blob: 4f4b3f85e29411c850da1ac1057f447e42d68747 [file] [log] [blame]
Yuiko Oshinod2c31972017-08-11 12:44:58 -04001/*
2 * Copyright (c) 2017 Microchip Technology Inc. All rights reserved.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#include <console.h>
8#include <watchdog.h>
9
10/* USB Vendor Requests */
11#define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0
12#define USB_VENDOR_REQUEST_READ_REGISTER 0xA1
13#define USB_VENDOR_REQUEST_GET_STATS 0xA2
14
15/* Tx Command A */
16#define TX_CMD_A_FCS BIT(22)
17#define TX_CMD_A_LEN_MASK 0x000FFFFF
18
19/* Rx Command A */
20#define RX_CMD_A_RXE BIT(18)
21#define RX_CMD_A_LEN_MASK 0x00003FFF
22
23/* SCSRs */
24#define ID_REV 0x00
25#define ID_REV_CHIP_ID_MASK 0xFFFF0000
26#define ID_REV_CHIP_ID_7500 0x7500
27#define ID_REV_CHIP_ID_7800 0x7800
28#define ID_REV_CHIP_ID_7850 0x7850
29
30#define INT_STS 0x0C
31
32#define HW_CFG 0x010
33#define HW_CFG_LRST BIT(1)
34
35#define PMT_CTL 0x014
36#define PMT_CTL_PHY_PWRUP BIT(10)
37#define PMT_CTL_READY BIT(7)
38#define PMT_CTL_PHY_RST BIT(4)
39
40#define E2P_CMD 0x040
41#define E2P_CMD_EPC_BUSY BIT(31)
42#define E2P_CMD_EPC_CMD_READ 0x00000000
43#define E2P_CMD_EPC_TIMEOUT BIT(10)
44#define E2P_CMD_EPC_ADDR_MASK 0x000001FF
45
46#define E2P_DATA 0x044
47
48#define RFE_CTL_BCAST_EN BIT(10)
49#define RFE_CTL_DA_PERFECT BIT(1)
50
51#define FCT_RX_CTL_EN BIT(31)
52
53#define FCT_TX_CTL_EN BIT(31)
54
55#define MAC_CR 0x100
56#define MAC_CR_ADP BIT(13)
57#define MAC_CR_AUTO_DUPLEX BIT(12)
58#define MAC_CR_AUTO_SPEED BIT(11)
59
60#define MAC_RX 0x104
61#define MAC_RX_FCS_STRIP BIT(4)
62#define MAC_RX_RXEN BIT(0)
63
64#define MAC_TX 0x108
65#define MAC_TX_TXEN BIT(0)
66
67#define FLOW 0x10C
68#define FLOW_CR_TX_FCEN BIT(30)
69#define FLOW_CR_RX_FCEN BIT(29)
70
71#define RX_ADDRH 0x118
72#define RX_ADDRL 0x11C
73
74#define MII_ACC 0x120
75#define MII_ACC_MII_READ 0x00000000
76#define MII_ACC_MII_WRITE 0x00000002
77#define MII_ACC_MII_BUSY BIT(0)
78
79#define MII_DATA 0x124
80
81#define SS_USB_PKT_SIZE 1024
82#define HS_USB_PKT_SIZE 512
83#define FS_USB_PKT_SIZE 64
84
85#define MAX_RX_FIFO_SIZE (12 * 1024)
86#define MAX_TX_FIFO_SIZE (12 * 1024)
87#define DEFAULT_BULK_IN_DELAY 0x0800
88
89#define EEPROM_INDICATOR 0xA5
90#define EEPROM_MAC_OFFSET 0x01
91
92/* Some extra defines */
93#define LAN7X_INTERNAL_PHY_ID 1
94
95#define LAN7X_MAC_RX_MAX_SIZE(mtu) \
96 ((mtu) << 16) /* Max frame size */
97#define LAN7X_MAC_RX_MAX_SIZE_DEFAULT \
98 LAN7X_MAC_RX_MAX_SIZE(ETH_FRAME_LEN + 4 /* VLAN */ + 4 /* CRC */)
99
100/* Timeouts */
101#define USB_CTRL_SET_TIMEOUT_MS 5000
102#define USB_CTRL_GET_TIMEOUT_MS 5000
103#define USB_BULK_SEND_TIMEOUT_MS 5000
104#define USB_BULK_RECV_TIMEOUT_MS 5000
105#define TIMEOUT_RESOLUTION_MS 50
106#define PHY_CONNECT_TIMEOUT_MS 5000
107
108#define RX_URB_SIZE 2048
109
110/* driver private */
111struct lan7x_private {
112 struct ueth_data ueth;
113 u32 chipid; /* Chip or device ID */
114 struct mii_dev *mdiobus;
115 struct phy_device *phydev;
116};
117
118/*
119 * Lan7x infrastructure commands
120 */
121
122int lan7x_write_reg(struct usb_device *udev, u32 index, u32 data);
123
124int lan7x_read_reg(struct usb_device *udev, u32 index, u32 *data);
125
126static inline int lan7x_wait_for_bit(struct usb_device *udev,
127 const char *prefix, const u32 reg,
128 const u32 mask, const bool set,
129 const unsigned int timeout_ms,
130 const bool breakable)
131{
132 u32 val;
133 unsigned long start = get_timer(0);
134
135 while (1) {
136 lan7x_read_reg(udev, reg, &val);
137
138 if (!set)
139 val = ~val;
140
141 if ((val & mask) == mask)
142 return 0;
143
144 if (get_timer(start) > timeout_ms)
145 break;
146
147 if (breakable && ctrlc()) {
148 puts("Abort\n");
149 return -EINTR;
150 }
151
152 udelay(1);
153 WATCHDOG_RESET();
154 }
155
156 debug("%s: Timeout (reg=0x%x mask=%08x wait_set=%i)\n", prefix, reg,
157 mask, set);
158
159 return -ETIMEDOUT;
160}
161
162int lan7x_mdio_read(struct usb_device *udev, int phy_id, int idx);
163
164void lan7x_mdio_write(struct usb_device *udev, int phy_id, int idx,
165 int regval);
166
167static inline int lan7x_mdio_wait_for_bit(struct usb_device *udev,
168 const char *prefix,
169 int phy_id, const u32 reg,
170 const u32 mask, const bool set,
171 const unsigned int timeout_ms,
172 const bool breakable)
173{
174 u32 val;
175 unsigned long start = get_timer(0);
176
177 while (1) {
178 val = lan7x_mdio_read(udev, phy_id, reg);
179
180 if (!set)
181 val = ~val;
182
183 if ((val & mask) == mask)
184 return 0;
185
186 if (get_timer(start) > timeout_ms)
187 break;
188
189 if (breakable && ctrlc()) {
190 puts("Abort\n");
191 return -EINTR;
192 }
193
194 udelay(1);
195 WATCHDOG_RESET();
196 }
197
198 debug("%s: Timeout (reg=0x%x mask=%08x wait_set=%i)\n", prefix, reg,
199 mask, set);
200
201 return -ETIMEDOUT;
202}
203
204int lan7x_phylib_register(struct udevice *udev);
205
206int lan7x_eth_phylib_connect(struct udevice *udev, struct ueth_data *dev);
207
208int lan7x_eth_phylib_config_start(struct udevice *udev);
209
210int lan7x_pmt_phy_reset(struct usb_device *udev,
211 struct ueth_data *dev);
212
213int lan7x_update_flowcontrol(struct usb_device *udev,
214 struct ueth_data *dev,
215 uint32_t *flow, uint32_t *fct_flow);
216
217int lan7x_read_eeprom_mac(unsigned char *enetaddr, struct usb_device *udev);
218
219int lan7x_basic_reset(struct usb_device *udev,
220 struct ueth_data *dev);
221
222void lan7x_eth_stop(struct udevice *dev);
223
224int lan7x_eth_send(struct udevice *dev, void *packet, int length);
225
226int lan7x_eth_recv(struct udevice *dev, int flags, uchar **packetp);
227
228int lan7x_free_pkt(struct udevice *dev, uchar *packet, int packet_len);
229
230int lan7x_eth_remove(struct udevice *dev);