blob: 29c344c63a957fd6850f0988ac203ab4277c82d4 [file] [log] [blame]
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +05301/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * Copyright 2018 NXP
4 */
5
6#ifndef __LS1012AFRWY_H__
7#define __LS1012AFRWY_H__
8
9#include "ls1012a_common.h"
10
Biwen Lic8a7cad2020-03-20 17:05:51 +080011#undef CONFIG_SYS_BOARD
12#define CONFIG_SYS_BOARD "ls1012afrwy"
13
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053014/* Board Rev*/
Pramod Kumar1deae0c2018-08-14 09:49:55 +053015#define BOARD_REV_A_B 0x0
16#define BOARD_REV_C 0x00080000
17#define BOARD_REV_MASK 0x001A0000
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053018/* DDR */
19#define CONFIG_DIMM_SLOTS_PER_CTLR 1
20#define CONFIG_CHIP_SELECTS_PER_CTRL 1
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053021#define SYS_SDRAM_SIZE_512 0x20000000
22#define SYS_SDRAM_SIZE_1024 0x40000000
23#define CONFIG_CHIP_SELECTS_PER_CTRL 1
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053024
Kuldeep Singh6972c602019-09-30 12:38:34 +053025/* ENV */
26#define CONFIG_SYS_FSL_QSPI_BASE 0x40000000
Kuldeep Singh6972c602019-09-30 12:38:34 +053027
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053028#ifndef CONFIG_SPL_BUILD
29#undef BOOT_TARGET_DEVICES
30#define BOOT_TARGET_DEVICES(func) \
31 func(MMC, mmc, 0) \
Biwen Lifad129f2020-04-22 18:06:58 +080032 func(USB, usb, 0) \
33 func(DHCP, dhcp, na)
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053034#endif
35
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053036/* MMC */
37#ifdef CONFIG_MMC
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053038#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
39#endif
40
41#define CONFIG_PCIE1 /* PCIE controller 1 */
42
43#define CONFIG_PCI_SCAN_SHOW
44
45#undef CONFIG_EXTRA_ENV_SETTINGS
46#define CONFIG_EXTRA_ENV_SETTINGS \
47 "verify=no\0" \
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053048 "initrd_high=0xffffffffffffffff\0" \
49 "fdt_addr=0x00f00000\0" \
50 "kernel_addr=0x01000000\0" \
Vinitha V Pillai2d91b532018-05-23 11:03:31 +053051 "kernel_size_sd=0x16000\0" \
52 "kernelhdr_size_sd=0x10\0" \
53 "kernel_addr_sd=0x8000\0" \
54 "kernelhdr_addr_sd=0x4000\0" \
55 "kernelheader_addr=0x1fc000\0" \
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053056 "kernelheader_addr=0x1fc000\0" \
57 "scriptaddr=0x80000000\0" \
58 "scripthdraddr=0x80080000\0" \
59 "fdtheader_addr_r=0x80100000\0" \
60 "kernelheader_addr_r=0x80200000\0" \
Vinitha V Pillai2d91b532018-05-23 11:03:31 +053061 "kernelheader_size=0x40000\0" \
Biwen Li1d0bb1b2020-03-20 18:26:14 +080062 "kernel_addr_r=0x92000000\0" \
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053063 "fdt_addr_r=0x90000000\0" \
Biwen Li095b6be2020-03-13 10:26:29 +080064 "load_addr=0x92000000\0" \
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053065 "kernel_size=0x2800000\0" \
66 "kernelheader_size=0x40000\0" \
Udit Agarwal3fba2312020-06-08 18:55:44 +053067 "bootm_size=0x10000000\0" \
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053068 "console=ttyS0,115200\0" \
Biwen Li5706b9b2020-03-24 11:19:01 +080069 "BOARD=ls1012afrwy\0" \
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053070 BOOTENV \
71 "boot_scripts=ls1012afrwy_boot.scr\0" \
72 "boot_script_hdr=hdr_ls1012afrwy_bs.out\0" \
73 "scan_dev_for_boot_part=" \
74 "part list ${devtype} ${devnum} devplist; " \
75 "env exists devplist || setenv devplist 1; " \
76 "for distro_bootpart in ${devplist}; do " \
77 "if fstype ${devtype} " \
78 "${devnum}:${distro_bootpart} " \
79 "bootfstype; then " \
80 "run scan_dev_for_boot; " \
81 "fi; " \
82 "done\0" \
83 "scan_dev_for_boot=" \
84 "echo Scanning ${devtype} " \
85 "${devnum}:${distro_bootpart}...; " \
86 "for prefix in ${boot_prefixes}; do " \
87 "run scan_dev_for_scripts; " \
88 "done;" \
89 "\0" \
90 "boot_a_script=" \
91 "load ${devtype} ${devnum}:${distro_bootpart} " \
92 "${scriptaddr} ${prefix}${script}; " \
93 "env exists secureboot && load ${devtype} " \
94 "${devnum}:${distro_bootpart} " \
Vinitha V Pillai78c58082019-04-23 05:52:17 +000095 "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
96 "env exists secureboot " \
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053097 "&& esbc_validate ${scripthdraddr};" \
98 "source ${scriptaddr}\0" \
Biwen Lia3c98052019-11-15 15:10:14 +080099 "sd_bootcmd=pfe stop; echo Trying load from sd card..;" \
Vinitha V Pillai2d91b532018-05-23 11:03:31 +0530100 "mmcinfo; mmc read $load_addr " \
101 "$kernel_addr_sd $kernel_size_sd ;" \
102 "env exists secureboot && mmc read $kernelheader_addr_r "\
103 "$kernelhdr_addr_sd $kernelhdr_size_sd " \
104 " && esbc_validate ${kernelheader_addr_r};" \
Biwen Li5706b9b2020-03-24 11:19:01 +0800105 "bootm $load_addr#$BOARD\0"
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +0530106
107#undef CONFIG_BOOTCOMMAND
Rajesh Bhagat7f91b652018-11-05 18:03:08 +0000108#ifdef CONFIG_TFABOOT
109#undef QSPI_NOR_BOOTCOMMAND
110#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
111 "env exists secureboot && esbc_halt;"
112#else
Vinitha V Pillai2d91b532018-05-23 11:03:31 +0530113#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +0530114 "env exists secureboot && esbc_halt;"
Rajesh Bhagat7f91b652018-11-05 18:03:08 +0000115#endif
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +0530116
117#include <asm/fsl_secure_boot.h>
118
Vinitha V Pillai2d91b532018-05-23 11:03:31 +0530119#include <asm/fsl_secure_boot.h>
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +0530120#endif /* __LS1012AFRWY_H__ */