| Philipp Tomsich | 399f3af | 2017-03-01 21:10:40 +0100 | [diff] [blame] | 1 | The /config node (Configuration Options) |
| 2 | ---------------------------------------- |
| 3 | |
| 4 | A number of run-time configuration options are provided in the /config node |
| 5 | of the control device tree. You can access these using fdtdec_get_config_int(), |
| 6 | fdtdec_get_config_bool() and fdtdec_get_config_string(). |
| 7 | |
| 8 | Available options are: |
| 9 | |
| 10 | silent-console |
| 11 | If present and non-zero, the console is silenced by default on boot. |
| 12 | |
| 13 | no-keyboard |
| 14 | Tells U-Boot not to expect an attached keyboard with a VGA console |
| Philipp Tomsich | e7dd02e | 2017-03-01 21:10:41 +0100 | [diff] [blame] | 15 | |
| 16 | u-boot,efi-partition-entries-offset |
| 17 | If present, this provides an offset (in bytes, from the start of a |
| 18 | device) that should be skipped over before the partition entries. |
| 19 | This is used by the EFI/GPT partition implementation when a device |
| 20 | is formatted. |
| 21 | |
| 22 | This setting will override any values configured via Kconfig. |
| Philipp Tomsich | f222b36 | 2017-04-17 17:45:12 +0200 | [diff] [blame] | 23 | |
| 24 | u-boot,spl-payload-offset |
| 25 | If present (and SPL is controlled by the device-tree), this allows |
| 26 | to override the CONFIG_SYS_SPI_U_BOOT_OFFS setting using a value |
| 27 | from the device-tree. |