Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 84d9ce560756a63c964e8172376a00c615d3d046 / . / arch / arm / dts / imx6ul-kontron-n6x1x-s.dts
blob: 84d8a717ab5571552b94111162d8465e8a7943e8 [file] [log] [blame]
Frieder Schrempfe6f48aa2021-09-29 16:42:41 +0200[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2017 exceet electronics GmbH
4 * Copyright (C) 2018 Kontron Electronics GmbH
5 * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
6 */
7
8/dts-v1/;
9
10#include <dt-bindings/gpio/gpio.h>
11#include "imx6ul-kontron-n6x1x-som.dtsi"
12
13/ {
14 gpio-leds {
15 compatible = "gpio-leds";
16 pinctrl-names = "default";
17 pinctrl-0 = <&pinctrl_gpio_leds>;
18
19 led1 {
20 label = "debug-led1";
21 gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
22 default-state = "off";
23 linux,default-trigger = "heartbeat";
24 };
25
26 led2 {
27 label = "debug-led2";
28 gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
29 default-state = "off";
30 };
31
32 led3 {
33 label = "debug-led3";
34 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
35 default-state = "off";
36 };
37 };
38
39 pwm-beeper {
40 compatible = "pwm-beeper";
41 pwms = <&pwm8 0 5000>;
42 };
43
44 reg_3v3: regulator-3v3 {
45 compatible = "regulator-fixed";
46 regulator-name = "3v3";
47 regulator-min-microvolt = <3300000>;
48 regulator-max-microvolt = <3300000>;
49 };
50
51 reg_5v: regulator-5v {
52 compatible = "regulator-fixed";
53 regulator-name = "5v";
54 regulator-min-microvolt = <5000000>;
55 regulator-max-microvolt = <5000000>;
56 };
57
58 reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
59 compatible = "regulator-fixed";
60 regulator-name = "usb_otg1_vbus";
61 regulator-min-microvolt = <5000000>;
62 regulator-max-microvolt = <5000000>;
63 gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
64 enable-active-high;
65 };
66
67 reg_vref_adc: regulator-vref-adc {
68 compatible = "regulator-fixed";
69 regulator-name = "vref-adc";
70 regulator-min-microvolt = <3300000>;
71 regulator-max-microvolt = <3300000>;
72 };
73};
74
75&adc1 {
76 pinctrl-names = "default";
77 pinctrl-0 = <&pinctrl_adc1>;
78 num-channels = <3>;
79 vref-supply = <&reg_vref_adc>;
80 status = "okay";
81};
82
83&can2 {
84 pinctrl-names = "default";
85 pinctrl-0 = <&pinctrl_flexcan2>;
86 status = "okay";
87};
88
89&ecspi1 {
90 cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
91 pinctrl-names = "default";
92 pinctrl-0 = <&pinctrl_ecspi1>;
93 status = "okay";
94
95 eeprom@0 {
96 compatible = "anvo,anv32e61w", "atmel,at25";
97 reg = <0>;
98 spi-max-frequency = <20000000>;
99 spi-cpha;
100 spi-cpol;
101 pagesize = <1>;
102 size = <8192>;
103 address-width = <16>;
104 };
105};
106
107&fec1 {
108 pinctrl-0 = <&pinctrl_enet1>;
109 /delete-node/ mdio;
110};
111
112&fec2 {
113 pinctrl-names = "default";
114 pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
115 phy-mode = "rmii";
116 phy-handle = <&ethphy2>;
117 status = "okay";
118
119 mdio {
120 #address-cells = <1>;
121 #size-cells = <0>;
122
123 ethphy1: ethernet-phy@1 {
124 reg = <1>;
125 micrel,led-mode = <0>;
126 clocks = <&clks IMX6UL_CLK_ENET_REF>;
127 clock-names = "rmii-ref";
128 };
129
130 ethphy2: ethernet-phy@2 {
131 reg = <2>;
132 micrel,led-mode = <0>;
133 clocks = <&clks IMX6UL_CLK_ENET2_REF>;
134 clock-names = "rmii-ref";
135 };
136 };
137};
138
139&i2c1 {
140 clock-frequency = <100000>;
141 pinctrl-names = "default";
142 pinctrl-0 = <&pinctrl_i2c1>;
143 status = "okay";
144};
145
146&i2c4 {
147 clock-frequency = <100000>;
148 pinctrl-names = "default";
149 pinctrl-0 = <&pinctrl_i2c4>;
150 status = "okay";
151
152 rtc@32 {
153 compatible = "epson,rx8900";
154 reg = <0x32>;
155 };
156};
157
158&pwm8 {
159 pinctrl-names = "default";
160 pinctrl-0 = <&pinctrl_pwm8>;
161 status = "okay";
162};
163
164&uart1 {
165 pinctrl-names = "default";
166 pinctrl-0 = <&pinctrl_uart1>;
167 status = "okay";
168};
169
170&uart2 {
171 pinctrl-names = "default";
172 pinctrl-0 = <&pinctrl_uart2>;
173 linux,rs485-enabled-at-boot-time;
174 rs485-rx-during-tx;
175 rs485-rts-active-low;
176 uart-has-rtscts;
177 status = "okay";
178};
179
180&uart3 {
181 pinctrl-names = "default";
182 pinctrl-0 = <&pinctrl_uart3>;
183 fsl,uart-has-rtscts;
184 status = "okay";
185};
186
187&uart4 {
188 pinctrl-names = "default";
189 pinctrl-0 = <&pinctrl_uart4>;
190 status = "okay";
191};
192
193&usbotg1 {
194 pinctrl-names = "default";
195 pinctrl-0 = <&pinctrl_usbotg1>;
196 dr_mode = "otg";
197 srp-disable;
198 hnp-disable;
199 adp-disable;
200 over-current-active-low;
201 vbus-supply = <&reg_usb_otg1_vbus>;
202 status = "okay";
203};
204
205&usbotg2 {
206 dr_mode = "host";
207 disable-over-current;
208 vbus-supply = <&reg_5v>;
209 status = "okay";
210};
211
212&usdhc1 {
213 pinctrl-names = "default";
214 pinctrl-0 = <&pinctrl_usdhc1>;
215 cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
216 keep-power-in-suspend;
217 wakeup-source;
218 vmmc-supply = <&reg_3v3>;
219 voltage-ranges = <3300 3300>;
220 bus-width = <4>;
221 no-1-8-v;
222 status = "okay";
223};
224
225&usdhc2 {
226 pinctrl-names = "default", "state_100mhz", "state_200mhz";
227 pinctrl-0 = <&pinctrl_usdhc2>;
228 pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
229 pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
230 non-removable;
231 keep-power-in-suspend;
232 wakeup-source;
233 vmmc-supply = <&reg_3v3>;
234 voltage-ranges = <3300 3300>;
235 bus-width = <4>;
236 no-1-8-v;
237 status = "okay";
238};
239
240&wdog1 {
241 pinctrl-names = "default";
242 pinctrl-0 = <&pinctrl_wdog>;
243 fsl,ext-reset-output;
244 status = "okay";
245};
246
247&iomuxc {
248 pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
249
250 pinctrl_adc1: adc1grp {
251 fsl,pins = <
252 MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
253 MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
254 MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0
255 >;
256 };
257
258 pinctrl_ecspi1: ecspi1grp {
259 fsl,pins = <
260 MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1
261 MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1
262 MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1
263 MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */
264 >;
265 };
266
267 pinctrl_enet2: enet2grp {
268 fsl,pins = <
269 MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
270 MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
271 MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
272 MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
273 MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
274 MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
275 MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
276 MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009
277 >;
278 };
279
280 pinctrl_enet2_mdio: enet2mdiogrp {
281 fsl,pins = <
282 MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
283 MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
284 >;
285 };
286
287 pinctrl_flexcan2: flexcan2grp{
288 fsl,pins = <
289 MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
290 MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
291 >;
292 };
293
294 pinctrl_gpio: gpiogrp {
295 fsl,pins = <
296 MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */
297 MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */
298 MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */
299 MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */
300 >;
301 };
302
303 pinctrl_gpio_leds: gpioledsgrp {
304 fsl,pins = <
305 MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */
306 MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */
307 MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */
308 >;
309 };
310
311 pinctrl_i2c1: i2c1grp {
312 fsl,pins = <
313 MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0
314 MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0
315 >;
316 };
317
318 pinctrl_i2c4: i2c4grp {
319 fsl,pins = <
320 MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0
321 MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0
322 >;
323 };
324
325 pinctrl_pwm8: pwm8grp {
326 fsl,pins = <
327 MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0
328 >;
329 };
330
331 pinctrl_uart1: uart1grp {
332 fsl,pins = <
333 MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
334 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
335 >;
336 };
337
338 pinctrl_uart2: uart2grp {
339 fsl,pins = <
340 MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1
341 MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1
342 MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1
343 /*
344 * mux unused RTS to make sure it doesn't cause
345 * any interrupts when it is undefined
346 */
347 MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1
348 >;
349 };
350
351 pinctrl_uart3: uart3grp {
352 fsl,pins = <
353 MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
354 MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
355 MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1
356 MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1
357 >;
358 };
359
360 pinctrl_uart4: uart4grp {
361 fsl,pins = <
362 MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1
363 MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1
364 >;
365 };
366
367 pinctrl_usbotg1: usbotg1 {
368 fsl,pins = <
369 MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0
370 >;
371 };
372
373 pinctrl_usdhc1: usdhc1grp {
374 fsl,pins = <
375 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
376 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
377 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
378 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
379 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
380 MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
381 MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */
382 >;
383 };
384
385 pinctrl_usdhc2: usdhc2grp {
386 fsl,pins = <
387 MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059
388 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
389 MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
390 MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
391 MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
392 MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
393 >;
394 };
395
396 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
397 fsl,pins = <
398 MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9
399 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9
400 MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9
401 MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9
402 MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9
403 MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9
404 >;
405 };
406
407 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
408 fsl,pins = <
409 MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
410 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
411 MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
412 MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
413 MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
414 MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
415 >;
416 };
417
418 pinctrl_wdog: wdoggrp {
419 fsl,pins = <
420 MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0
421 >;
422 };
423};