Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 82cafee133ee5c087449761988c096fc26a17cf6 / . / arch / arm / dts / imx6dl-riotboard.dts
blob: e7d9bfbfd0e4d5b6a7d0cce0c061020f93507e7e [file] [log] [blame]
Peter Robinsonebea3e02021-04-02 15:52:26 +0100[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright 2014 Iain Paton <ipaton0@gmail.com>
4 */
5
6/dts-v1/;
7#include "imx6dl.dtsi"
8#include <dt-bindings/gpio/gpio.h>
9
10/ {
11 model = "RIoTboard i.MX6S";
12 compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
13
14 memory@10000000 {
15 device_type = "memory";
16 reg = <0x10000000 0x40000000>;
17 };
18
19 chosen {
20 stdout-path = "serial1:115200n8";
21 };
22
23 leds {
24 compatible = "gpio-leds";
25 pinctrl-names = "default";
26 pinctrl-0 = <&pinctrl_led>;
27
28 led0: user1 {
29 label = "user1";
30 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
31 default-state = "on";
32 linux,default-trigger = "heartbeat";
33 };
34
35 led1: user2 {
36 label = "user2";
37 gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
38 default-state = "off";
39 };
40 };
41
42 sound {
43 compatible = "fsl,imx-audio-sgtl5000";
44 model = "imx6-riotboard-sgtl5000";
45 ssi-controller = <&ssi1>;
46 audio-codec = <&codec>;
47 audio-routing =
48 "MIC_IN", "Mic Jack",
49 "Mic Jack", "Mic Bias",
50 "Headphone Jack", "HP_OUT";
51 mux-int-port = <1>;
52 mux-ext-port = <3>;
53 };
54
55 reg_2p5v: regulator-2p5v {
56 compatible = "regulator-fixed";
57 regulator-name = "2P5V";
58 regulator-min-microvolt = <2500000>;
59 regulator-max-microvolt = <2500000>;
60 };
61
62 reg_3p3v: regulator-3p3v {
63 compatible = "regulator-fixed";
64 regulator-name = "3P3V";
65 regulator-min-microvolt = <3300000>;
66 regulator-max-microvolt = <3300000>;
67 };
68
69 reg_usb_otg_vbus: regulator-usbotgvbus {
70 compatible = "regulator-fixed";
71 regulator-name = "usb_otg_vbus";
72 regulator-min-microvolt = <5000000>;
73 regulator-max-microvolt = <5000000>;
74 gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
75 };
76};
77
78&audmux {
79 pinctrl-names = "default";
80 pinctrl-0 = <&pinctrl_audmux>;
81 status = "okay";
82};
83
84&clks {
85 fsl,pmic-stby-poweroff;
86};
87
88&fec {
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_enet>;
91 phy-mode = "rgmii-id";
92 phy-handle = <&rgmii_phy>;
93 interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
94 <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
95 fsl,err006687-workaround-present;
96 status = "okay";
97
98 mdio {
99 #address-cells = <1>;
100 #size-cells = <0>;
101
102 /* Atheros AR8035 PHY */
103 rgmii_phy: ethernet-phy@4 {
104 reg = <4>;
105 interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
106 reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
107 reset-assert-us = <10000>;
108 reset-deassert-us = <1000>;
Marcel Ziswilerd0399a42022-07-21 15:27:26 +0200[diff] [blame]109 qca,smarteee-tw-us-1g = <24>;
110 qca,clk-out-frequency = <125000000>;
Peter Robinsonebea3e02021-04-02 15:52:26 +0100[diff] [blame]111 };
112 };
113};
114
115&gpio1 {
116 gpio-line-names =
117 "", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL",
118 "I2C3_SDA", "I2C4_SCL",
119 "I2C4_SDA", "", "", "", "", "", "", "",
120 "", "PWM3", "", "", "", "", "", "",
121 "", "", "", "", "", "", "", "";
122};
123
124&gpio3 {
125 gpio-line-names =
126 "", "", "", "", "", "", "", "",
127 "", "", "", "", "", "", "", "",
128 "", "", "", "", "", "", "USB_OTG_VBUS", "",
129 "UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", "";
130};
131
132&gpio4 {
133 gpio-line-names =
134 "", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
135 "UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
136 "GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
137 "CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
138 "CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
139 "CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
140};
141
142&gpio5 {
143 gpio-line-names =
144 "", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06",
145 "GPIO5_07",
146 "GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
147 "CSPI2_CS0", "CSPI2_CLK", "", "",
148 "", "", "", "", "", "", "", "",
149 "", "", "", "", "", "", "", "";
150};
151
152&gpio7 {
153 gpio-line-names =
154 "SD3_CD", "SD3_WP", "", "", "", "", "", "",
155 "", "", "", "", "", "", "", "",
156 "", "", "", "", "", "", "", "",
157 "", "", "", "", "", "", "", "";
158};
159
160&hdmi {
161 ddc-i2c-bus = <&i2c2>;
162 status = "okay";
163};
164
165&i2c1 {
166 clock-frequency = <100000>;
167 pinctrl-names = "default";
168 pinctrl-0 = <&pinctrl_i2c1>;
169 status = "okay";
170
171 codec: sgtl5000@a {
172 compatible = "fsl,sgtl5000";
173 reg = <0x0a>;
174 clocks = <&clks IMX6QDL_CLK_CKO>;
175 VDDA-supply = <&reg_2p5v>;
176 VDDIO-supply = <&reg_3p3v>;
177 };
178
179 pmic: pf0100@8 {
180 compatible = "fsl,pfuze100";
181 reg = <0x08>;
182 interrupt-parent = <&gpio5>;
183 interrupts = <16 8>;
184 fsl,pmic-stby-poweroff;
185
186 regulators {
187 reg_vddcore: sw1ab { /* VDDARM_IN */
188 regulator-min-microvolt = <300000>;
189 regulator-max-microvolt = <1875000>;
190 regulator-always-on;
191 };
192
193 reg_vddsoc: sw1c { /* VDDSOC_IN */
194 regulator-min-microvolt = <300000>;
195 regulator-max-microvolt = <1875000>;
196 regulator-always-on;
197 };
198
199 reg_gen_3v3: sw2 { /* VDDHIGH_IN */
200 regulator-min-microvolt = <800000>;
201 regulator-max-microvolt = <3300000>;
202 regulator-always-on;
203 };
204
205 reg_ddr_1v5a: sw3a { /* NVCC_DRAM, NVCC_RGMII */
206 regulator-min-microvolt = <400000>;
207 regulator-max-microvolt = <1975000>;
208 regulator-always-on;
209 };
210
211 reg_ddr_1v5b: sw3b { /* NVCC_DRAM, NVCC_RGMII */
212 regulator-min-microvolt = <400000>;
213 regulator-max-microvolt = <1975000>;
214 regulator-always-on;
215 };
216
217 reg_ddr_vtt: sw4 { /* MIPI conn */
218 regulator-min-microvolt = <400000>;
219 regulator-max-microvolt = <1975000>;
220 regulator-always-on;
221 };
222
223 reg_5v_600mA: swbst { /* not used */
224 regulator-min-microvolt = <5000000>;
225 regulator-max-microvolt = <5150000>;
226 };
227
228 reg_snvs_3v: vsnvs { /* VDD_SNVS_IN */
229 regulator-min-microvolt = <1500000>;
230 regulator-max-microvolt = <3000000>;
231 regulator-always-on;
232 };
233
234 vref_reg: vrefddr { /* VREF_DDR */
235 regulator-boot-on;
236 regulator-always-on;
237 };
238
239 reg_vgen1_1v5: vgen1 { /* not used */
240 regulator-min-microvolt = <800000>;
241 regulator-max-microvolt = <1550000>;
242 };
243
244 reg_vgen2_1v2_eth: vgen2 { /* pcie ? */
245 regulator-min-microvolt = <800000>;
246 regulator-max-microvolt = <1550000>;
247 regulator-always-on;
248 };
249
250 reg_vgen3_2v8: vgen3 { /* not used */
251 regulator-min-microvolt = <1800000>;
252 regulator-max-microvolt = <3300000>;
253 };
254 reg_vgen4_1v8: vgen4 { /* NVCC_SD3 */
255 regulator-min-microvolt = <1800000>;
256 regulator-max-microvolt = <3300000>;
257 regulator-always-on;
258 };
259
260 reg_vgen5_2v5_sgtl: vgen5 { /* Pwr LED & 5V0_delayed enable */
261 regulator-min-microvolt = <1800000>;
262 regulator-max-microvolt = <3300000>;
263 regulator-always-on;
264 };
265
266 reg_vgen6_3v3: vgen6 { /* #V#_DELAYED enable, MIPI */
267 regulator-min-microvolt = <1800000>;
268 regulator-max-microvolt = <3300000>;
269 regulator-always-on;
270 };
271 };
272 };
273};
274
275&i2c2 {
276 clock-frequency = <100000>;
277 pinctrl-names = "default";
278 pinctrl-0 = <&pinctrl_i2c2>;
279 status = "okay";
280};
281
282&i2c4 {
283 clock-frequency = <100000>;
284 pinctrl-names = "default";
285 pinctrl-0 = <&pinctrl_i2c4>;
286 clocks = <&clks 116>;
287 status = "okay";
288};
289
290&pwm1 {
291 pinctrl-names = "default";
292 pinctrl-0 = <&pinctrl_pwm1>;
293 status = "okay";
294};
295
296&pwm2 {
297 pinctrl-names = "default";
298 pinctrl-0 = <&pinctrl_pwm2>;
299 status = "okay";
300};
301
302&pwm3 {
303 pinctrl-names = "default";
304 pinctrl-0 = <&pinctrl_pwm3>;
305 status = "okay";
306};
307
308&pwm4 {
309 pinctrl-names = "default";
310 pinctrl-0 = <&pinctrl_pwm4>;
311 status = "okay";
312};
313
314&ssi1 {
315 status = "okay";
316};
317
318&uart1 {
319 pinctrl-names = "default";
320 pinctrl-0 = <&pinctrl_uart1>;
321 status = "okay";
322};
323
324&uart2 {
325 pinctrl-names = "default";
326 pinctrl-0 = <&pinctrl_uart2>;
327 status = "okay";
328};
329
330&uart3 {
331 pinctrl-names = "default";
332 pinctrl-0 = <&pinctrl_uart3>;
333 status = "okay";
334};
335
336&uart4 {
337 pinctrl-names = "default";
338 pinctrl-0 = <&pinctrl_uart4>;
339 status = "okay";
340};
341
342&uart5 {
343 pinctrl-names = "default";
344 pinctrl-0 = <&pinctrl_uart5>;
345 status = "okay";
346};
347
348&usbh1 {
349 dr_mode = "host";
350 disable-over-current;
351 status = "okay";
352};
353
354&usbotg {
355 vbus-supply = <&reg_usb_otg_vbus>;
356 pinctrl-names = "default";
357 pinctrl-0 = <&pinctrl_usbotg>;
358 disable-over-current;
359 dr_mode = "otg";
360 status = "okay";
361};
362
363&usdhc2 {
364 pinctrl-names = "default";
365 pinctrl-0 = <&pinctrl_usdhc2>;
366 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
367 wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
368 vmmc-supply = <&reg_3p3v>;
369 status = "okay";
370};
371
372&usdhc3 {
373 pinctrl-names = "default";
374 pinctrl-0 = <&pinctrl_usdhc3>;
375 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
376 wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
377 vmmc-supply = <&reg_3p3v>;
378 status = "okay";
379};
380
381&usdhc4 {
382 pinctrl-names = "default";
383 pinctrl-0 = <&pinctrl_usdhc4>;
384 vmmc-supply = <&reg_3p3v>;
385 non-removable;
386 status = "okay";
387};
388
389&iomuxc {
390 pinctrl-names = "default";
391
392 imx6-riotboard {
393 pinctrl_audmux: audmuxgrp {
394 fsl,pins = <
395 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
396 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
397 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
398 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
399 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */
400 >;
401 };
402
403 pinctrl_ecspi1: ecspi1grp {
404 fsl,pins = <
405 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
406 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
407 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
408 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x000b1 /* CS0 */
409 >;
410 };
411
412 pinctrl_ecspi2: ecspi2grp {
413 fsl,pins = <
414 MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x000b1 /* CS1 */
415 MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1
416 MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1
417 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 /* CS0 */
418 MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1
419 >;
420 };
421
422 pinctrl_ecspi3: ecspi3grp {
423 fsl,pins = <
424 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
425 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
426 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
427 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 /* CS0 */
428 MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x000b1 /* CS1 */
429 >;
430 };
431
432 pinctrl_enet: enetgrp {
433 fsl,pins = <
434 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
435 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
436 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
437 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
438 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
439 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
440 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
441 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
442 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
443 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 /* AR8035 pin strapping: IO voltage: pull up */
444 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 /* AR8035 pin strapping: PHYADDR#0: pull down */
445 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 /* AR8035 pin strapping: PHYADDR#1: pull down */
446 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 /* AR8035 pin strapping: MODE#1: pull up */
447 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */
448 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */
449 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */
450 MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */
451 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 /* AR8035 interrupt */
452 MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
453 >;
454 };
455
456 pinctrl_i2c1: i2c1grp {
457 fsl,pins = <
458 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
459 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
460 >;
461 };
462
463 pinctrl_i2c2: i2c2grp {
464 fsl,pins = <
465 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
466 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
467 >;
468 };
469
470 pinctrl_i2c3: i2c3grp {
471 fsl,pins = <
472 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
473 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
474 >;
475 };
476
477 pinctrl_i2c4: i2c4grp {
478 fsl,pins = <
479 MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
480 MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
481 >;
482 };
483
484 pinctrl_led: ledgrp {
485 fsl,pins = <
486 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* user led0 */
487 MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b1 /* user led1 */
488 >;
489 };
490
491 pinctrl_pwm1: pwm1grp {
492 fsl,pins = <
493 MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
494 >;
495 };
496
497 pinctrl_pwm2: pwm2grp {
498 fsl,pins = <
499 MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1
500 >;
501 };
502
503 pinctrl_pwm3: pwm3grp {
504 fsl,pins = <
505 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
506 >;
507 };
508
509 pinctrl_pwm4: pwm4grp {
510 fsl,pins = <
511 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
512 >;
513 };
514
515 pinctrl_uart1: uart1grp {
516 fsl,pins = <
517 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
518 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
519 >;
520 };
521
522 pinctrl_uart2: uart2grp {
523 fsl,pins = <
524 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
525 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
526 >;
527 };
528
529 pinctrl_uart3: uart3grp {
530 fsl,pins = <
531 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
532 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
533 >;
534 };
535
536 pinctrl_uart4: uart4grp {
537 fsl,pins = <
538 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
539 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
540 >;
541 };
542
543 pinctrl_uart5: uart5grp {
544 fsl,pins = <
545 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
546 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
547 >;
548 };
549
550 pinctrl_usbotg: usbotggrp {
551 fsl,pins = <
552 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
553 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
554 MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
555 >;
556 };
557
558 pinctrl_usdhc2: usdhc2grp {
559 fsl,pins = <
560 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
561 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
562 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
563 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
564 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
565 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
566 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2 CD */
567 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1f0b0 /* SD2 WP */
568 >;
569 };
570
571 pinctrl_usdhc3: usdhc3grp {
572 fsl,pins = <
573 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
574 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
575 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
576 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
577 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
578 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
579 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* SD3 CD */
580 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* SD3 WP */
581 >;
582 };
583
584 pinctrl_usdhc4: usdhc4grp {
585 fsl,pins = <
586 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
587 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
588 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
589 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
590 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
591 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
592 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x17059 /* SD4 RST (eMMC) */
593 >;
594 };
595 };
596};