blob: e70c51d43d86fef80d86781c6363e14ad92bf5f9 [file] [log] [blame]
David Feng0ae76532013-12-14 11:47:35 +08001/*
2 * (C) Copyright 2013
3 * David Feng <fenghua@phytium.com.cn>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#include <asm-offsets.h>
9#include <config.h>
10#include <version.h>
11#include <linux/linkage.h>
12#include <asm/macro.h>
13#include <asm/armv8/mmu.h>
14
15/*************************************************************************
16 *
17 * Startup Code (reset vector)
18 *
19 *************************************************************************/
20
21.globl _start
22_start:
23 b reset
24
25 .align 3
26
27.globl _TEXT_BASE
28_TEXT_BASE:
29 .quad CONFIG_SYS_TEXT_BASE
30
31/*
32 * These are defined in the linker script.
33 */
34.globl _end_ofs
35_end_ofs:
36 .quad _end - _start
37
38.globl _bss_start_ofs
39_bss_start_ofs:
40 .quad __bss_start - _start
41
42.globl _bss_end_ofs
43_bss_end_ofs:
44 .quad __bss_end - _start
45
46reset:
47 /*
48 * Could be EL3/EL2/EL1, Initial State:
49 * Little Endian, MMU Disabled, i/dCache Disabled
50 */
51 adr x0, vectors
52 switch_el x1, 3f, 2f, 1f
533: msr vbar_el3, x0
54 msr cptr_el3, xzr /* Enable FP/SIMD */
55 ldr x0, =COUNTER_FREQUENCY
56 msr cntfrq_el0, x0 /* Initialize CNTFRQ */
57 b 0f
582: msr vbar_el2, x0
59 mov x0, #0x33ff
60 msr cptr_el2, x0 /* Enable FP/SIMD */
61 b 0f
621: msr vbar_el1, x0
63 mov x0, #3 << 20
64 msr cpacr_el1, x0 /* Enable FP/SIMD */
650:
66
67 /* Cache/BPB/TLB Invalidate */
68 bl __asm_flush_dcache_all /* dCache clean&invalidate */
69 bl __asm_invalidate_icache_all /* iCache invalidate */
70 bl __asm_invalidate_tlb_all /* invalidate TLBs */
71
72 /* Processor specific initialization */
73 bl lowlevel_init
74
75 branch_if_master x0, x1, master_cpu
76
77 /*
78 * Slave CPUs
79 */
80slave_cpu:
81 wfe
82 ldr x1, =CPU_RELEASE_ADDR
83 ldr x0, [x1]
84 cbz x0, slave_cpu
85 br x0 /* branch to the given address */
86
87 /*
88 * Master CPU
89 */
90master_cpu:
91 bl _main
92
93/*-----------------------------------------------------------------------*/
94
95WEAK(lowlevel_init)
96 /* Initialize GIC Secure Bank Status */
97 mov x29, lr /* Save LR */
98 bl gic_init
99
100 branch_if_master x0, x1, 1f
101
102 /*
103 * Slave should wait for master clearing spin table.
104 * This sync prevent salves observing incorrect
105 * value of spin table and jumping to wrong place.
106 */
107 bl wait_for_wakeup
108
109 /*
110 * All processors will enter EL2 and optionally EL1.
111 */
112 bl armv8_switch_to_el2
113#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
114 bl armv8_switch_to_el1
115#endif
116
1171:
118 mov lr, x29 /* Restore LR */
119 ret
120ENDPROC(lowlevel_init)
121
122/*-----------------------------------------------------------------------*/
123
124ENTRY(c_runtime_cpu_setup)
David Feng0ae76532013-12-14 11:47:35 +0800125 /* Relocate vBAR */
126 adr x0, vectors
127 switch_el x1, 3f, 2f, 1f
1283: msr vbar_el3, x0
129 b 0f
1302: msr vbar_el2, x0
131 b 0f
1321: msr vbar_el1, x0
1330:
134
135 ret
136ENDPROC(c_runtime_cpu_setup)