blob: f3cb297fd1db3d22c4510aa8d0da8ee3d88d18e2 [file] [log] [blame]
Hans de Goede53ab4af2015-04-15 19:03:49 +02001/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
Hans de Goede53ab4af2015-04-15 19:03:49 +020019 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun4i-a10.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48
49/ {
50 model = "BA10 tvbox";
51 compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
52
53 aliases {
54 serial0 = &uart0;
55 };
56
57 chosen {
58 stdout-path = "serial0:115200n8";
59 };
60};
61
62&ehci0 {
63 status = "okay";
64};
65
66&ehci1 {
67 status = "okay";
68};
69
70&emac {
71 pinctrl-names = "default";
72 pinctrl-0 = <&emac_pins_a>;
73 phy = <&phy1>;
74 status = "okay";
75};
76
Hans de Goede8b1ba942015-06-02 15:53:40 +020077&emac_sram {
78 status = "okay";
79};
80
Hans de Goede53ab4af2015-04-15 19:03:49 +020081&i2c0 {
82 pinctrl-names = "default";
83 pinctrl-0 = <&i2c0_pins_a>;
84 status = "okay";
85
86 axp209: pmic@34 {
87 compatible = "x-powers,axp209";
88 reg = <0x34>;
89 interrupts = <0>;
90
91 interrupt-controller;
92 #interrupt-cells = <1>;
93 };
94};
95
96&ir0 {
97 pinctrl-names = "default";
Hans de Goede8b1ba942015-06-02 15:53:40 +020098 pinctrl-0 = <&ir0_rx_pins_a>;
Hans de Goede53ab4af2015-04-15 19:03:49 +020099 status = "okay";
100};
101
102&mdio {
103 status = "okay";
104
105 phy1: ethernet-phy@1 {
106 reg = <1>;
107 };
108};
109
110&mmc0 {
111 pinctrl-names = "default";
112 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
113 vmmc-supply = <&reg_vcc3v3>;
114 bus-width = <4>;
115 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
116 cd-inverted;
117 status = "okay";
118};
119
120&ohci0 {
121 status = "okay";
122};
123
124&ohci1 {
125 status = "okay";
126};
127
Hans de Goededa52a4a2015-08-05 17:39:14 +0200128&otg_sram {
129 status = "okay";
130};
131
Hans de Goede53ab4af2015-04-15 19:03:49 +0200132&pio {
133 usb2_vbus_pin_a: usb2_vbus_pin@0 {
134 allwinner,pins = "PH12";
135 };
136};
137
Hans de Goededa52a4a2015-08-05 17:39:14 +0200138&reg_usb0_vbus {
139 regulator-boot-on;
140 status = "okay";
141};
142
Hans de Goede53ab4af2015-04-15 19:03:49 +0200143&reg_usb1_vbus {
144 status = "okay";
145};
146
147&reg_usb2_vbus {
148 gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
149 status = "okay";
150};
151
152&uart0 {
153 pinctrl-names = "default";
154 pinctrl-0 = <&uart0_pins_a>;
155 status = "okay";
156};
157
Hans de Goededa52a4a2015-08-05 17:39:14 +0200158&usb_otg {
159 dr_mode = "host";
160 status = "okay";
161};
162
Hans de Goede53ab4af2015-04-15 19:03:49 +0200163&usbphy {
Hans de Goededa52a4a2015-08-05 17:39:14 +0200164 usb0_vbus-supply = <&reg_usb0_vbus>;
Hans de Goede53ab4af2015-04-15 19:03:49 +0200165 usb1_vbus-supply = <&reg_usb1_vbus>;
166 usb2_vbus-supply = <&reg_usb2_vbus>;
167 status = "okay";
168};