blob: 24904b0b7c3c39507ce146ab401edf2256f74174 [file] [log] [blame]
Macpaul Lin6cb144b2010-10-19 17:05:51 +08001/*
2 * Copyright (C) 2011 Andes Technology Corporation
3 * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
4 * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
5 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Macpaul Lin6cb144b2010-10-19 17:05:51 +08007 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
12#include <asm/arch/ag101.h>
13
14/*
15 * CPU and Board Configuration Options
16 */
17#define CONFIG_ADP_AG101P
18
19#define CONFIG_USE_INTERRUPT
20
21#define CONFIG_SKIP_LOWLEVEL_INIT
22
ken kuoe3c58b02013-06-08 11:14:12 +080023/*
24 * Definitions related to passing arguments to kernel.
25 */
26#define CONFIG_CMDLINE_TAG /* send commandline to Kernel */
27#define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */
28#define CONFIG_INITRD_TAG /* send initrd params */
29
Macpaul Lin6cb144b2010-10-19 17:05:51 +080030#ifndef CONFIG_SKIP_LOWLEVEL_INIT
31#define CONFIG_MEM_REMAP
32#endif
33
34#ifdef CONFIG_SKIP_LOWLEVEL_INIT
35#define CONFIG_SYS_TEXT_BASE 0x03200000
36#else
37#define CONFIG_SYS_TEXT_BASE 0x00000000
38#endif
39
40/*
41 * Timer
42 */
Macpaul Lin6cb144b2010-10-19 17:05:51 +080043#define CONFIG_SYS_CLK_FREQ 39062500
44#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
45
46/*
47 * Use Externel CLOCK or PCLK
48 */
49#undef CONFIG_FTRTC010_EXTCLK
50
51#ifndef CONFIG_FTRTC010_EXTCLK
52#define CONFIG_FTRTC010_PCLK
53#endif
54
55#ifdef CONFIG_FTRTC010_EXTCLK
56#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
57#else
58#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
59#endif
60
61#define TIMER_LOAD_VAL 0xffffffff
62
63/*
64 * Real Time Clock
65 */
66#define CONFIG_RTC_FTRTC010
67
68/*
69 * Real Time Clock Divider
70 * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
71 */
72#define OSC_5MHZ (5*1000000)
73#define OSC_CLK (4*OSC_5MHZ)
74#define RTC_DIV_COUNT (0.5) /* Why?? */
75
76/*
77 * Serial console configuration
78 */
79
80/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
81#define CONFIG_BAUDRATE 38400
82#define CONFIG_CONS_INDEX 1
83#define CONFIG_SYS_NS16550
84#define CONFIG_SYS_NS16550_SERIAL
85#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE
86#define CONFIG_SYS_NS16550_REG_SIZE -4
87#define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */
88
Macpaul Lin6cb144b2010-10-19 17:05:51 +080089/*
90 * Ethernet
91 */
92#define CONFIG_FTMAC100
93
94#define CONFIG_BOOTDELAY 3
95
96/*
97 * SD (MMC) controller
98 */
99#define CONFIG_MMC
100#define CONFIG_CMD_MMC
101#define CONFIG_GENERIC_MMC
102#define CONFIG_DOS_PARTITION
103#define CONFIG_FTSDC010
104#define CONFIG_FTSDC010_NUMBER 1
ken kuo61ccf082013-06-08 11:14:11 +0800105#define CONFIG_FTSDC010_SDIO
Macpaul Lin6cb144b2010-10-19 17:05:51 +0800106#define CONFIG_CMD_FAT
ken kuo61ccf082013-06-08 11:14:11 +0800107#define CONFIG_CMD_EXT2
Macpaul Lin6cb144b2010-10-19 17:05:51 +0800108
109/*
110 * Command line configuration.
111 */
112#include <config_cmd_default.h>
113
114#define CONFIG_CMD_CACHE
115#define CONFIG_CMD_DATE
116#define CONFIG_CMD_PING
117
118/*
119 * Miscellaneous configurable options
120 */
121#define CONFIG_SYS_LONGHELP /* undef to save memory */
122#define CONFIG_SYS_PROMPT "NDS32 # " /* Monitor Command Prompt */
123#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
124
125/* Print Buffer Size */
126#define CONFIG_SYS_PBSIZE \
127 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
128
129/* max number of command args */
130#define CONFIG_SYS_MAXARGS 16
131
132/* Boot Argument Buffer Size */
133#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
134
135/*
Macpaul Lin6cb144b2010-10-19 17:05:51 +0800136 * Size of malloc() pool
137 */
138/* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
139#define CONFIG_SYS_MALLOC_LEN (512 << 10)
140
141/*
Macpaul Lin6cb144b2010-10-19 17:05:51 +0800142 * AHB Controller configuration
143 */
144#define CONFIG_FTAHBC020S
145
146#ifdef CONFIG_FTAHBC020S
147#include <faraday/ftahbc020s.h>
148
149/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
150#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100
151
152/*
153 * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
154 * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
155 * in C language.
156 */
157#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
158 (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
159 FTAHBC020S_SLAVE_BSR_SIZE(0xb))
160#endif
161
162/*
163 * Watchdog
164 */
165#define CONFIG_FTWDT010_WATCHDOG
166
167/*
168 * PMU Power controller configuration
169 */
170#define CONFIG_PMU
171#define CONFIG_FTPMU010_POWER
172
173#ifdef CONFIG_FTPMU010_POWER
174#include <faraday/ftpmu010.h>
175#define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E
176#define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR | \
177 FTPMU010_SDRAMHTC_EBIDATA_DCSR | \
178 FTPMU010_SDRAMHTC_SDRAMCS_DCSR | \
179 FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \
180 FTPMU010_SDRAMHTC_CKE_DCSR | \
181 FTPMU010_SDRAMHTC_DQM_DCSR | \
182 FTPMU010_SDRAMHTC_SDCLK_DCSR)
183#endif
184
185/*
186 * SDRAM controller configuration
187 */
188#define CONFIG_FTSDMC021
189
190#ifdef CONFIG_FTSDMC021
191#include <faraday/ftsdmc021.h>
192
193#define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRAS(2) | \
194 FTSDMC021_TP1_TRP(1) | \
195 FTSDMC021_TP1_TRCD(1) | \
196 FTSDMC021_TP1_TRF(3) | \
197 FTSDMC021_TP1_TWR(1) | \
198 FTSDMC021_TP1_TCL(2))
199
200#define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) | \
201 FTSDMC021_TP2_INI_REFT(8) | \
202 FTSDMC021_TP2_REF_INTV(0x180))
203
204/*
205 * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
206 * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
207 * C language.
208 */
209#define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) | \
210 FTSDMC021_CR1_DSZ(3) | \
211 FTSDMC021_CR1_MBW(2) | \
212 FTSDMC021_CR1_BNKSIZE(6))
213
214#define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC | \
215 FTSDMC021_CR2_IREF | \
216 FTSDMC021_CR2_ISMR)
217
218#define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
219#define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \
220 CONFIG_SYS_FTSDMC021_BANK0_BASE)
221
ken kuo3c016702013-06-08 11:14:09 +0800222#define CONFIG_SYS_FTSDMC021_BANK1_BASE \
223 (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
224#define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \
225 CONFIG_SYS_FTSDMC021_BANK1_BASE)
Macpaul Lin6cb144b2010-10-19 17:05:51 +0800226#endif
227
228/*
229 * Physical Memory Map
230 */
231#if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
232#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
233#if defined(CONFIG_MEM_REMAP)
234#define PHYS_SDRAM_0_AT_INIT 0x10000000 /* SDRAM Bank #1 before remap*/
235#endif
236#else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
237#define PHYS_SDRAM_0 0x10000000 /* SDRAM Bank #1 */
238#endif
ken kuo3c016702013-06-08 11:14:09 +0800239#define PHYS_SDRAM_1 \
240 (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
Macpaul Lin6cb144b2010-10-19 17:05:51 +0800241
ken kuo3c016702013-06-08 11:14:09 +0800242#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */
Macpaul Lin6cb144b2010-10-19 17:05:51 +0800243#define PHYS_SDRAM_0_SIZE 0x04000000 /* 64 MB */
ken kuo3c016702013-06-08 11:14:09 +0800244#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
Macpaul Lin6cb144b2010-10-19 17:05:51 +0800245
246#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
247
248#ifdef CONFIG_MEM_REMAP
249#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
250 GENERATED_GBL_DATA_SIZE)
251#else
252#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
253 GENERATED_GBL_DATA_SIZE)
254#endif /* CONFIG_MEM_REMAP */
255
256/*
257 * Load address and memory test area should agree with
258 * arch/nds32/config.mk. Be careful not to overwrite U-boot itself.
259 */
260#define CONFIG_SYS_LOAD_ADDR 0x300000
261
262/* memtest works on 63 MB in DRAM */
263#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0
264#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000)
265
266/*
267 * Static memory controller configuration
268 */
269#define CONFIG_FTSMC020
270
271#ifdef CONFIG_FTSMC020
272#include <faraday/ftsmc020.h>
273
274#define CONFIG_SYS_FTSMC020_CONFIGS { \
275 { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \
276 { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
277}
278
279#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */
280#define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \
281 FTSMC020_BANK_SIZE_32M | \
282 FTSMC020_BANK_MBW_32)
283
284#define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \
285 FTSMC020_TPR_AST(1) | \
286 FTSMC020_TPR_CTW(1) | \
287 FTSMC020_TPR_ATI(1) | \
288 FTSMC020_TPR_AT2(1) | \
289 FTSMC020_TPR_WTC(1) | \
290 FTSMC020_TPR_AHT(1) | \
291 FTSMC020_TPR_TRNA(1))
292#endif
293
294/*
295 * FLASH on ADP_AG101P is connected to BANK0
296 * Just disalbe the other BANK to avoid detection error.
297 */
298#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \
299 FTSMC020_BANK_BASE(PHYS_FLASH_1) | \
300 FTSMC020_BANK_SIZE_32M | \
301 FTSMC020_BANK_MBW_32)
302
303#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \
304 FTSMC020_TPR_CTW(3) | \
305 FTSMC020_TPR_ATI(0xf) | \
306 FTSMC020_TPR_AT2(3) | \
307 FTSMC020_TPR_WTC(3) | \
308 FTSMC020_TPR_AHT(3) | \
309 FTSMC020_TPR_TRNA(0xf))
310
311#define FTSMC020_BANK1_CONFIG (0x00)
312#define FTSMC020_BANK1_TIMING (0x00)
313#endif /* CONFIG_FTSMC020 */
314
315/*
316 * FLASH and environment organization
317 */
318/* use CFI framework */
319#define CONFIG_SYS_FLASH_CFI
320#define CONFIG_FLASH_CFI_DRIVER
321
322#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
323#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
324
325/* support JEDEC */
326
327/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
328#ifdef CONFIG_SKIP_LOWLEVEL_INIT
329#define PHYS_FLASH_1 0x80400000 /* BANK 1 */
330#else /* !CONFIG_SKIP_LOWLEVEL_INIT */
331#ifdef CONFIG_MEM_REMAP
332#define PHYS_FLASH_1 0x80000000 /* BANK 0 */
333#else
334#define PHYS_FLASH_1 0x00000000 /* BANK 0 */
335#endif /* CONFIG_MEM_REMAP */
336#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
337
338#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
339#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
340#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
341
342#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
343#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
344
345/* max number of memory banks */
346/*
347 * There are 4 banks supported for this Controller,
348 * but we have only 1 bank connected to flash on board
349 */
350#define CONFIG_SYS_MAX_FLASH_BANKS 1
351
352/* max number of sectors on one chip */
353#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2*2)
354#define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE
355#define CONFIG_SYS_MAX_FLASH_SECT 128
356
357/* environments */
358#define CONFIG_ENV_IS_IN_FLASH
359#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x140000)
360#define CONFIG_ENV_SIZE 8192
361#define CONFIG_ENV_OVERWRITE
362
363#endif /* __CONFIG_H */