blob: 03a35bcf73f111a1847341279e4062af5683dfcf [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0
Simon Glass2627c7e2016-03-11 22:07:26 -07002/*
3 * Copyright (c) 2016 Google, Inc
4 *
5 * From coreboot src/soc/intel/broadwell/romstage/raminit.c
Simon Glass2627c7e2016-03-11 22:07:26 -07006 */
7
8#include <common.h>
9#include <dm.h>
10#include <pci.h>
11#include <syscon.h>
12#include <asm/cpu.h>
13#include <asm/io.h>
14#include <asm/lpc_common.h>
15#include <asm/mrccache.h>
16#include <asm/mrc_common.h>
17#include <asm/mtrr.h>
18#include <asm/pci.h>
19#include <asm/arch/iomap.h>
20#include <asm/arch/me.h>
21#include <asm/arch/pch.h>
22#include <asm/arch/pei_data.h>
23#include <asm/arch/pm.h>
24
25ulong board_get_usable_ram_top(ulong total_size)
26{
27 return mrc_common_board_get_usable_ram_top(total_size);
28}
29
Simon Glass76b00ac2017-03-31 08:40:32 -060030int dram_init_banksize(void)
Simon Glass2627c7e2016-03-11 22:07:26 -070031{
32 mrc_common_dram_init_banksize();
Simon Glass76b00ac2017-03-31 08:40:32 -060033
34 return 0;
Simon Glass2627c7e2016-03-11 22:07:26 -070035}
36
37void broadwell_fill_pei_data(struct pei_data *pei_data)
38{
39 pei_data->pei_version = PEI_VERSION;
40 pei_data->board_type = BOARD_TYPE_ULT;
41 pei_data->pciexbar = MCFG_BASE_ADDRESS;
42 pei_data->smbusbar = SMBUS_BASE_ADDRESS;
43 pei_data->ehcibar = EARLY_EHCI_BAR;
44 pei_data->xhcibar = EARLY_XHCI_BAR;
45 pei_data->gttbar = EARLY_GTT_BAR;
46 pei_data->pmbase = ACPI_BASE_ADDRESS;
47 pei_data->gpiobase = GPIO_BASE_ADDRESS;
48 pei_data->tseg_size = CONFIG_SMM_TSEG_SIZE;
49 pei_data->temp_mmio_base = EARLY_TEMP_MMIO;
50 pei_data->tx_byte = sdram_console_tx_byte;
51 pei_data->ddr_refresh_2x = 1;
52}
53
54static inline void pei_data_usb2_port(struct pei_data *pei_data, int port,
55 uint16_t length, uint8_t enable,
56 uint8_t oc_pin, uint8_t location)
57{
58 pei_data->usb2_ports[port].length = length;
59 pei_data->usb2_ports[port].enable = enable;
60 pei_data->usb2_ports[port].oc_pin = oc_pin;
61 pei_data->usb2_ports[port].location = location;
62}
63
64static inline void pei_data_usb3_port(struct pei_data *pei_data, int port,
65 uint8_t enable, uint8_t oc_pin,
66 uint8_t fixed_eq)
67{
68 pei_data->usb3_ports[port].enable = enable;
69 pei_data->usb3_ports[port].oc_pin = oc_pin;
70 pei_data->usb3_ports[port].fixed_eq = fixed_eq;
71}
72
73void mainboard_fill_pei_data(struct pei_data *pei_data)
74{
75 /* DQ byte map for Samus board */
76 const u8 dq_map[2][6][2] = {
77 { { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
78 { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } },
79 { { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
80 { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } } };
81 /* DQS CPU<>DRAM map for Samus board */
82 const u8 dqs_map[2][8] = {
83 { 2, 0, 1, 3, 6, 4, 7, 5 },
84 { 2, 1, 0, 3, 6, 5, 4, 7 } };
85
86 pei_data->ec_present = 1;
87
88 /* One installed DIMM per channel */
89 pei_data->dimm_channel0_disabled = 2;
90 pei_data->dimm_channel1_disabled = 2;
91
92 memcpy(pei_data->dq_map, dq_map, sizeof(dq_map));
93 memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map));
94
95 /* P0: HOST PORT */
96 pei_data_usb2_port(pei_data, 0, 0x0080, 1, 0,
97 USB_PORT_BACK_PANEL);
98 /* P1: HOST PORT */
99 pei_data_usb2_port(pei_data, 1, 0x0080, 1, 1,
100 USB_PORT_BACK_PANEL);
101 /* P2: RAIDEN */
102 pei_data_usb2_port(pei_data, 2, 0x0080, 1, USB_OC_PIN_SKIP,
103 USB_PORT_BACK_PANEL);
104 /* P3: SD CARD */
105 pei_data_usb2_port(pei_data, 3, 0x0040, 1, USB_OC_PIN_SKIP,
106 USB_PORT_INTERNAL);
107 /* P4: RAIDEN */
108 pei_data_usb2_port(pei_data, 4, 0x0080, 1, USB_OC_PIN_SKIP,
109 USB_PORT_BACK_PANEL);
110 /* P5: WWAN (Disabled) */
111 pei_data_usb2_port(pei_data, 5, 0x0000, 0, USB_OC_PIN_SKIP,
112 USB_PORT_SKIP);
113 /* P6: CAMERA */
114 pei_data_usb2_port(pei_data, 6, 0x0040, 1, USB_OC_PIN_SKIP,
115 USB_PORT_INTERNAL);
116 /* P7: BT */
117 pei_data_usb2_port(pei_data, 7, 0x0040, 1, USB_OC_PIN_SKIP,
118 USB_PORT_INTERNAL);
119
120 /* P1: HOST PORT */
121 pei_data_usb3_port(pei_data, 0, 1, 0, 0);
122 /* P2: HOST PORT */
123 pei_data_usb3_port(pei_data, 1, 1, 1, 0);
124 /* P3: RAIDEN */
125 pei_data_usb3_port(pei_data, 2, 1, USB_OC_PIN_SKIP, 0);
126 /* P4: RAIDEN */
127 pei_data_usb3_port(pei_data, 3, 1, USB_OC_PIN_SKIP, 0);
128}
129
130static unsigned long get_top_of_ram(struct udevice *dev)
131{
132 /*
133 * Base of DPR is top of usable DRAM below 4GiB. The register has
134 * 1 MiB alignment and reports the TOP of the range, the base
135 * must be calculated from the size in MiB in bits 11:4.
136 */
137 u32 dpr, tom;
138
139 dm_pci_read_config32(dev, DPR, &dpr);
140 tom = dpr & ~((1 << 20) - 1);
141
142 debug("dpt %08x tom %08x\n", dpr, tom);
143 /* Subtract DMA Protected Range size if enabled */
144 if (dpr & DPR_EPM)
145 tom -= (dpr & DPR_SIZE_MASK) << 16;
146
147 return (unsigned long)tom;
148}
149
150/**
151 * sdram_find() - Find available memory
152 *
153 * This is a bit complicated since on x86 there are system memory holes all
154 * over the place. We create a list of available memory blocks
155 *
156 * @dev: Northbridge device
157 */
158static int sdram_find(struct udevice *dev)
159{
160 struct memory_info *info = &gd->arch.meminfo;
161 ulong top_of_ram;
162
163 top_of_ram = get_top_of_ram(dev);
164 mrc_add_memory_area(info, 0, top_of_ram);
165
166 /* Add MTRRs for memory */
167 mtrr_add_request(MTRR_TYPE_WRBACK, 0, 2ULL << 30);
168
169 return 0;
170}
171
172static int prepare_mrc_cache(struct pei_data *pei_data)
173{
174 struct mrc_data_container *mrc_cache;
175 struct mrc_region entry;
176 int ret;
177
178 ret = mrccache_get_region(NULL, &entry);
179 if (ret)
180 return ret;
181 mrc_cache = mrccache_find_current(&entry);
182 if (!mrc_cache)
183 return -ENOENT;
184
185 pei_data->saved_data = mrc_cache->data;
186 pei_data->saved_data_size = mrc_cache->data_size;
187 debug("%s: at %p, size %x checksum %04x\n", __func__,
188 pei_data->saved_data, pei_data->saved_data_size,
189 mrc_cache->checksum);
190
191 return 0;
192}
193
Simon Glass2627c7e2016-03-11 22:07:26 -0700194int dram_init(void)
195{
196 struct pei_data _pei_data __aligned(8);
197 struct pei_data *pei_data = &_pei_data;
198 struct udevice *dev, *me_dev, *pch_dev;
199 struct chipset_power_state ps;
200 const void *spd_data;
201 int ret, size;
202
203 memset(pei_data, '\0', sizeof(struct pei_data));
204
205 /* Print ME state before MRC */
206 ret = syscon_get_by_driver_data(X86_SYSCON_ME, &me_dev);
207 if (ret)
208 return ret;
209 intel_me_status(me_dev);
210
211 /* Save ME HSIO version */
212 ret = uclass_first_device(UCLASS_PCH, &pch_dev);
213 if (ret)
214 return ret;
215 if (!pch_dev)
216 return -ENODEV;
217 power_state_get(pch_dev, &ps);
218
219 intel_me_hsio_version(me_dev, &ps.hsio_version, &ps.hsio_checksum);
220
221 broadwell_fill_pei_data(pei_data);
222 mainboard_fill_pei_data(pei_data);
223
224 ret = uclass_first_device(UCLASS_NORTHBRIDGE, &dev);
225 if (ret)
226 return ret;
227 if (!dev)
228 return -ENODEV;
229 size = 256;
230 ret = mrc_locate_spd(dev, size, &spd_data);
231 if (ret)
232 return ret;
233 memcpy(pei_data->spd_data[0][0], spd_data, size);
234 memcpy(pei_data->spd_data[1][0], spd_data, size);
235
236 ret = prepare_mrc_cache(pei_data);
237 if (ret)
238 debug("prepare_mrc_cache failed: %d\n", ret);
239
240 debug("PEI version %#x\n", pei_data->pei_version);
241 ret = mrc_common_init(dev, pei_data, true);
242 if (ret)
243 return ret;
244 debug("Memory init done\n");
245
246 ret = sdram_find(dev);
247 if (ret)
248 return ret;
249 gd->ram_size = gd->arch.meminfo.total_32bit_memory;
250 debug("RAM size %llx\n", (unsigned long long)gd->ram_size);
251
252 debug("MRC output data length %#x at %p\n", pei_data->data_to_save_size,
253 pei_data->data_to_save);
254 /* S3 resume: don't save scrambler seed or MRC data */
255 if (pei_data->boot_mode != SLEEP_STATE_S3) {
256 /*
257 * This will be copied to SDRAM in reserve_arch(), then written
258 * to SPI flash in mrccache_save()
259 */
260 gd->arch.mrc_output = (char *)pei_data->data_to_save;
261 gd->arch.mrc_output_len = pei_data->data_to_save_size;
262 }
263 gd->arch.pei_meminfo = pei_data->meminfo;
264
265 return 0;
266}
267
268/* Use this hook to save our SDRAM parameters */
269int misc_init_r(void)
270{
271 int ret;
272
273 ret = mrccache_save();
274 if (ret)
275 printf("Unable to save MRC data: %d\n", ret);
276 else
277 debug("Saved MRC cache data\n");
278
279 return 0;
280}
281
282void board_debug_uart_init(void)
283{
284 struct udevice *bus = NULL;
285
286 /* com1 / com2 decode range */
287 pci_x86_write_config(bus, PCH_DEV_LPC, LPC_IO_DEC, 1 << 4, PCI_SIZE_16);
288
289 pci_x86_write_config(bus, PCH_DEV_LPC, LPC_EN, COMA_LPC_EN,
290 PCI_SIZE_16);
291}
292
293static const struct udevice_id broadwell_syscon_ids[] = {
294 { .compatible = "intel,me", .data = X86_SYSCON_ME },
Simon Glass2627c7e2016-03-11 22:07:26 -0700295 { }
296};
297
298U_BOOT_DRIVER(syscon_intel_me) = {
299 .name = "intel_me_syscon",
300 .id = UCLASS_SYSCON,
301 .of_match = broadwell_syscon_ids,
302};