blob: da6f3fc8ccf1eb03068484520b212202cdc03117 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Nishanth Menonddf56bc2015-09-17 15:42:39 -05002/*
3 * (C) Copyright 2015
4 * Texas Instruments Incorporated - http://www.ti.com/
Nishanth Menonddf56bc2015-09-17 15:42:39 -05005 */
6#include <common.h>
7#include <command.h>
8#include <dm.h>
9#include <errno.h>
10#include <malloc.h>
11#include <remoteproc.h>
12
13/**
14 * print_remoteproc_list() - print all the remote processor devices
15 *
16 * Return: 0 if no error, else returns appropriate error value.
17 */
18static int print_remoteproc_list(void)
19{
20 struct udevice *dev;
21 struct uclass *uc;
22 int ret;
23 char *type;
24
25 ret = uclass_get(UCLASS_REMOTEPROC, &uc);
26 if (ret) {
27 printf("Cannot find Remote processor class\n");
28 return ret;
29 }
30
31 uclass_foreach_dev(dev, uc) {
32 struct dm_rproc_uclass_pdata *uc_pdata;
33 const struct dm_rproc_ops *ops = rproc_get_ops(dev);
34
35 uc_pdata = dev_get_uclass_platdata(dev);
36
Lokesh Vutla96f41f92019-06-07 19:25:56 +053037 /* Do not print if rproc is not probed */
38 if (!(dev->flags & DM_FLAG_ACTIVATED))
39 continue;
40
Nishanth Menonddf56bc2015-09-17 15:42:39 -050041 switch (uc_pdata->mem_type) {
42 case RPROC_INTERNAL_MEMORY_MAPPED:
43 type = "internal memory mapped";
44 break;
45 default:
46 type = "unknown";
47 break;
48 }
49 printf("%d - Name:'%s' type:'%s' supports: %s%s%s%s%s%s\n",
50 dev->seq,
51 uc_pdata->name,
52 type,
53 ops->load ? "load " : "",
54 ops->start ? "start " : "",
55 ops->stop ? "stop " : "",
56 ops->reset ? "reset " : "",
57 ops->is_running ? "is_running " : "",
58 ops->ping ? "ping " : "");
59 }
60 return 0;
61}
62
63/**
64 * do_rproc_init() - do basic initialization
65 * @cmdtp: unused
66 * @flag: unused
67 * @argc: unused
68 * @argv: unused
69 *
70 * Return: 0 if no error, else returns appropriate error value.
71 */
72static int do_rproc_init(cmd_tbl_t *cmdtp, int flag, int argc,
73 char *const argv[])
74{
Lokesh Vutla75a11cc2019-06-07 19:25:55 +053075 int id;
76
Nishanth Menonddf56bc2015-09-17 15:42:39 -050077 if (rproc_is_initialized()) {
78 printf("\tRemote Processors are already initialized\n");
Lokesh Vutla75a11cc2019-06-07 19:25:55 +053079 return CMD_RET_FAILURE;
80 }
81
82 if (argc == 1) {
Nishanth Menonddf56bc2015-09-17 15:42:39 -050083 if (!rproc_init())
84 return 0;
Lokesh Vutla75a11cc2019-06-07 19:25:55 +053085 printf("Few Remote Processors failed to be initialized\n");
86 } else if (argc == 2) {
87 id = (int)simple_strtoul(argv[1], NULL, 10);
88 if (!rproc_dev_init(id))
89 return 0;
90 printf("Remote Processor %d failed to be initialized\n", id);
Nishanth Menonddf56bc2015-09-17 15:42:39 -050091 }
92
93 return CMD_RET_FAILURE;
94}
95
96/**
97 * do_remoteproc_list() - print list of remote proc devices.
98 * @cmdtp: unused
99 * @flag: unused
100 * @argc: unused
101 * @argv: unused
102 *
103 * Return: 0 if no error, else returns appropriate error value.
104 */
105static int do_remoteproc_list(cmd_tbl_t *cmdtp, int flag, int argc,
106 char *const argv[])
107{
Nishanth Menonddf56bc2015-09-17 15:42:39 -0500108 if (print_remoteproc_list())
109 return CMD_RET_FAILURE;
110
111 return 0;
112}
113
114/**
115 * do_remoteproc_load() - Load a remote processor with binary image
116 * @cmdtp: unused
117 * @flag: unused
118 * @argc: argument count for the load function
119 * @argv: arguments for the load function
120 *
121 * Return: 0 if no error, else returns appropriate error value.
122 */
123static int do_remoteproc_load(cmd_tbl_t *cmdtp, int flag, int argc,
124 char *const argv[])
125{
126 ulong addr, size;
127 int id, ret;
128
129 if (argc != 4)
130 return CMD_RET_USAGE;
131
Keerthy1a25d902018-10-24 11:47:14 +0530132 id = (int)simple_strtoul(argv[1], NULL, 10);
Nishanth Menonddf56bc2015-09-17 15:42:39 -0500133 addr = simple_strtoul(argv[2], NULL, 16);
134
135 size = simple_strtoul(argv[3], NULL, 16);
136
137 if (!size) {
138 printf("\t Expect some size??\n");
139 return CMD_RET_USAGE;
140 }
141
Nishanth Menonddf56bc2015-09-17 15:42:39 -0500142 ret = rproc_load(id, addr, size);
143 printf("Load Remote Processor %d with data@addr=0x%08lx %lu bytes:%s\n",
144 id, addr, size, ret ? " Failed!" : " Success!");
145
146 return ret ? CMD_RET_FAILURE : 0;
147}
148
149/**
150 * do_remoteproc_wrapper() - wrapper for various rproc commands
151 * @cmdtp: unused
152 * @flag: unused
153 * @argc: argument count for the rproc command
154 * @argv: arguments for the rproc command
155 *
156 * Most of the commands just take id as a parameter andinvoke various
157 * helper routines in remote processor core. by using a set of
158 * common checks, we can reduce the amount of code used for this.
159 *
160 * Return: 0 if no error, else returns appropriate error value.
161 */
162static int do_remoteproc_wrapper(cmd_tbl_t *cmdtp, int flag, int argc,
163 char *const argv[])
164{
165 int id, ret = CMD_RET_USAGE;
166
167 if (argc != 2)
168 return CMD_RET_USAGE;
169
Keerthy1a25d902018-10-24 11:47:14 +0530170 id = (int)simple_strtoul(argv[1], NULL, 10);
Nishanth Menonddf56bc2015-09-17 15:42:39 -0500171
Nishanth Menonddf56bc2015-09-17 15:42:39 -0500172 if (!strcmp(argv[0], "start")) {
173 ret = rproc_start(id);
174 } else if (!strcmp(argv[0], "stop")) {
175 ret = rproc_stop(id);
176 } else if (!strcmp(argv[0], "reset")) {
177 ret = rproc_reset(id);
178 } else if (!strcmp(argv[0], "is_running")) {
179 ret = rproc_is_running(id);
180 if (!ret) {
181 printf("Remote processor is Running\n");
182 } else if (ret == 1) {
183 printf("Remote processor is NOT Running\n");
184 ret = 0;
185 }
186 /* Else error.. */
187 } else if (!strcmp(argv[0], "ping")) {
188 ret = rproc_ping(id);
189 if (!ret) {
190 printf("Remote processor responds 'Pong'\n");
191 } else if (ret == 1) {
192 printf("No response from Remote processor\n");
193 ret = 0;
194 }
195 /* Else error.. */
196 }
197
198 if (ret < 0)
199 printf("Operation Failed with error (%d)\n", ret);
200
201 return ret ? CMD_RET_FAILURE : 0;
202}
203
204static cmd_tbl_t cmd_remoteproc_sub[] = {
Lokesh Vutla75a11cc2019-06-07 19:25:55 +0530205 U_BOOT_CMD_MKENT(init, 1, 1, do_rproc_init,
206 "Enumerate and initialize the remote processor(s)",
207 "id - ID of the remote processor\n"
208 "If id is not passed, initialize all the remote processors"),
Nishanth Menonddf56bc2015-09-17 15:42:39 -0500209 U_BOOT_CMD_MKENT(list, 0, 1, do_remoteproc_list,
210 "list remote processors", ""),
211 U_BOOT_CMD_MKENT(load, 5, 1, do_remoteproc_load,
212 "Load remote processor with provided image",
213 "<id> [addr] [size]\n"
214 "- id: ID of the remote processor(see 'list' cmd)\n"
215 "- addr: Address in memory of the image to loadup\n"
216 "- size: Size of the image to loadup\n"),
217 U_BOOT_CMD_MKENT(start, 1, 1, do_remoteproc_wrapper,
218 "Start remote processor",
219 "id - ID of the remote processor (see 'list' cmd)\n"),
220 U_BOOT_CMD_MKENT(stop, 1, 1, do_remoteproc_wrapper,
221 "Stop remote processor",
222 "id - ID of the remote processor (see 'list' cmd)\n"),
223 U_BOOT_CMD_MKENT(reset, 1, 1, do_remoteproc_wrapper,
224 "Reset remote processor",
225 "id - ID of the remote processor (see 'list' cmd)\n"),
226 U_BOOT_CMD_MKENT(is_running, 1, 1, do_remoteproc_wrapper,
227 "Check to see if remote processor is running\n",
228 "id - ID of the remote processor (see 'list' cmd)\n"),
229 U_BOOT_CMD_MKENT(ping, 1, 1, do_remoteproc_wrapper,
230 "Ping to communicate with remote processor\n",
231 "id - ID of the remote processor (see 'list' cmd)\n"),
232};
233
234/**
235 * do_remoteproc() - (replace: short desc)
236 * @cmdtp: unused
237 * @flag: unused
238 * @argc: argument count
239 * @argv: argument list
240 *
241 * parses up the command table to invoke the correct command.
242 *
243 * Return: 0 if no error, else returns appropriate error value.
244 */
245static int do_remoteproc(cmd_tbl_t *cmdtp, int flag, int argc,
246 char *const argv[])
247{
248 cmd_tbl_t *c = NULL;
249
250 /* Strip off leading 'rproc' command argument */
251 argc--;
252 argv++;
253
254 if (argc)
255 c = find_cmd_tbl(argv[0], cmd_remoteproc_sub,
256 ARRAY_SIZE(cmd_remoteproc_sub));
257 if (c)
258 return c->cmd(cmdtp, flag, argc, argv);
259
260 return CMD_RET_USAGE;
261}
262
263U_BOOT_CMD(rproc, 5, 1, do_remoteproc,
264 "Control operation of remote processors in an SoC",
265 " [init|list|load|start|stop|reset|is_running|ping]\n"
266 "\t\t Where:\n"
267 "\t\t[addr] is a memory address\n"
268 "\t\t<id> is a numerical identifier for the remote processor\n"
269 "\t\t provided by 'list' command.\n"
270 "\t\tNote: Remote processors must be initalized prior to usage\n"
271 "\t\tNote: Services are dependent on the driver capability\n"
272 "\t\t 'list' command shows the capability of each device\n"
273 "\n\tSubcommands:\n"
Lokesh Vutla75a11cc2019-06-07 19:25:55 +0530274 "\tinit <id> - Enumerate and initalize the remote processor.\n"
275 "\t if id is not passed, initialize all the remote prcessors\n"
Nishanth Menonddf56bc2015-09-17 15:42:39 -0500276 "\tlist - list available remote processors\n"
277 "\tload <id> [addr] [size]- Load the remote processor with binary\n"
278 "\t image stored at address [addr] in memory\n"
279 "\tstart <id> - Start the remote processor(must be loaded)\n"
280 "\tstop <id> - Stop the remote processor\n"
281 "\treset <id> - Reset the remote processor\n"
282 "\tis_running <id> - Reports if the remote processor is running\n"
283 "\tping <id> - Ping the remote processor for communication\n");