue++) {
797 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(queue), 0);
798 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(queue), 0);
799 }
800
801 mvreg_write(pp, MVNETA_PORT_TX_RESET, 0);
802 mvreg_write(pp, MVNETA_PORT_RX_RESET, 0);
803
804 /* Set Port Acceleration Mode */
805 val = MVNETA_ACC_MODE_EXT;
806 mvreg_write(pp, MVNETA_ACC_MODE, val);
807
808 /* Update val of portCfg register accordingly with all RxQueue types */
809 val = MVNETA_PORT_CONFIG_DEFL_VALUE(rxq_def);
810 mvreg_write(pp, MVNETA_PORT_CONFIG, val);
811
812 val = 0;
813 mvreg_write(pp, MVNETA_PORT_CONFIG_EXTEND, val);
814 mvreg_write(pp, MVNETA_RX_MIN_FRAME_SIZE, 64);
815
816 /* Build PORT_SDMA_CONFIG_REG */
817 val = 0;
818
819 /* Default burst size */
820 val |= MVNETA_TX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16);
821 val |= MVNETA_RX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16);
822 val |= MVNETA_RX_NO_DATA_SWAP | MVNETA_TX_NO_DATA_SWAP;
823
824 /* Assign port SDMA configuration */
825 mvreg_write(pp, MVNETA_SDMA_CONFIG, val);
826
Konstantin Porotchkin278d30c2017-02-16 13:52:28 +0200827 /* Enable PHY polling in hardware if not in fixed-link mode */
828 if (!mvneta_port_is_fixed_link(pp)) {
829 val = mvreg_read(pp, MVNETA_UNIT_CONTROL);
830 val |= MVNETA_PHY_POLLING_ENABLE;
831 mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
832 }
Stefan Roese19fc2ea2014-10-22 12:13:14 +0200833
834 mvneta_set_ucast_table(pp, -1);
835 mvneta_set_special_mcast_table(pp, -1);
836 mvneta_set_other_mcast_table(pp, -1);
837}
838
839/* Set unicast address */
840static void mvneta_set_ucast_addr(struct mvneta_port *pp, u8 last_nibble,
841 int queue)
842{
843 unsigned int unicast_reg;
844 unsigned int tbl_offset;
845 unsigned int reg_offset;
846
847 /* Locate the Unicast table entry */
848 last_nibble = (0xf & last_nibble);
849
850 /* offset from unicast tbl base */
851 tbl_offset = (last_nibble / 4) * 4;
852
853 /* offset within the above reg */
854 reg_offset = last_nibble % 4;
855
856 unicast_reg = mvreg_read(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset));
857
858 if (queue == -1) {
859 /* Clear accepts frame bit at specified unicast DA tbl entry */
860 unicast_reg &= ~(0xff << (8 * reg_offset));
861 } else {
862 unicast_reg &= ~(0xff << (8 * reg_offset));
863 unicast_reg |= ((0x01 | (queue << 1)) << (8 * reg_offset));
864 }
865
866 mvreg_write(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset), unicast_reg);
867}
868
869/* Set mac address */
870static void mvneta_mac_addr_set(struct mvneta_port *pp, unsigned char *addr,
871 int queue)
872{
873 unsigned int mac_h;
874 unsigned int mac_l;
875
876 if (queue != -1) {
877 mac_l = (addr[4] << 8) | (addr[5]);
878 mac_h = (addr[0] << 24) | (addr[1] << 16) |
879 (addr[2] << 8) | (addr[3] << 0);
880
881 mvreg_write(pp, MVNETA_MAC_ADDR_LOW, mac_l);
882 mvreg_write(pp, MVNETA_MAC_ADDR_HIGH, mac_h);
883 }
884
885 /* Accept frames of this address */
886 mvneta_set_ucast_addr(pp, addr[5], queue);
887}
888
Matt Pelland0a85f022018-03-27 13:18:25 -0400889static int mvneta_write_hwaddr(struct udevice *dev)
890{
891 mvneta_mac_addr_set(dev_get_priv(dev),
892 ((struct eth_pdata *)dev_get_platdata(dev))->enetaddr,
893 rxq_def);
894
895 return 0;
896}
897
Stefan Roese19fc2ea2014-10-22 12:13:14 +0200898/* Handle rx descriptor fill by setting buf_cookie and buf_phys_addr */
899static void mvneta_rx_desc_fill(struct mvneta_rx_desc *rx_desc,
900 u32 phys_addr, u32 cookie)
901{
902 rx_desc->buf_cookie = cookie;
903 rx_desc->buf_phys_addr = phys_addr;
904}
905
906/* Decrement sent descriptors counter */
907static void mvneta_txq_sent_desc_dec(struct mvneta_port *pp,
908 struct mvneta_tx_queue *txq,
909 int sent_desc)
910{
911 u32 val;
912
913 /* Only 255 TX descriptors can be updated at once */
914 while (sent_desc > 0xff) {
915 val = 0xff << MVNETA_TXQ_DEC_SENT_SHIFT;
916 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
917 sent_desc = sent_desc - 0xff;
918 }
919
920 val = sent_desc << MVNETA_TXQ_DEC_SENT_SHIFT;
921 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
922}
923
924/* Get number of TX descriptors already sent by HW */
925static int mvneta_txq_sent_desc_num_get(struct mvneta_port *pp,
926 struct mvneta_tx_queue *txq)
927{
928 u32 val;
929 int sent_desc;
930
931 val = mvreg_read(pp, MVNETA_TXQ_STATUS_REG(txq->id));
932 sent_desc = (val & MVNETA_TXQ_SENT_DESC_MASK) >>
933 MVNETA_TXQ_SENT_DESC_SHIFT;
934
935 return sent_desc;
936}
937
938/* Display more error info */
939static void mvneta_rx_error(struct mvneta_port *pp,
940 struct mvneta_rx_desc *rx_desc)
941{
942 u32 status = rx_desc->status;
943
944 if (!mvneta_rxq_desc_is_first_last(status)) {
945 netdev_err(pp->dev,
946 "bad rx status %08x (buffer oversize), size=%d\n",
947 status, rx_desc->data_size);
948 return;
949 }
950
951 switch (status & MVNETA_RXD_ERR_CODE_MASK) {
952 case MVNETA_RXD_ERR_CRC:
953 netdev_err(pp->dev, "bad rx status %08x (crc error), size=%d\n",
954 status, rx_desc->data_size);
955 break;
956 case MVNETA_RXD_ERR_OVERRUN:
957 netdev_err(pp->dev, "bad rx status %08x (overrun error), size=%d\n",
958 status, rx_desc->data_size);
959 break;
960 case MVNETA_RXD_ERR_LEN:
961 netdev_err(pp->dev, "bad rx status %08x (max frame length error), size=%d\n",
962 status, rx_desc->data_size);
963 break;
964 case MVNETA_RXD_ERR_RESOURCE:
965 netdev_err(pp->dev, "bad rx status %08x (resource error), size=%d\n",
966 status, rx_desc->data_size);
967 break;
968 }
969}
970
971static struct mvneta_rx_queue *mvneta_rxq_handle_get(struct mvneta_port *pp,
972 int rxq)
973{
974 return &pp->rxqs[rxq];
975}
976
977
978/* Drop packets received by the RXQ and free buffers */
979static void mvneta_rxq_drop_pkts(struct mvneta_port *pp,
980 struct mvneta_rx_queue *rxq)
981{
982 int rx_done;
983
984 rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
985 if (rx_done)
986 mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
987}
988
989/* Handle rxq fill: allocates rxq skbs; called when initializing a port */
990static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
991 int num)
992{
993 int i;
994
995 for (i = 0; i < num; i++) {
996 u32 addr;
997
998 /* U-Boot special: Fill in the rx buffer addresses */
999 addr = buffer_loc.rx_buffers + (i * RX_BUFFER_SIZE);
1000 mvneta_rx_desc_fill(rxq->descs + i, addr, addr);
1001 }
1002
1003 /* Add this number of RX descriptors as non occupied (ready to
1004 * get packets)
1005 */
1006 mvneta_rxq_non_occup_desc_add(pp, rxq, i);
1007
1008 return 0;
1009}
1010
1011/* Rx/Tx queue initialization/cleanup methods */
1012
1013/* Create a specified RX queue */
1014static int mvneta_rxq_init(struct mvneta_port *pp,
1015 struct mvneta_rx_queue *rxq)
1016
1017{
1018 rxq->size = pp->rx_ring_size;
1019
1020 /* Allocate memory for RX descriptors */
1021 rxq->descs_phys = (dma_addr_t)rxq->descs;
1022 if (rxq->descs == NULL)
1023 return -ENOMEM;
1024
Jon Nettleton199b27b2018-05-30 08:52:29 +03001025 WARN_ON(rxq->descs != PTR_ALIGN(rxq->descs, ARCH_DMA_MINALIGN));
1026
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001027 rxq->last_desc = rxq->size - 1;
1028
1029 /* Set Rx descriptors queue starting address */
1030 mvreg_write(pp, MVNETA_RXQ_BASE_ADDR_REG(rxq->id), rxq->descs_phys);
1031 mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), rxq->size);
1032
1033 /* Fill RXQ with buffers from RX pool */
1034 mvneta_rxq_buf_size_set(pp, rxq, RX_BUFFER_SIZE);
1035 mvneta_rxq_fill(pp, rxq, rxq->size);
1036
1037 return 0;
1038}
1039
1040/* Cleanup Rx queue */
1041static void mvneta_rxq_deinit(struct mvneta_port *pp,
1042 struct mvneta_rx_queue *rxq)
1043{
1044 mvneta_rxq_drop_pkts(pp, rxq);
1045
1046 rxq->descs = NULL;
1047 rxq->last_desc = 0;
1048 rxq->next_desc_to_proc = 0;
1049 rxq->descs_phys = 0;
1050}
1051
1052/* Create and initialize a tx queue */
1053static int mvneta_txq_init(struct mvneta_port *pp,
1054 struct mvneta_tx_queue *txq)
1055{
1056 txq->size = pp->tx_ring_size;
1057
1058 /* Allocate memory for TX descriptors */
Stefan Roese3cbc11d2016-05-19 18:09:17 +02001059 txq->descs_phys = (dma_addr_t)txq->descs;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001060 if (txq->descs == NULL)
1061 return -ENOMEM;
1062
Jon Nettleton199b27b2018-05-30 08:52:29 +03001063 WARN_ON(txq->descs != PTR_ALIGN(txq->descs, ARCH_DMA_MINALIGN));
1064
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001065 txq->last_desc = txq->size - 1;
1066
1067 /* Set maximum bandwidth for enabled TXQs */
1068 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0x03ffffff);
1069 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0x3fffffff);
1070
1071 /* Set Tx descriptors queue starting address */
1072 mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), txq->descs_phys);
1073 mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), txq->size);
1074
1075 return 0;
1076}
1077
1078/* Free allocated resources when mvneta_txq_init() fails to allocate memory*/
1079static void mvneta_txq_deinit(struct mvneta_port *pp,
1080 struct mvneta_tx_queue *txq)
1081{
1082 txq->descs = NULL;
1083 txq->last_desc = 0;
1084 txq->next_desc_to_proc = 0;
1085 txq->descs_phys = 0;
1086
1087 /* Set minimum bandwidth for disabled TXQs */
1088 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0);
1089 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0);
1090
1091 /* Set Tx descriptors queue starting address and size */
1092 mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), 0);
1093 mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), 0);
1094}
1095
1096/* Cleanup all Tx queues */
1097static void mvneta_cleanup_txqs(struct mvneta_port *pp)
1098{
1099 int queue;
1100
1101 for (queue = 0; queue < txq_number; queue++)
1102 mvneta_txq_deinit(pp, &pp->txqs[queue]);
1103}
1104
1105/* Cleanup all Rx queues */
1106static void mvneta_cleanup_rxqs(struct mvneta_port *pp)
1107{
1108 int queue;
1109
1110 for (queue = 0; queue < rxq_number; queue++)
1111 mvneta_rxq_deinit(pp, &pp->rxqs[queue]);
1112}
1113
1114
1115/* Init all Rx queues */
1116static int mvneta_setup_rxqs(struct mvneta_port *pp)
1117{
1118 int queue;
1119
1120 for (queue = 0; queue < rxq_number; queue++) {
1121 int err = mvneta_rxq_init(pp, &pp->rxqs[queue]);
1122 if (err) {
1123 netdev_err(pp->dev, "%s: can't create rxq=%d\n",
1124 __func__, queue);
1125 mvneta_cleanup_rxqs(pp);
1126 return err;
1127 }
1128 }
1129
1130 return 0;
1131}
1132
1133/* Init all tx queues */
1134static int mvneta_setup_txqs(struct mvneta_port *pp)
1135{
1136 int queue;
1137
1138 for (queue = 0; queue < txq_number; queue++) {
1139 int err = mvneta_txq_init(pp, &pp->txqs[queue]);
1140 if (err) {
1141 netdev_err(pp->dev, "%s: can't create txq=%d\n",
1142 __func__, queue);
1143 mvneta_cleanup_txqs(pp);
1144 return err;
1145 }
1146 }
1147
1148 return 0;
1149}
1150
1151static void mvneta_start_dev(struct mvneta_port *pp)
1152{
1153 /* start the Rx/Tx activity */
1154 mvneta_port_enable(pp);
1155}
1156
Stefan Roesee3b9c982015-11-19 07:46:15 +01001157static void mvneta_adjust_link(struct udevice *dev)
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001158{
Stefan Roesee3b9c982015-11-19 07:46:15 +01001159 struct mvneta_port *pp = dev_get_priv(dev);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001160 struct phy_device *phydev = pp->phydev;
1161 int status_change = 0;
1162
Konstantin Porotchkin278d30c2017-02-16 13:52:28 +02001163 if (mvneta_port_is_fixed_link(pp)) {
1164 debug("Using fixed link, skip link adjust\n");
1165 return;
1166 }
1167
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001168 if (phydev->link) {
1169 if ((pp->speed != phydev->speed) ||
1170 (pp->duplex != phydev->duplex)) {
1171 u32 val;
1172
1173 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
1174 val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
1175 MVNETA_GMAC_CONFIG_GMII_SPEED |
1176 MVNETA_GMAC_CONFIG_FULL_DUPLEX |
1177 MVNETA_GMAC_AN_SPEED_EN |
1178 MVNETA_GMAC_AN_DUPLEX_EN);
1179
1180 if (phydev->duplex)
1181 val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
1182
1183 if (phydev->speed == SPEED_1000)
1184 val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
1185 else
1186 val |= MVNETA_GMAC_CONFIG_MII_SPEED;
1187
1188 mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
1189
1190 pp->duplex = phydev->duplex;
1191 pp->speed = phydev->speed;
1192 }
1193 }
1194
1195 if (phydev->link != pp->link) {
1196 if (!phydev->link) {
1197 pp->duplex = -1;
1198 pp->speed = 0;
1199 }
1200
1201 pp->link = phydev->link;
1202 status_change = 1;
1203 }
1204
1205 if (status_change) {
1206 if (phydev->link) {
1207 u32 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
1208 val |= (MVNETA_GMAC_FORCE_LINK_PASS |
1209 MVNETA_GMAC_FORCE_LINK_DOWN);
1210 mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
1211 mvneta_port_up(pp);
1212 } else {
1213 mvneta_port_down(pp);
1214 }
1215 }
1216}
1217
Stefan Roesee3b9c982015-11-19 07:46:15 +01001218static int mvneta_open(struct udevice *dev)
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001219{
Stefan Roesee3b9c982015-11-19 07:46:15 +01001220 struct mvneta_port *pp = dev_get_priv(dev);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001221 int ret;
1222
1223 ret = mvneta_setup_rxqs(pp);
1224 if (ret)
1225 return ret;
1226
1227 ret = mvneta_setup_txqs(pp);
1228 if (ret)
1229 return ret;
1230
1231 mvneta_adjust_link(dev);
1232
1233 mvneta_start_dev(pp);
1234
1235 return 0;
1236}
1237
1238/* Initialize hw */
Stefan Roesee3b9c982015-11-19 07:46:15 +01001239static int mvneta_init2(struct mvneta_port *pp)
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001240{
1241 int queue;
1242
1243 /* Disable port */
1244 mvneta_port_disable(pp);
1245
1246 /* Set port default values */
1247 mvneta_defaults_set(pp);
1248
1249 pp->txqs = kzalloc(txq_number * sizeof(struct mvneta_tx_queue),
1250 GFP_KERNEL);
1251 if (!pp->txqs)
1252 return -ENOMEM;
1253
1254 /* U-Boot special: use preallocated area */
1255 pp->txqs[0].descs = buffer_loc.tx_descs;
1256
1257 /* Initialize TX descriptor rings */
1258 for (queue = 0; queue < txq_number; queue++) {
1259 struct mvneta_tx_queue *txq = &pp->txqs[queue];
1260 txq->id = queue;
1261 txq->size = pp->tx_ring_size;
1262 }
1263
1264 pp->rxqs = kzalloc(rxq_number * sizeof(struct mvneta_rx_queue),
1265 GFP_KERNEL);
1266 if (!pp->rxqs) {
1267 kfree(pp->txqs);
1268 return -ENOMEM;
1269 }
1270
1271 /* U-Boot special: use preallocated area */
1272 pp->rxqs[0].descs = buffer_loc.rx_descs;
1273
1274 /* Create Rx descriptor rings */
1275 for (queue = 0; queue < rxq_number; queue++) {
1276 struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
1277 rxq->id = queue;
1278 rxq->size = pp->rx_ring_size;
1279 }
1280
1281 return 0;
1282}
1283
1284/* platform glue : initialize decoding windows */
Stefan Roese544eefe2016-05-19 17:46:36 +02001285
1286/*
1287 * Not like A380, in Armada3700, there are two layers of decode windows for GBE:
1288 * First layer is: GbE Address window that resides inside the GBE unit,
1289 * Second layer is: Fabric address window which is located in the NIC400
1290 * (South Fabric).
1291 * To simplify the address decode configuration for Armada3700, we bypass the
1292 * first layer of GBE decode window by setting the first window to 4GB.
1293 */
1294static void mvneta_bypass_mbus_windows(struct mvneta_port *pp)
1295{
1296 /*
1297 * Set window size to 4GB, to bypass GBE address decode, leave the
1298 * work to MBUS decode window
1299 */
1300 mvreg_write(pp, MVNETA_WIN_SIZE(0), MVNETA_WIN_SIZE_MASK);
1301
1302 /* Enable GBE address decode window 0 by set bit 0 to 0 */
1303 clrbits_le32(pp->base + MVNETA_BASE_ADDR_ENABLE,
1304 MVNETA_BASE_ADDR_ENABLE_BIT);
1305
1306 /* Set GBE address decode window 0 to full Access (read or write) */
1307 setbits_le32(pp->base + MVNETA_PORT_ACCESS_PROTECT,
1308 MVNETA_PORT_ACCESS_PROTECT_WIN0_RW);
1309}
1310
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001311static void mvneta_conf_mbus_windows(struct mvneta_port *pp)
1312{
1313 const struct mbus_dram_target_info *dram;
1314 u32 win_enable;
1315 u32 win_protect;
1316 int i;
1317
1318 dram = mvebu_mbus_dram_info();
1319 for (i = 0; i < 6; i++) {
1320 mvreg_write(pp, MVNETA_WIN_BASE(i), 0);
1321 mvreg_write(pp, MVNETA_WIN_SIZE(i), 0);
1322
1323 if (i < 4)
1324 mvreg_write(pp, MVNETA_WIN_REMAP(i), 0);
1325 }
1326
1327 win_enable = 0x3f;
1328 win_protect = 0;
1329
1330 for (i = 0; i < dram->num_cs; i++) {
1331 const struct mbus_dram_window *cs = dram->cs + i;
1332 mvreg_write(pp, MVNETA_WIN_BASE(i), (cs->base & 0xffff0000) |
1333 (cs->mbus_attr << 8) | dram->mbus_dram_target_id);
1334
1335 mvreg_write(pp, MVNETA_WIN_SIZE(i),
1336 (cs->size - 1) & 0xffff0000);
1337
1338 win_enable &= ~(1 << i);
1339 win_protect |= 3 << (2 * i);
1340 }
1341
1342 mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable);
1343}
1344
1345/* Power up the port */
1346static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
1347{
1348 u32 ctrl;
1349
1350 /* MAC Cause register should be cleared */
1351 mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0);
1352
1353 ctrl = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
1354
1355 /* Even though it might look weird, when we're configured in
1356 * SGMII or QSGMII mode, the RGMII bit needs to be set.
1357 */
1358 switch (phy_mode) {
1359 case PHY_INTERFACE_MODE_QSGMII:
1360 mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
1361 ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
1362 break;
1363 case PHY_INTERFACE_MODE_SGMII:
1364 mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
1365 ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
1366 break;
1367 case PHY_INTERFACE_MODE_RGMII:
1368 case PHY_INTERFACE_MODE_RGMII_ID:
1369 ctrl |= MVNETA_GMAC2_PORT_RGMII;
1370 break;
1371 default:
1372 return -EINVAL;
1373 }
1374
1375 /* Cancel Port Reset */
1376 ctrl &= ~MVNETA_GMAC2_PORT_RESET;
1377 mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl);
1378
1379 while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) &
1380 MVNETA_GMAC2_PORT_RESET) != 0)
1381 continue;
1382
1383 return 0;
1384}
1385
1386/* Device initialization routine */
Stefan Roesee3b9c982015-11-19 07:46:15 +01001387static int mvneta_init(struct udevice *dev)
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001388{
Stefan Roesee3b9c982015-11-19 07:46:15 +01001389 struct eth_pdata *pdata = dev_get_platdata(dev);
1390 struct mvneta_port *pp = dev_get_priv(dev);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001391 int err;
1392
1393 pp->tx_ring_size = MVNETA_MAX_TXD;
1394 pp->rx_ring_size = MVNETA_MAX_RXD;
1395
Stefan Roesee3b9c982015-11-19 07:46:15 +01001396 err = mvneta_init2(pp);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001397 if (err < 0) {
1398 dev_err(&pdev->dev, "can't init eth hal\n");
1399 return err;
1400 }
1401
Stefan Roesee3b9c982015-11-19 07:46:15 +01001402 mvneta_mac_addr_set(pp, pdata->enetaddr, rxq_def);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001403
1404 err = mvneta_port_power_up(pp, pp->phy_interface);
1405 if (err < 0) {
1406 dev_err(&pdev->dev, "can't power up port\n");
1407 return err;
1408 }
1409
1410 /* Call open() now as it needs to be done before runing send() */
1411 mvneta_open(dev);
1412
1413 return 0;
1414}
1415
1416/* U-Boot only functions follow here */
1417
1418/* SMI / MDIO functions */
1419
1420static int smi_wait_ready(struct mvneta_port *pp)
1421{
1422 u32 timeout = MVNETA_SMI_TIMEOUT;
1423 u32 smi_reg;
1424
1425 /* wait till the SMI is not busy */
1426 do {
1427 /* read smi register */
1428 smi_reg = mvreg_read(pp, MVNETA_SMI);
1429 if (timeout-- == 0) {
1430 printf("Error: SMI busy timeout\n");
1431 return -EFAULT;
1432 }
1433 } while (smi_reg & MVNETA_SMI_BUSY);
1434
1435 return 0;
1436}
1437
1438/*
Stefan Roesee3b9c982015-11-19 07:46:15 +01001439 * mvneta_mdio_read - miiphy_read callback function.
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001440 *
1441 * Returns 16bit phy register value, or 0xffff on error
1442 */
Stefan Roesee3b9c982015-11-19 07:46:15 +01001443static int mvneta_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001444{
Stefan Roesee3b9c982015-11-19 07:46:15 +01001445 struct mvneta_port *pp = bus->priv;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001446 u32 smi_reg;
1447 u32 timeout;
1448
1449 /* check parameters */
Stefan Roesee3b9c982015-11-19 07:46:15 +01001450 if (addr > MVNETA_PHY_ADDR_MASK) {
1451 printf("Error: Invalid PHY address %d\n", addr);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001452 return -EFAULT;
1453 }
1454
Stefan Roesee3b9c982015-11-19 07:46:15 +01001455 if (reg > MVNETA_PHY_REG_MASK) {
1456 printf("Err: Invalid register offset %d\n", reg);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001457 return -EFAULT;
1458 }
1459
1460 /* wait till the SMI is not busy */
1461 if (smi_wait_ready(pp) < 0)
1462 return -EFAULT;
1463
1464 /* fill the phy address and regiser offset and read opcode */
Stefan Roesee3b9c982015-11-19 07:46:15 +01001465 smi_reg = (addr << MVNETA_SMI_DEV_ADDR_OFFS)
1466 | (reg << MVNETA_SMI_REG_ADDR_OFFS)
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001467 | MVNETA_SMI_OPCODE_READ;
1468
1469 /* write the smi register */
1470 mvreg_write(pp, MVNETA_SMI, smi_reg);
1471
Stefan Roesee3b9c982015-11-19 07:46:15 +01001472 /* wait till read value is ready */
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001473 timeout = MVNETA_SMI_TIMEOUT;
1474
1475 do {
1476 /* read smi register */
1477 smi_reg = mvreg_read(pp, MVNETA_SMI);
1478 if (timeout-- == 0) {
1479 printf("Err: SMI read ready timeout\n");
1480 return -EFAULT;
1481 }
1482 } while (!(smi_reg & MVNETA_SMI_READ_VALID));
1483
1484 /* Wait for the data to update in the SMI register */
1485 for (timeout = 0; timeout < MVNETA_SMI_TIMEOUT; timeout++)
1486 ;
1487
Stefan Roesee3b9c982015-11-19 07:46:15 +01001488 return mvreg_read(pp, MVNETA_SMI) & MVNETA_SMI_DATA_MASK;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001489}
1490
1491/*
Stefan Roesee3b9c982015-11-19 07:46:15 +01001492 * mvneta_mdio_write - miiphy_write callback function.
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001493 *
1494 * Returns 0 if write succeed, -EINVAL on bad parameters
1495 * -ETIME on timeout
1496 */
Stefan Roesee3b9c982015-11-19 07:46:15 +01001497static int mvneta_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
1498 u16 value)
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001499{
Stefan Roesee3b9c982015-11-19 07:46:15 +01001500 struct mvneta_port *pp = bus->priv;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001501 u32 smi_reg;
1502
1503 /* check parameters */
Stefan Roesee3b9c982015-11-19 07:46:15 +01001504 if (addr > MVNETA_PHY_ADDR_MASK) {
1505 printf("Error: Invalid PHY address %d\n", addr);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001506 return -EFAULT;
1507 }
1508
Stefan Roesee3b9c982015-11-19 07:46:15 +01001509 if (reg > MVNETA_PHY_REG_MASK) {
1510 printf("Err: Invalid register offset %d\n", reg);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001511 return -EFAULT;
1512 }
1513
1514 /* wait till the SMI is not busy */
1515 if (smi_wait_ready(pp) < 0)
1516 return -EFAULT;
1517
1518 /* fill the phy addr and reg offset and write opcode and data */
Stefan Roesee3b9c982015-11-19 07:46:15 +01001519 smi_reg = value << MVNETA_SMI_DATA_OFFS;
1520 smi_reg |= (addr << MVNETA_SMI_DEV_ADDR_OFFS)
1521 | (reg << MVNETA_SMI_REG_ADDR_OFFS);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001522 smi_reg &= ~MVNETA_SMI_OPCODE_READ;
1523
1524 /* write the smi register */
1525 mvreg_write(pp, MVNETA_SMI, smi_reg);
1526
1527 return 0;
1528}
1529
Stefan Roesee3b9c982015-11-19 07:46:15 +01001530static int mvneta_start(struct udevice *dev)
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001531{
Stefan Roesee3b9c982015-11-19 07:46:15 +01001532 struct mvneta_port *pp = dev_get_priv(dev);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001533 struct phy_device *phydev;
1534
1535 mvneta_port_power_up(pp, pp->phy_interface);
1536
1537 if (!pp->init || pp->link == 0) {
Konstantin Porotchkin278d30c2017-02-16 13:52:28 +02001538 if (mvneta_port_is_fixed_link(pp)) {
1539 u32 val;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001540
Konstantin Porotchkin278d30c2017-02-16 13:52:28 +02001541 pp->init = 1;
1542 pp->link = 1;
1543 mvneta_init(dev);
1544
1545 val = MVNETA_GMAC_FORCE_LINK_UP |
1546 MVNETA_GMAC_IB_BYPASS_AN_EN |
1547 MVNETA_GMAC_SET_FC_EN |
1548 MVNETA_GMAC_ADVERT_FC_EN |
1549 MVNETA_GMAC_SAMPLE_TX_CFG_EN;
1550
1551 if (pp->duplex)
1552 val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
1553
1554 if (pp->speed == SPEED_1000)
1555 val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
1556 else if (pp->speed == SPEED_100)
1557 val |= MVNETA_GMAC_CONFIG_MII_SPEED;
1558
1559 mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
1560 } else {
1561 /* Set phy address of the port */
1562 mvreg_write(pp, MVNETA_PHY_ADDR, pp->phyaddr);
1563
1564 phydev = phy_connect(pp->bus, pp->phyaddr, dev,
1565 pp->phy_interface);
Marek Behúncf2cf852018-04-24 17:21:29 +02001566 if (!phydev) {
1567 printf("phy_connect failed\n");
1568 return -ENODEV;
1569 }
Konstantin Porotchkin278d30c2017-02-16 13:52:28 +02001570
1571 pp->phydev = phydev;
1572 phy_config(phydev);
1573 phy_startup(phydev);
1574 if (!phydev->link) {
1575 printf("%s: No link.\n", phydev->dev->name);
1576 return -1;
1577 }
1578
1579 /* Full init on first call */
1580 mvneta_init(dev);
1581 pp->init = 1;
1582 return 0;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001583 }
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001584 }
1585
Konstantin Porotchkin278d30c2017-02-16 13:52:28 +02001586 /* Upon all following calls, this is enough */
1587 mvneta_port_up(pp);
1588 mvneta_port_enable(pp);
1589
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001590 return 0;
1591}
1592
Stefan Roesee3b9c982015-11-19 07:46:15 +01001593static int mvneta_send(struct udevice *dev, void *packet, int length)
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001594{
Stefan Roesee3b9c982015-11-19 07:46:15 +01001595 struct mvneta_port *pp = dev_get_priv(dev);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001596 struct mvneta_tx_queue *txq = &pp->txqs[0];
1597 struct mvneta_tx_desc *tx_desc;
1598 int sent_desc;
1599 u32 timeout = 0;
1600
1601 /* Get a descriptor for the first part of the packet */
1602 tx_desc = mvneta_txq_next_desc_get(txq);
1603
Stefan Roese3cbc11d2016-05-19 18:09:17 +02001604 tx_desc->buf_phys_addr = (u32)(uintptr_t)packet;
Stefan Roesee3b9c982015-11-19 07:46:15 +01001605 tx_desc->data_size = length;
Stefan Roese3cbc11d2016-05-19 18:09:17 +02001606 flush_dcache_range((ulong)packet,
1607 (ulong)packet + ALIGN(length, PKTALIGN));
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001608
1609 /* First and Last descriptor */
1610 tx_desc->command = MVNETA_TX_L4_CSUM_NOT | MVNETA_TXD_FLZ_DESC;
1611 mvneta_txq_pend_desc_add(pp, txq, 1);
1612
1613 /* Wait for packet to be sent (queue might help with speed here) */
1614 sent_desc = mvneta_txq_sent_desc_num_get(pp, txq);
1615 while (!sent_desc) {
1616 if (timeout++ > 10000) {
1617 printf("timeout: packet not sent\n");
1618 return -1;
1619 }
1620 sent_desc = mvneta_txq_sent_desc_num_get(pp, txq);
1621 }
1622
1623 /* txDone has increased - hw sent packet */
1624 mvneta_txq_sent_desc_dec(pp, txq, sent_desc);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001625
1626 return 0;
1627}
1628
Stefan Roesee3b9c982015-11-19 07:46:15 +01001629static int mvneta_recv(struct udevice *dev, int flags, uchar **packetp)
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001630{
Stefan Roesee3b9c982015-11-19 07:46:15 +01001631 struct mvneta_port *pp = dev_get_priv(dev);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001632 int rx_done;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001633 struct mvneta_rx_queue *rxq;
Stefan Roesee3b9c982015-11-19 07:46:15 +01001634 int rx_bytes = 0;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001635
1636 /* get rx queue */
1637 rxq = mvneta_rxq_handle_get(pp, rxq_def);
1638 rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001639
Stefan Roesee3b9c982015-11-19 07:46:15 +01001640 if (rx_done) {
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001641 struct mvneta_rx_desc *rx_desc;
1642 unsigned char *data;
1643 u32 rx_status;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001644
1645 /*
1646 * No cache invalidation needed here, since the desc's are
1647 * located in a uncached memory region
1648 */
1649 rx_desc = mvneta_rxq_next_desc_get(rxq);
1650
1651 rx_status = rx_desc->status;
1652 if (!mvneta_rxq_desc_is_first_last(rx_status) ||
1653 (rx_status & MVNETA_RXD_ERR_SUMMARY)) {
1654 mvneta_rx_error(pp, rx_desc);
1655 /* leave the descriptor untouched */
Stefan Roesee3b9c982015-11-19 07:46:15 +01001656 return -EIO;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001657 }
1658
1659 /* 2 bytes for marvell header. 4 bytes for crc */
1660 rx_bytes = rx_desc->data_size - 6;
1661
1662 /* give packet to stack - skip on first 2 bytes */
Stefan Roese3cbc11d2016-05-19 18:09:17 +02001663 data = (u8 *)(uintptr_t)rx_desc->buf_cookie + 2;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001664 /*
1665 * No cache invalidation needed here, since the rx_buffer's are
1666 * located in a uncached memory region
1667 */
Stefan Roesee3b9c982015-11-19 07:46:15 +01001668 *packetp = data;
1669
Jason Brown32ac8b02017-11-28 11:12:43 -08001670 /*
1671 * Only mark one descriptor as free
1672 * since only one was processed
1673 */
1674 mvneta_rxq_desc_num_update(pp, rxq, 1, 1);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001675 }
1676
Stefan Roesee3b9c982015-11-19 07:46:15 +01001677 return rx_bytes;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001678}
1679
Stefan Roesee3b9c982015-11-19 07:46:15 +01001680static int mvneta_probe(struct udevice *dev)
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001681{
Stefan Roesee3b9c982015-11-19 07:46:15 +01001682 struct eth_pdata *pdata = dev_get_platdata(dev);
1683 struct mvneta_port *pp = dev_get_priv(dev);
1684 void *blob = (void *)gd->fdt_blob;
Simon Glasse160f7d2017-01-17 16:52:55 -07001685 int node = dev_of_offset(dev);
Stefan Roesee3b9c982015-11-19 07:46:15 +01001686 struct mii_dev *bus;
1687 unsigned long addr;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001688 void *bd_space;
Konstantin Porotchkin976feda2017-02-16 13:52:27 +02001689 int ret;
Konstantin Porotchkin278d30c2017-02-16 13:52:28 +02001690 int fl_node;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001691
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001692 /*
1693 * Allocate buffer area for descs and rx_buffers. This is only
1694 * done once for all interfaces. As only one interface can
Chris Packham6723b232016-08-29 20:54:02 +12001695 * be active. Make this area DMA safe by disabling the D-cache
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001696 */
1697 if (!buffer_loc.tx_descs) {
Jon Nettleton199b27b2018-05-30 08:52:29 +03001698 u32 size;
1699
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001700 /* Align buffer area for descs and rx_buffers to 1MiB */
1701 bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE);
Rabeeh Khoury0f8888b2018-06-19 21:36:50 +03001702 flush_dcache_range((ulong)bd_space, (ulong)bd_space + BD_SPACE);
Stefan Roese3cbc11d2016-05-19 18:09:17 +02001703 mmu_set_region_dcache_behaviour((phys_addr_t)bd_space, BD_SPACE,
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001704 DCACHE_OFF);
1705 buffer_loc.tx_descs = (struct mvneta_tx_desc *)bd_space;
Jon Nettleton199b27b2018-05-30 08:52:29 +03001706 size = roundup(MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc),
1707 ARCH_DMA_MINALIGN);
Rabeeh Khoury318b5d72018-06-19 21:36:51 +03001708 memset(buffer_loc.tx_descs, 0, size);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001709 buffer_loc.rx_descs = (struct mvneta_rx_desc *)
Jon Nettleton199b27b2018-05-30 08:52:29 +03001710 ((phys_addr_t)bd_space + size);
1711 size += roundup(MVNETA_MAX_RXD * sizeof(struct mvneta_rx_desc),
1712 ARCH_DMA_MINALIGN);
1713 buffer_loc.rx_buffers = (phys_addr_t)(bd_space + size);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001714 }
1715
Stefan Roesee3b9c982015-11-19 07:46:15 +01001716 pp->base = (void __iomem *)pdata->iobase;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001717
Stefan Roesee3b9c982015-11-19 07:46:15 +01001718 /* Configure MBUS address windows */
Simon Glass911f3ae2017-05-18 20:08:57 -06001719 if (device_is_compatible(dev, "marvell,armada-3700-neta"))
Stefan Roese544eefe2016-05-19 17:46:36 +02001720 mvneta_bypass_mbus_windows(pp);
1721 else
1722 mvneta_conf_mbus_windows(pp);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001723
Stefan Roesee3b9c982015-11-19 07:46:15 +01001724 /* PHY interface is already decoded in mvneta_ofdata_to_platdata() */
1725 pp->phy_interface = pdata->phy_interface;
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001726
Konstantin Porotchkin278d30c2017-02-16 13:52:28 +02001727 /* fetch 'fixed-link' property from 'neta' node */
1728 fl_node = fdt_subnode_offset(blob, node, "fixed-link");
1729 if (fl_node != -FDT_ERR_NOTFOUND) {
1730 /* set phy_addr to invalid value for fixed link */
1731 pp->phyaddr = PHY_MAX_ADDR + 1;
1732 pp->duplex = fdtdec_get_bool(blob, fl_node, "full-duplex");
1733 pp->speed = fdtdec_get_int(blob, fl_node, "speed", 0);
1734 } else {
1735 /* Now read phyaddr from DT */
1736 addr = fdtdec_get_int(blob, node, "phy", 0);
1737 addr = fdt_node_offset_by_phandle(blob, addr);
1738 pp->phyaddr = fdtdec_get_int(blob, addr, "reg", 0);
1739 }
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001740
Stefan Roesee3b9c982015-11-19 07:46:15 +01001741 bus = mdio_alloc();
1742 if (!bus) {
1743 printf("Failed to allocate MDIO bus\n");
1744 return -ENOMEM;
1745 }
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001746
Stefan Roesee3b9c982015-11-19 07:46:15 +01001747 bus->read = mvneta_mdio_read;
1748 bus->write = mvneta_mdio_write;
1749 snprintf(bus->name, sizeof(bus->name), dev->name);
1750 bus->priv = (void *)pp;
1751 pp->bus = bus;
1752
Konstantin Porotchkin976feda2017-02-16 13:52:27 +02001753 ret = mdio_register(bus);
1754 if (ret)
1755 return ret;
1756
Simon Glassbcee8d62019-12-06 21:41:35 -07001757#if CONFIG_IS_ENABLED(DM_GPIO)
Aditya Prayoga18bfc8f2018-12-05 00:39:23 +08001758 gpio_request_by_name(dev, "phy-reset-gpios", 0,
1759 &pp->phy_reset_gpio, GPIOD_IS_OUT);
1760
1761 if (dm_gpio_is_valid(&pp->phy_reset_gpio)) {
1762 dm_gpio_set_value(&pp->phy_reset_gpio, 1);
1763 mdelay(10);
1764 dm_gpio_set_value(&pp->phy_reset_gpio, 0);
1765 }
1766#endif
1767
Konstantin Porotchkin976feda2017-02-16 13:52:27 +02001768 return board_network_enable(bus);
Stefan Roese19fc2ea2014-10-22 12:13:14 +02001769}
Stefan Roesee3b9c982015-11-19 07:46:15 +01001770
1771static void mvneta_stop(struct udevice *dev)
1772{
1773 struct mvneta_port *pp = dev_get_priv(dev);
1774
1775 mvneta_port_down(pp);
1776 mvneta_port_disable(pp);
1777}
1778
1779static const struct eth_ops mvneta_ops = {
1780 .start = mvneta_start,
1781 .send = mvneta_send,
1782 .recv = mvneta_recv,
1783 .stop = mvneta_stop,
Matt Pelland0a85f022018-03-27 13:18:25 -04001784 .write_hwaddr = mvneta_write_hwaddr,
Stefan Roesee3b9c982015-11-19 07:46:15 +01001785};
1786
1787static int mvneta_ofdata_to_platdata(struct udevice *dev)
1788{
1789 struct eth_pdata *pdata = dev_get_platdata(dev);
1790 const char *phy_mode;
1791
Simon Glassa821c4a2017-05-17 17:18:05 -06001792 pdata->iobase = devfdt_get_addr(dev);
Stefan Roesee3b9c982015-11-19 07:46:15 +01001793
1794 /* Get phy-mode / phy_interface from DT */
1795 pdata->phy_interface = -1;
Simon Glasse160f7d2017-01-17 16:52:55 -07001796 phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
1797 NULL);
Stefan Roesee3b9c982015-11-19 07:46:15 +01001798 if (phy_mode)
1799 pdata->phy_interface = phy_get_interface_by_name(phy_mode);
1800 if (pdata->phy_interface == -1) {
1801 debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
1802 return -EINVAL;
1803 }
1804
1805 return 0;
1806}
1807
1808static const struct udevice_id mvneta_ids[] = {
1809 { .compatible = "marvell,armada-370-neta" },
1810 { .compatible = "marvell,armada-xp-neta" },
Stefan Roese544eefe2016-05-19 17:46:36 +02001811 { .compatible = "marvell,armada-3700-neta" },
Stefan Roesee3b9c982015-11-19 07:46:15 +01001812 { }
1813};
1814
1815U_BOOT_DRIVER(mvneta) = {
1816 .name = "mvneta",
1817 .id = UCLASS_ETH,
1818 .of_match = mvneta_ids,
1819 .ofdata_to_platdata = mvneta_ofdata_to_platdata,
1820 .probe = mvneta_probe,
1821 .ops = &mvneta_ops,
1822 .priv_auto_alloc_size = sizeof(struct mvneta_port),
1823 .platdata_auto_alloc_size = sizeof(struct eth_pdata),
1824};