blob: 86fecd15a685f11d5c95568b11ac2aa9dcc02f90 [file] [log] [blame]
Michael Schwingen10c97872011-05-23 00:00:09 +02001/*
2 * (C) Copyright 2009
3 * Michael Schwingen, michael@schwingen.org
4 *
5 * Configuration settings for the
6 * dLAN200 AV Wireless G ("dvlhost") board.
7 *
8 * See file CREDITS for list of people who contributed to this
9 * project.
10 *
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * MA 02111-1307 USA
25 */
26
27#ifndef __CONFIG_H
28#define __CONFIG_H
29
30#define CONFIG_IXP425 1
31#define CONFIG_DVLHOST 1
32
33#define CONFIG_DISPLAY_CPUINFO 1
34#define CONFIG_DISPLAY_BOARDINFO 1
35
36#define CONFIG_IXP_SERIAL
37#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2
38#define CONFIG_BAUDRATE 115200
39#define CONFIG_BOOTDELAY 3
40#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
41#define CONFIG_BOARD_EARLY_INIT_F 1
42#define CONFIG_SYS_LDSCRIPT "board/dvlhost/u-boot.lds"
43
44/***************************************************************
45 * U-boot generic defines start here.
46 ***************************************************************/
47/* Size of malloc() pool */
48#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
49
50/* allow to overwrite serial and ethaddr */
51#define CONFIG_ENV_OVERWRITE
52
53/* Command line configuration. */
54#include <config_cmd_default.h>
55
56#define CONFIG_CMD_ELF
57#define CONFIG_PCI
58#ifdef CONFIG_PCI
59#define CONFIG_CMD_PCI
60#define CONFIG_PCI_PNP
61#define CONFIG_IXP_PCI
62#define CONFIG_PCI_SCAN_SHOW
63#define CONFIG_CMD_PCI_ENUM
64#endif
65
66#define CONFIG_BOOTCOMMAND "run boot_flash"
67/* enable passing of ATAGs */
68#define CONFIG_CMDLINE_TAG 1
69#define CONFIG_SETUP_MEMORY_TAGS 1
70#define CONFIG_INITRD_TAG 1
71
72#if defined(CONFIG_CMD_KGDB)
73# define CONFIG_KGDB_BAUDRATE 230400
74/* which serial port to use */
75# define CONFIG_KGDB_SER_INDEX 1
76#endif
77
78/* Miscellaneous configurable options */
79#define CONFIG_SYS_LONGHELP
80#define CONFIG_SYS_PROMPT "=> "
81/* Console I/O Buffer Size */
82#define CONFIG_SYS_CBSIZE 256
83/* Print Buffer Size */
84#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
85/* max number of command args */
86#define CONFIG_SYS_MAXARGS 16
87/* Boot Argument Buffer Size */
88#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
89
90#define CONFIG_SYS_MEMTEST_START 0x00000000
91#define CONFIG_SYS_MEMTEST_END 0x01D80000
92
93/* timer clock - 2* OSC_IN system clock */
94#define CONFIG_IXP425_TIMER_CLK 66666666
95#define CONFIG_SYS_HZ 1000
96
97/* default load address */
98#define CONFIG_SYS_LOAD_ADDR 0x00010000
99
100/* valid baudrates */
101#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
102 115200, 230400 }
103#define CONFIG_SERIAL_RTS_ACTIVE 1
104
105/*
106 * Stack sizes
107 *
108 * The stack sizes are set up in start.S using the settings below
109 */
110#define CONFIG_STACKSIZE (128*1024) /* regular stack */
111
112/* Expansion bus settings */
113#define CONFIG_SYS_EXP_CS0 0xbd113442
114
115/* SDRAM settings */
116#define CONFIG_NR_DRAM_BANKS 1
117#define PHYS_SDRAM_1 0x00000000
118#define CONFIG_SYS_SDRAM_BASE 0x00000000
119
120/* 32MB SDRAM: 2* 8Mx16, CL3 */
121#define CONFIG_SYS_SDR_CONFIG 0x18
122#define PHYS_SDRAM_1_SIZE 0x02000000
123#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x800
124#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
125#define CONFIG_SYS_DRAM_SIZE PHYS_SDRAM_1_SIZE
126
127/* FLASH organization: one Spansion S29AL032D-04 Flash */
128#define CONFIG_SYS_TEXT_BASE 0x50000000
129#define CONFIG_SYS_MAX_FLASH_BANKS 1
130/* max number of sectors on one chip */
131#define CONFIG_SYS_MAX_FLASH_SECT 140
132#define PHYS_FLASH_1 0x50000000
133#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
134
135#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
136#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
137#define CONFIG_SYS_MONITOR_LEN (256 << 10)
138#define CONFIG_BOARD_SIZE_LIMIT 262144
139
140/* Use common CFI driver */
141#define CONFIG_SYS_FLASH_CFI
142#define CONFIG_FLASH_CFI_DRIVER
143/* no byte writes on IXP4xx */
144#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
145
146/* print 'E' for empty sector on flinfo */
147#define CONFIG_SYS_FLASH_EMPTY_INFO
148
149/* Ethernet */
150
151/* include IXP4xx NPE support */
152#define CONFIG_IXP4XX_NPE 1
153
Michael Schwingen10c97872011-05-23 00:00:09 +0200154/* NPE0 PHY: MII dLAN200 AVmodule, 100BaseT-FDX fixed */
155#define CONFIG_PHY_ADDR 0x18
156/* NPE1 PHY: MII IP175 switch, port 5 is host port */
157#define CONFIG_PHY1_ADDR 0x05
158/* MII PHY management */
159#define CONFIG_MII 1
160/* fixed-speed powerline modem without standard PHY registers on MII */
161#define CONFIG_MII_NPE0_FIXEDLINK 1
162#define CONFIG_MII_NPE0_SPEED 100
163#define CONFIG_MII_NPE0_FULLDUPLEX 1
164/* fixed-speed switch without standard PHY registers on MII */
165#define CONFIG_MII_NPE1_FIXEDLINK 1
166#define CONFIG_MII_NPE1_SPEED 100
167#define CONFIG_MII_NPE1_FULLDUPLEX 1
168
169/* Number of ethernet rx buffers & descriptors */
170#define CONFIG_SYS_RX_ETH_BUFFER 16
171#define CONFIG_RESET_PHY_R 1
172/* ethernet switch connected to MII port */
173#define CONFIG_MII_ETHSWITCH 1
174#define CONFIG_HAS_ETH1 1
175
176#define CONFIG_CMD_DHCP
177#define CONFIG_CMD_NET
178#define CONFIG_CMD_MII
179#define CONFIG_CMD_PING
180#undef CONFIG_CMD_NFS
181
182/* BOOTP options */
183#define CONFIG_BOOTP_BOOTFILESIZE
184#define CONFIG_BOOTP_BOOTPATH
185#define CONFIG_BOOTP_GATEWAY
186#define CONFIG_BOOTP_HOSTNAME
187
188/* Cache Configuration */
189#define CONFIG_SYS_CACHELINE_SIZE 32
190
191/*
192 * environment organization:
193 * one flash sector, embedded in uboot area (bottom bootblock flash)
194 */
195#define CONFIG_ENV_IS_IN_FLASH 1
196#define CONFIG_ENV_SIZE 0x2000
197#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000)
198#define CONFIG_SYS_USE_PPCENV 1
199
200#define CONFIG_EXTRA_ENV_SETTINGS \
201 "npe_ucode=50040000\0" \
202 "ethprime=NPE1\0" \
203 "ethrotate=no\0" \
204 "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root),\0" \
205 "kerneladdr=50050000\0" \
206 "kernelfile=dvlhost/uImage\0" \
207 "rootfile=dvlhost/rootfs\0" \
208 "rootaddr=50170000\0" \
209 "loadaddr=10000\0" \
210 "updateboot_ser=mw.b 10000 ff 40000;" \
211 " loady ${loadaddr};" \
212 " run eraseboot writeboot\0" \
213 "updateboot_net=mw.b 10000 ff 40000;" \
214 " tftp ${loadaddr} dvlhost/u-boot.bin;" \
215 " run eraseboot writeboot\0" \
216 "eraseboot=protect off 50000000 50003fff;" \
217 " protect off 50006000 5003ffff;" \
218 " erase 50000000 50003fff;" \
219 " erase 50006000 5003ffff\0" \
220 "writeboot=cp.b 10000 50000000 4000;" \
221 " cp.b 16000 50006000 3a000\0" \
222 "updateucode=loady;" \
223 " era ${npe_ucode} +${filesize};" \
224 " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
225 "updateroot=tftp ${loadaddr} ${rootfile};" \
226 " era ${rootaddr} +${filesize};" \
227 " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
228 "updatekern=tftp ${loadaddr} ${kernelfile};" \
229 " era ${kerneladdr} +${filesize};" \
230 " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \
231 "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
232 " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
233 "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
234 " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
235 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
236 "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
237 "boot_flash=run flashargs addtty addeth;" \
238 " bootm ${kerneladdr}\0" \
239 "boot_net=run netargs addtty addeth;" \
240 " tftpboot ${loadaddr} ${kernelfile};" \
241 " bootm\0"
242
243/* additions for new relocation code, must be added to all boards */
244#define CONFIG_SYS_INIT_SP_ADDR \
245 (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
246
247#endif /* __CONFIG_H */