blob: 1550fee1ec68044d7f6391f163490a3ed7378b75 [file] [log] [blame]
Hans de Goede66ab5282016-07-09 22:20:00 +02001/*
2 * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/input/input.h>
49#include <dt-bindings/pinctrl/sun4i-a10.h>
50
51/ {
52 model = "Xunlong Orange Pi Lite";
53 compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3";
54
55 aliases {
56 /* The H3 emac is not used so the wifi is ethernet0 */
Hans de Goede860fbdd2016-08-18 20:51:12 +020057 ethernet0 = &rtl8189ftv;
Hans de Goede66ab5282016-07-09 22:20:00 +020058 serial0 = &uart0;
59 };
60
61 chosen {
62 stdout-path = "serial0:115200n8";
63 };
64
65 leds {
66 compatible = "gpio-leds";
67 pinctrl-names = "default";
68 pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
69
70 pwr_led {
71 label = "orangepi:green:pwr";
72 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
73 default-state = "on";
74 };
75
76 status_led {
77 label = "orangepi:red:status";
78 gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
79 };
80 };
81
82 r_gpio_keys {
83 compatible = "gpio-keys";
84 pinctrl-names = "default";
85 pinctrl-0 = <&sw_r_opc>;
86
87 sw4 {
88 label = "sw4";
89 linux,code = <BTN_0>;
90 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
91 };
92 };
93};
94
95&ehci1 {
96 status = "okay";
97};
98
99&ehci2 {
100 status = "okay";
101};
102
103&ir {
104 pinctrl-names = "default";
105 pinctrl-0 = <&ir_pins_a>;
106 status = "okay";
107};
108
109&mmc0 {
110 pinctrl-names = "default";
111 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
112 vmmc-supply = <&reg_vcc3v3>;
113 bus-width = <4>;
114 cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
115 cd-inverted;
116 status = "okay";
117};
118
119&mmc1 {
120 pinctrl-names = "default";
121 pinctrl-0 = <&mmc1_pins_a>;
122 vmmc-supply = <&reg_vcc3v3>;
123 bus-width = <4>;
124 non-removable;
125 status = "okay";
126
127 /*
128 * Explicitly define the sdio device, so that we can add an ethernet
129 * alias for it (which e.g. makes u-boot set a mac-address).
130 */
131 rtl8189ftv: sdio_wifi@1 {
132 reg = <1>;
133 };
134};
135
136&ohci1 {
137 status = "okay";
138};
139
140&ohci2 {
141 status = "okay";
142};
143
144&pio {
145 leds_opc: led_pins@0 {
146 allwinner,pins = "PA15";
147 allwinner,function = "gpio_out";
148 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
149 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
150 };
151};
152
153&r_pio {
154 leds_r_opc: led_pins@0 {
155 allwinner,pins = "PL10";
156 allwinner,function = "gpio_out";
157 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
158 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
159 };
160
161 sw_r_opc: key_pins@0 {
162 allwinner,pins = "PL3";
163 allwinner,function = "gpio_in";
164 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
165 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
166 };
167};
168
169&uart0 {
170 pinctrl-names = "default";
171 pinctrl-0 = <&uart0_pins_a>;
172 status = "okay";
173};
174
175&usbphy {
176 /* USB VBUS is always on */
177 status = "okay";
178};