blob: dc0be7ce3bd6d1a39b48cbdbff307a9fde8d7190 [file] [log] [blame]
Heiko Schocher5990b052020-02-03 10:23:53 +01001// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (C) 2006 Freescale Semiconductor, Inc.
4 *
5 * Dave Liu <daveliu@freescale.com>
6 * based on source code of Shlomi Gridish
7 */
8
9#include <common.h>
10#include <linux/errno.h>
11#include <asm/io.h>
12#include <asm/immap_83xx.h>
13
14#if defined(CONFIG_PINCTRL)
15#include <dm.h>
16#include <dm/device_compat.h>
17#include <dm/pinctrl.h>
18#include <linux/ioport.h>
19
20/**
Simon Glass8a8d24b2020-12-03 16:55:23 -070021 * struct qe_io_plat
Heiko Schocher5990b052020-02-03 10:23:53 +010022 *
23 * @base: Base register address
24 * @num_par_io_ports number of io ports
25 */
Simon Glass8a8d24b2020-12-03 16:55:23 -070026struct qe_io_plat {
Heiko Schocher5990b052020-02-03 10:23:53 +010027 qepio83xx_t *base;
28 u32 num_io_ports;
29};
30#endif
31
32#define NUM_OF_PINS 32
33
34/** qe_cfg_iopin configure one io pin setting
35 *
36 * @par_io: pointer to parallel I/O base
37 * @port: io pin port
38 * @pin: io pin number which get configured
39 * @dir: direction of io pin 2 bits valid
40 * 00 = pin disabled
41 * 01 = output
42 * 10 = input
43 * 11 = pin is I/O
44 * @open_drain: is pin open drain
45 * @assign: pin assignment registers select the function of the pin
46 */
47static void qe_cfg_iopin(qepio83xx_t *par_io, u8 port, u8 pin, int dir,
48 int open_drain, int assign)
49{
50 u32 dbit_mask;
51 u32 dbit_dir;
52 u32 dbit_asgn;
53 u32 bit_mask;
54 u32 tmp_val;
55 int offset;
56
57 offset = (NUM_OF_PINS - (pin % (NUM_OF_PINS / 2) + 1) * 2);
58
59 /* Calculate pin location and 2bit mask and dir */
60 dbit_mask = (u32)(0x3 << offset);
61 dbit_dir = (u32)(dir << offset);
62
63 /* Setup the direction */
64 tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
65 in_be32(&par_io->ioport[port].dir2) :
66 in_be32(&par_io->ioport[port].dir1);
67
68 if (pin > (NUM_OF_PINS / 2) - 1) {
69 out_be32(&par_io->ioport[port].dir2, ~dbit_mask & tmp_val);
70 out_be32(&par_io->ioport[port].dir2, dbit_dir | tmp_val);
71 } else {
72 out_be32(&par_io->ioport[port].dir1, ~dbit_mask & tmp_val);
73 out_be32(&par_io->ioport[port].dir1, dbit_dir | tmp_val);
74 }
75
76 /* Calculate pin location for 1bit mask */
77 bit_mask = (u32)(1 << (NUM_OF_PINS - (pin + 1)));
78
79 /* Setup the open drain */
80 tmp_val = in_be32(&par_io->ioport[port].podr);
81 if (open_drain)
82 out_be32(&par_io->ioport[port].podr, bit_mask | tmp_val);
83 else
84 out_be32(&par_io->ioport[port].podr, ~bit_mask & tmp_val);
85
86 /* Setup the assignment */
87 tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
88 in_be32(&par_io->ioport[port].ppar2) :
89 in_be32(&par_io->ioport[port].ppar1);
90 dbit_asgn = (u32)(assign << offset);
91
92 /* Clear and set 2 bits mask */
93 if (pin > (NUM_OF_PINS / 2) - 1) {
94 out_be32(&par_io->ioport[port].ppar2, ~dbit_mask & tmp_val);
95 out_be32(&par_io->ioport[port].ppar2, dbit_asgn | tmp_val);
96 } else {
97 out_be32(&par_io->ioport[port].ppar1, ~dbit_mask & tmp_val);
98 out_be32(&par_io->ioport[port].ppar1, dbit_asgn | tmp_val);
99 }
100}
101
102#if !defined(CONFIG_PINCTRL)
103/** qe_config_iopin configure one io pin setting
104 *
105 * @port: io pin port
106 * @pin: io pin number which get configured
107 * @dir: direction of io pin 2 bits valid
108 * 00 = pin disabled
109 * 01 = output
110 * 10 = input
111 * 11 = pin is I/O
112 * @open_drain: is pin open drain
113 * @assign: pin assignment registers select the function of the pin
114 */
115void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
116{
117 immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
118 qepio83xx_t *par_io = (qepio83xx_t *)&im->qepio;
119
120 qe_cfg_iopin(par_io, port, pin, dir, open_drain, assign);
121}
122#else
Simon Glassd1998a92020-12-03 16:55:21 -0700123static int qe_io_of_to_plat(struct udevice *dev)
Heiko Schocher5990b052020-02-03 10:23:53 +0100124{
Simon Glass0fd3d912020-12-22 19:30:28 -0700125 struct qe_io_plat *plat = dev_get_plat(dev);
Heiko Schocher5990b052020-02-03 10:23:53 +0100126 fdt_addr_t addr;
127
128 addr = dev_read_addr(dev);
129 if (addr == FDT_ADDR_T_NONE)
130 return -EINVAL;
131
132 plat->base = (qepio83xx_t *)addr;
133 if (dev_read_u32(dev, "num-ports", &plat->num_io_ports))
134 return -EINVAL;
135
136 return 0;
137}
138
139/**
140 * par_io_of_config_node config
141 * @dev: pointer to pinctrl device
142 * @pio: ofnode of pinconfig property
143 */
144static int par_io_of_config_node(struct udevice *dev, ofnode pio)
145{
Simon Glass0fd3d912020-12-22 19:30:28 -0700146 struct qe_io_plat *plat = dev_get_plat(dev);
Heiko Schocher5990b052020-02-03 10:23:53 +0100147 qepio83xx_t *par_io = plat->base;
148 const unsigned int *pio_map;
149 int pio_map_len;
150
151 pio_map = ofnode_get_property(pio, "pio-map", &pio_map_len);
152 if (!pio_map)
153 return -ENOENT;
154
155 pio_map_len /= sizeof(unsigned int);
156 if ((pio_map_len % 6) != 0) {
157 dev_err(dev, "%s: pio-map format wrong!\n", __func__);
158 return -EINVAL;
159 }
160
161 while (pio_map_len > 0) {
162 /*
163 * column pio_map[5] from linux (has_irq) not
164 * supported in u-boot yet.
165 */
166 qe_cfg_iopin(par_io, (u8)pio_map[0], (u8)pio_map[1],
167 (int)pio_map[2], (int)pio_map[3],
168 (int)pio_map[4]);
169 pio_map += 6;
170 pio_map_len -= 6;
171 }
172 return 0;
173}
174
175int par_io_of_config(struct udevice *dev)
176{
177 u32 phandle;
178 ofnode pio;
179 int err;
180
181 err = ofnode_read_u32(dev_ofnode(dev), "pio-handle", &phandle);
182 if (err) {
183 dev_err(dev, "%s: pio-handle not available\n", __func__);
184 return err;
185 }
186
187 pio = ofnode_get_by_phandle(phandle);
188 if (!ofnode_valid(pio)) {
189 dev_err(dev, "%s: unable to find node\n", __func__);
190 return -EINVAL;
191 }
192
193 /* To Do: find pinctrl device and pass it */
194 return par_io_of_config_node(NULL, pio);
195}
196
197/*
198 * This is not nice!
199 * pinsettings should work with "pinctrl-" properties.
200 * Unfortunately on mpc83xx powerpc linux device trees
201 * devices handle this with "pio-handle" properties ...
202 *
203 * Even worser, old board code inits all par_io
204 * pins in one step, if U-Boot uses the device
205 * or not. So init all par_io definitions here too
206 * as linux does this also.
207 */
208static void config_qe_ioports(struct udevice *dev)
209{
210 ofnode ofn;
211
212 for (ofn = dev_read_first_subnode(dev); ofnode_valid(ofn);
213 ofn = dev_read_next_subnode(ofn)) {
214 /*
215 * ignore errors here, as may the subnode
216 * has no pio-handle
217 */
218 par_io_of_config_node(dev, ofn);
219 }
220}
221
222static int par_io_pinctrl_probe(struct udevice *dev)
223{
224 config_qe_ioports(dev);
225
226 return 0;
227}
228
229static int par_io_pinctrl_set_state(struct udevice *dev, struct udevice *config)
230{
231 return 0;
232}
233
234const struct pinctrl_ops par_io_pinctrl_ops = {
235 .set_state = par_io_pinctrl_set_state,
236};
237
238static const struct udevice_id par_io_pinctrl_match[] = {
239 { .compatible = "fsl,mpc8360-par_io"},
240 { /* sentinel */ }
241};
242
243U_BOOT_DRIVER(par_io_pinctrl) = {
244 .name = "par-io-pinctrl",
245 .id = UCLASS_PINCTRL,
246 .of_match = of_match_ptr(par_io_pinctrl_match),
247 .probe = par_io_pinctrl_probe,
Simon Glassd1998a92020-12-03 16:55:21 -0700248 .of_to_plat = qe_io_of_to_plat,
Simon Glass8a8d24b2020-12-03 16:55:23 -0700249 .plat_auto = sizeof(struct qe_io_plat),
Heiko Schocher5990b052020-02-03 10:23:53 +0100250 .ops = &par_io_pinctrl_ops,
Simon Glass414cc152021-08-07 07:24:03 -0600251#if CONFIG_IS_ENABLED(OF_REAL)
Heiko Schocher5990b052020-02-03 10:23:53 +0100252 .flags = DM_FLAG_PRE_RELOC,
253#endif
254};
255#endif