Andy Yan | a4bbc66 | 2019-09-22 18:06:56 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com> |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | #include <dt-bindings/input/linux-event-codes.h> |
| 8 | #include <dt-bindings/pwm/pwm.h> |
| 9 | #include "rk3399.dtsi" |
| 10 | #include "rk3399-opp.dtsi" |
| 11 | |
| 12 | / { |
| 13 | model = "Leez RK3399 P710"; |
| 14 | compatible = "leez,p710", "rockchip,rk3399"; |
| 15 | |
| 16 | chosen { |
| 17 | stdout-path = "serial2:1500000n8"; |
| 18 | }; |
| 19 | |
| 20 | clkin_gmac: external-gmac-clock { |
| 21 | compatible = "fixed-clock"; |
| 22 | clock-frequency = <125000000>; |
| 23 | clock-output-names = "clkin_gmac"; |
| 24 | #clock-cells = <0>; |
| 25 | }; |
| 26 | |
| 27 | sdio_pwrseq: sdio-pwrseq { |
| 28 | compatible = "mmc-pwrseq-simple"; |
| 29 | clocks = <&rk808 1>; |
| 30 | clock-names = "ext_clock"; |
| 31 | pinctrl-names = "default"; |
| 32 | pinctrl-0 = <&wifi_reg_on_h>; |
| 33 | reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; |
| 34 | }; |
| 35 | |
| 36 | dc5v_adp: dc5v-adp { |
| 37 | compatible = "regulator-fixed"; |
| 38 | regulator-name = "dc5v_adapter"; |
| 39 | regulator-always-on; |
| 40 | regulator-boot-on; |
| 41 | regulator-min-microvolt = <5000000>; |
| 42 | regulator-max-microvolt = <5000000>; |
| 43 | }; |
| 44 | |
Jagan Teki | 167efc2 | 2020-04-28 15:30:17 +0530 | [diff] [blame] | 45 | vcc3v3_lan: vcc3v3-lan { |
Andy Yan | a4bbc66 | 2019-09-22 18:06:56 +0800 | [diff] [blame] | 46 | compatible = "regulator-fixed"; |
Jagan Teki | 167efc2 | 2020-04-28 15:30:17 +0530 | [diff] [blame] | 47 | regulator-name = "vcc3v3_lan"; |
Andy Yan | a4bbc66 | 2019-09-22 18:06:56 +0800 | [diff] [blame] | 48 | regulator-always-on; |
| 49 | regulator-boot-on; |
Jagan Teki | 167efc2 | 2020-04-28 15:30:17 +0530 | [diff] [blame] | 50 | regulator-min-microvolt = <3300000>; |
| 51 | regulator-max-microvolt = <3300000>; |
| 52 | vim-supply = <&vcc3v3_sys>; |
Andy Yan | a4bbc66 | 2019-09-22 18:06:56 +0800 | [diff] [blame] | 53 | }; |
| 54 | |
| 55 | vcc3v3_sys: vcc3v3-sys { |
| 56 | compatible = "regulator-fixed"; |
| 57 | regulator-name = "vcc3v3_sys"; |
| 58 | regulator-always-on; |
| 59 | regulator-boot-on; |
| 60 | regulator-min-microvolt = <3300000>; |
| 61 | regulator-max-microvolt = <3300000>; |
| 62 | vin-supply = <&vcc5v0_sys>; |
| 63 | }; |
| 64 | |
| 65 | vcc5v0_host0: vcc5v0_host1: vcc5v0-host { |
| 66 | compatible = "regulator-fixed"; |
| 67 | regulator-name = "vcc5v0_host"; |
| 68 | regulator-boot-on; |
| 69 | regulator-always-on; |
| 70 | regulator-min-microvolt = <5500000>; |
| 71 | regulator-max-microvolt = <5500000>; |
| 72 | vin-supply = <&vcc5v0_sys>; |
| 73 | }; |
| 74 | |
| 75 | vcc5v0_host3: vcc5v0-host3 { |
| 76 | compatible = "regulator-fixed"; |
| 77 | regulator-name = "vcc5v0_host3"; |
| 78 | enable-active-high; |
| 79 | gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; |
| 80 | pinctrl-names = "default"; |
| 81 | pinctrl-0 = <&vcc5v0_host3_en>; |
| 82 | regulator-always-on; |
| 83 | vin-supply = <&vcc5v0_sys>; |
| 84 | }; |
| 85 | |
Jagan Teki | 167efc2 | 2020-04-28 15:30:17 +0530 | [diff] [blame] | 86 | vcc5v0_sys: vcc5v0-sys { |
Andy Yan | a4bbc66 | 2019-09-22 18:06:56 +0800 | [diff] [blame] | 87 | compatible = "regulator-fixed"; |
Jagan Teki | 167efc2 | 2020-04-28 15:30:17 +0530 | [diff] [blame] | 88 | regulator-name = "vcc5v0_sys"; |
Andy Yan | a4bbc66 | 2019-09-22 18:06:56 +0800 | [diff] [blame] | 89 | regulator-always-on; |
| 90 | regulator-boot-on; |
Jagan Teki | 167efc2 | 2020-04-28 15:30:17 +0530 | [diff] [blame] | 91 | regulator-min-microvolt = <5000000>; |
| 92 | regulator-max-microvolt = <5000000>; |
| 93 | vin-supply = <&dc5v_adp>; |
Andy Yan | a4bbc66 | 2019-09-22 18:06:56 +0800 | [diff] [blame] | 94 | }; |
| 95 | |
| 96 | vdd_log: vdd-log { |
| 97 | compatible = "pwm-regulator"; |
| 98 | pwms = <&pwm2 0 25000 1>; |
| 99 | regulator-name = "vdd_log"; |
| 100 | regulator-always-on; |
| 101 | regulator-boot-on; |
| 102 | regulator-min-microvolt = <800000>; |
| 103 | regulator-max-microvolt = <1400000>; |
| 104 | vin-supply = <&vcc5v0_sys>; |
| 105 | }; |
| 106 | }; |
| 107 | |
| 108 | &cpu_l0 { |
| 109 | cpu-supply = <&vdd_cpu_l>; |
| 110 | }; |
| 111 | |
| 112 | &cpu_l1 { |
| 113 | cpu-supply = <&vdd_cpu_l>; |
| 114 | }; |
| 115 | |
| 116 | &cpu_l2 { |
| 117 | cpu-supply = <&vdd_cpu_l>; |
| 118 | }; |
| 119 | |
| 120 | &cpu_l3 { |
| 121 | cpu-supply = <&vdd_cpu_l>; |
| 122 | }; |
| 123 | |
| 124 | &cpu_b0 { |
| 125 | cpu-supply = <&vdd_cpu_b>; |
| 126 | }; |
| 127 | |
| 128 | &cpu_b1 { |
| 129 | cpu-supply = <&vdd_cpu_b>; |
| 130 | }; |
| 131 | |
| 132 | &emmc_phy { |
| 133 | status = "okay"; |
| 134 | }; |
| 135 | |
| 136 | &gmac { |
| 137 | assigned-clocks = <&cru SCLK_RMII_SRC>; |
| 138 | assigned-clock-parents = <&clkin_gmac>; |
| 139 | clock_in_out = "input"; |
| 140 | phy-supply = <&vcc3v3_lan>; |
| 141 | phy-mode = "rgmii"; |
| 142 | pinctrl-names = "default"; |
| 143 | pinctrl-0 = <&rgmii_pins>; |
| 144 | snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; |
| 145 | snps,reset-active-low; |
| 146 | snps,reset-delays-us = <0 10000 50000>; |
| 147 | tx_delay = <0x28>; |
| 148 | rx_delay = <0x11>; |
| 149 | status = "okay"; |
| 150 | }; |
| 151 | |
| 152 | &gpu { |
| 153 | mali-supply = <&vdd_gpu>; |
| 154 | status = "okay"; |
| 155 | }; |
| 156 | |
| 157 | &hdmi { |
| 158 | ddc-i2c-bus = <&i2c7>; |
| 159 | pinctrl-names = "default"; |
| 160 | pinctrl-0 = <&hdmi_cec>; |
| 161 | status = "okay"; |
| 162 | }; |
| 163 | |
| 164 | &hdmi_sound { |
| 165 | status = "okay"; |
| 166 | }; |
| 167 | |
| 168 | &i2c0 { |
| 169 | clock-frequency = <400000>; |
| 170 | i2c-scl-rising-time-ns = <168>; |
| 171 | i2c-scl-falling-time-ns = <4>; |
| 172 | status = "okay"; |
| 173 | |
| 174 | rk808: pmic@1b { |
| 175 | compatible = "rockchip,rk808"; |
| 176 | reg = <0x1b>; |
| 177 | interrupt-parent = <&gpio1>; |
| 178 | interrupts = <21 IRQ_TYPE_LEVEL_LOW>; |
| 179 | #clock-cells = <1>; |
| 180 | clock-output-names = "xin32k", "rk808-clkout2"; |
| 181 | pinctrl-names = "default"; |
| 182 | pinctrl-0 = <&pmic_int_l>; |
| 183 | rockchip,system-power-controller; |
| 184 | wakeup-source; |
| 185 | |
| 186 | vcc1-supply = <&vcc5v0_sys>; |
| 187 | vcc2-supply = <&vcc5v0_sys>; |
| 188 | vcc3-supply = <&vcc5v0_sys>; |
| 189 | vcc4-supply = <&vcc5v0_sys>; |
| 190 | vcc6-supply = <&vcc5v0_sys>; |
| 191 | vcc7-supply = <&vcc5v0_sys>; |
| 192 | vcc8-supply = <&vcc3v3_sys>; |
| 193 | vcc9-supply = <&vcc5v0_sys>; |
| 194 | vcc10-supply = <&vcc5v0_sys>; |
| 195 | vcc11-supply = <&vcc5v0_sys>; |
| 196 | vcc12-supply = <&vcc3v3_sys>; |
| 197 | vddio-supply = <&vcc_1v8>; |
| 198 | |
| 199 | regulators { |
| 200 | vdd_center: DCDC_REG1 { |
| 201 | regulator-name = "vdd_center"; |
| 202 | regulator-always-on; |
| 203 | regulator-boot-on; |
| 204 | regulator-min-microvolt = <750000>; |
| 205 | regulator-max-microvolt = <1350000>; |
| 206 | regulator-ramp-delay = <6001>; |
| 207 | regulator-state-mem { |
| 208 | regulator-off-in-suspend; |
| 209 | }; |
| 210 | }; |
| 211 | |
| 212 | vdd_cpu_l: DCDC_REG2 { |
| 213 | regulator-name = "vdd_cpu_l"; |
| 214 | regulator-always-on; |
| 215 | regulator-boot-on; |
| 216 | regulator-min-microvolt = <750000>; |
| 217 | regulator-max-microvolt = <1350000>; |
| 218 | regulator-ramp-delay = <6001>; |
| 219 | regulator-state-mem { |
| 220 | regulator-off-in-suspend; |
| 221 | }; |
| 222 | }; |
| 223 | |
| 224 | vcc_ddr: DCDC_REG3 { |
| 225 | regulator-name = "vcc_ddr"; |
| 226 | regulator-always-on; |
| 227 | regulator-boot-on; |
| 228 | regulator-state-mem { |
| 229 | regulator-on-in-suspend; |
| 230 | }; |
| 231 | }; |
| 232 | |
| 233 | vcc_1v8: DCDC_REG4 { |
| 234 | regulator-name = "vcc_1v8"; |
| 235 | regulator-always-on; |
| 236 | regulator-boot-on; |
| 237 | regulator-min-microvolt = <1800000>; |
| 238 | regulator-max-microvolt = <1800000>; |
| 239 | regulator-state-mem { |
| 240 | regulator-on-in-suspend; |
| 241 | regulator-suspend-microvolt = <1800000>; |
| 242 | }; |
| 243 | }; |
| 244 | |
| 245 | vcc1v8_dvp: LDO_REG1 { |
| 246 | regulator-name = "vcc1v8_dvp"; |
| 247 | regulator-always-on; |
| 248 | regulator-boot-on; |
| 249 | regulator-min-microvolt = <1800000>; |
| 250 | regulator-max-microvolt = <1800000>; |
| 251 | regulator-state-mem { |
| 252 | regulator-off-in-suspend; |
| 253 | }; |
| 254 | }; |
| 255 | |
| 256 | vcc1v8_hdmi: LDO_REG2 { |
| 257 | regulator-name = "vcc1v8_hdmi"; |
| 258 | regulator-always-on; |
| 259 | regulator-boot-on; |
| 260 | regulator-min-microvolt = <1800000>; |
| 261 | regulator-max-microvolt = <1800000>; |
| 262 | regulator-state-mem { |
| 263 | regulator-off-in-suspend; |
| 264 | }; |
| 265 | }; |
| 266 | |
| 267 | vcca_1v8: LDO_REG3 { |
| 268 | regulator-name = "vcca_1v8"; |
| 269 | regulator-always-on; |
| 270 | regulator-boot-on; |
| 271 | regulator-min-microvolt = <1800000>; |
| 272 | regulator-max-microvolt = <1800000>; |
| 273 | regulator-state-mem { |
| 274 | regulator-on-in-suspend; |
| 275 | regulator-suspend-microvolt = <1800000>; |
| 276 | }; |
| 277 | }; |
| 278 | |
| 279 | vccio_sd: LDO_REG4 { |
| 280 | regulator-name = "vccio_sd"; |
| 281 | regulator-always-on; |
| 282 | regulator-boot-on; |
| 283 | regulator-min-microvolt = <3000000>; |
| 284 | regulator-max-microvolt = <3000000>; |
| 285 | regulator-state-mem { |
| 286 | regulator-on-in-suspend; |
| 287 | regulator-suspend-microvolt = <3000000>; |
| 288 | }; |
| 289 | }; |
| 290 | |
| 291 | vcca3v0_codec: LDO_REG5 { |
| 292 | regulator-name = "vcca3v0_codec"; |
| 293 | regulator-always-on; |
| 294 | regulator-boot-on; |
| 295 | regulator-min-microvolt = <3000000>; |
| 296 | regulator-max-microvolt = <3000000>; |
| 297 | regulator-state-mem { |
| 298 | regulator-off-in-suspend; |
| 299 | }; |
| 300 | }; |
| 301 | |
| 302 | vcc_1v5: LDO_REG6 { |
| 303 | regulator-name = "vcc_1v5"; |
| 304 | regulator-always-on; |
| 305 | regulator-boot-on; |
| 306 | regulator-min-microvolt = <1500000>; |
| 307 | regulator-max-microvolt = <1500000>; |
| 308 | regulator-state-mem { |
| 309 | regulator-on-in-suspend; |
| 310 | regulator-suspend-microvolt = <1500000>; |
| 311 | }; |
| 312 | }; |
| 313 | |
| 314 | vcc0v9_hdmi: LDO_REG7 { |
| 315 | regulator-name = "vcc0v9_hdmi"; |
| 316 | regulator-always-on; |
| 317 | regulator-boot-on; |
| 318 | regulator-min-microvolt = <900000>; |
| 319 | regulator-max-microvolt = <900000>; |
| 320 | regulator-state-mem { |
| 321 | regulator-off-in-suspend; |
| 322 | }; |
| 323 | }; |
| 324 | |
| 325 | vcc_3v0: LDO_REG8 { |
| 326 | regulator-name = "vcc_3v0"; |
| 327 | regulator-always-on; |
| 328 | regulator-boot-on; |
| 329 | regulator-min-microvolt = <3000000>; |
| 330 | regulator-max-microvolt = <3000000>; |
| 331 | regulator-state-mem { |
| 332 | regulator-on-in-suspend; |
| 333 | regulator-suspend-microvolt = <3000000>; |
| 334 | }; |
| 335 | }; |
| 336 | }; |
| 337 | }; |
| 338 | |
| 339 | vdd_cpu_b: regulator@40 { |
| 340 | compatible = "silergy,syr827"; |
| 341 | reg = <0x40>; |
| 342 | fcs,suspend-voltage-selector = <1>; |
| 343 | pinctrl-names = "default"; |
| 344 | pinctrl-0 = <&vsel1_gpio>; |
| 345 | regulator-name = "vdd_cpu_b"; |
| 346 | regulator-min-microvolt = <712500>; |
| 347 | regulator-max-microvolt = <1500000>; |
| 348 | regulator-ramp-delay = <1000>; |
| 349 | regulator-always-on; |
| 350 | regulator-boot-on; |
| 351 | vin-supply = <&vcc5v0_sys>; |
| 352 | |
| 353 | regulator-state-mem { |
| 354 | regulator-off-in-suspend; |
| 355 | }; |
| 356 | }; |
| 357 | |
| 358 | vdd_gpu: regulator@41 { |
| 359 | compatible = "silergy,syr828"; |
| 360 | reg = <0x41>; |
| 361 | fcs,suspend-voltage-selector = <1>; |
| 362 | pinctrl-names = "default"; |
| 363 | pinctrl-0 = <&vsel2_gpio>; |
| 364 | regulator-name = "vdd_gpu"; |
| 365 | regulator-min-microvolt = <712500>; |
| 366 | regulator-max-microvolt = <1500000>; |
| 367 | regulator-ramp-delay = <1000>; |
| 368 | regulator-always-on; |
| 369 | regulator-boot-on; |
| 370 | vin-supply = <&vcc5v0_sys>; |
| 371 | |
| 372 | regulator-state-mem { |
| 373 | regulator-off-in-suspend; |
| 374 | }; |
| 375 | }; |
| 376 | }; |
| 377 | |
| 378 | &i2c1 { |
| 379 | i2c-scl-rising-time-ns = <300>; |
| 380 | i2c-scl-falling-time-ns = <15>; |
| 381 | status = "okay"; |
| 382 | }; |
| 383 | |
| 384 | &i2c3 { |
| 385 | i2c-scl-rising-time-ns = <450>; |
| 386 | i2c-scl-falling-time-ns = <15>; |
| 387 | status = "okay"; |
| 388 | }; |
| 389 | |
| 390 | &i2c4 { |
| 391 | i2c-scl-rising-time-ns = <600>; |
| 392 | i2c-scl-falling-time-ns = <20>; |
| 393 | status = "okay"; |
| 394 | }; |
| 395 | |
| 396 | &i2c7 { |
| 397 | status = "okay"; |
| 398 | }; |
| 399 | |
| 400 | &i2s0 { |
| 401 | rockchip,playback-channels = <8>; |
| 402 | rockchip,capture-channels = <8>; |
| 403 | status = "okay"; |
| 404 | }; |
| 405 | |
| 406 | &i2s1 { |
| 407 | rockchip,playback-channels = <2>; |
| 408 | rockchip,capture-channels = <2>; |
| 409 | status = "okay"; |
| 410 | }; |
| 411 | |
| 412 | &i2s2 { |
| 413 | status = "okay"; |
| 414 | }; |
| 415 | |
| 416 | &io_domains { |
| 417 | status = "okay"; |
| 418 | |
| 419 | bt656-supply = <&vcc1v8_dvp>; |
| 420 | audio-supply = <&vcc_1v8>; |
| 421 | sdmmc-supply = <&vccio_sd>; |
| 422 | gpio1830-supply = <&vcc_3v0>; |
| 423 | }; |
| 424 | |
| 425 | &pmu_io_domains { |
| 426 | status = "okay"; |
| 427 | pmu1830-supply = <&vcc_3v0>; |
| 428 | }; |
| 429 | |
| 430 | &pinctrl { |
| 431 | bt { |
| 432 | bt_reg_on_h: bt-reg-on-h { |
| 433 | rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 434 | }; |
| 435 | |
| 436 | bt_host_wake_l: bt-host-wake-l { |
| 437 | rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 438 | }; |
| 439 | |
| 440 | bt_wake_l: bt-wake-l { |
| 441 | rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 442 | }; |
| 443 | }; |
| 444 | |
| 445 | pmic { |
| 446 | pmic_int_l: pmic-int-l { |
| 447 | rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 448 | }; |
| 449 | |
| 450 | vsel1_gpio: vsel1-gpio { |
| 451 | rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; |
| 452 | }; |
| 453 | |
| 454 | vsel2_gpio: vsel2-gpio { |
| 455 | rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; |
| 456 | }; |
| 457 | }; |
| 458 | |
| 459 | usb2 { |
| 460 | vcc5v0_host3_en: vcc5v0-host3-en { |
| 461 | rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 462 | }; |
| 463 | }; |
| 464 | |
| 465 | wifi { |
| 466 | wifi_reg_on_h: wifi-reg-on-h { |
| 467 | rockchip,pins = |
| 468 | <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 469 | }; |
| 470 | |
| 471 | wifi_host_wake_l: wifi-host-wake-l { |
| 472 | rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 473 | }; |
| 474 | }; |
| 475 | }; |
| 476 | |
| 477 | &pwm2 { |
| 478 | status = "okay"; |
| 479 | }; |
| 480 | |
| 481 | &saradc { |
| 482 | status = "okay"; |
| 483 | |
| 484 | vref-supply = <&vcc_1v8>; |
| 485 | }; |
| 486 | |
| 487 | &sdio0 { |
| 488 | #address-cells = <1>; |
| 489 | #size-cells = <0>; |
| 490 | bus-width = <4>; |
| 491 | clock-frequency = <50000000>; |
| 492 | cap-sdio-irq; |
| 493 | cap-sd-highspeed; |
| 494 | keep-power-in-suspend; |
| 495 | mmc-pwrseq = <&sdio_pwrseq>; |
| 496 | non-removable; |
| 497 | pinctrl-names = "default"; |
| 498 | pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; |
| 499 | sd-uhs-sdr104; |
| 500 | status = "okay"; |
| 501 | |
| 502 | brcmf: wifi@1 { |
| 503 | compatible = "brcm,bcm4329-fmac"; |
| 504 | reg = <1>; |
| 505 | interrupt-parent = <&gpio0>; |
| 506 | interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; |
| 507 | interrupt-names = "host-wake"; |
| 508 | pinctrl-names = "default"; |
| 509 | pinctrl-0 = <&wifi_host_wake_l>; |
| 510 | }; |
| 511 | }; |
| 512 | |
Jagan Teki | 167efc2 | 2020-04-28 15:30:17 +0530 | [diff] [blame] | 513 | &sdhci { |
| 514 | bus-width = <8>; |
| 515 | mmc-hs400-1_8v; |
| 516 | mmc-hs400-enhanced-strobe; |
| 517 | non-removable; |
| 518 | status = "okay"; |
| 519 | }; |
| 520 | |
Andy Yan | a4bbc66 | 2019-09-22 18:06:56 +0800 | [diff] [blame] | 521 | &sdmmc { |
| 522 | bus-width = <4>; |
| 523 | cap-mmc-highspeed; |
| 524 | cap-sd-highspeed; |
| 525 | cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; |
| 526 | disable-wp; |
| 527 | max-frequency = <150000000>; |
| 528 | pinctrl-names = "default"; |
| 529 | pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>; |
| 530 | status = "okay"; |
| 531 | }; |
| 532 | |
Andy Yan | a4bbc66 | 2019-09-22 18:06:56 +0800 | [diff] [blame] | 533 | &tcphy0 { |
| 534 | status = "okay"; |
| 535 | }; |
| 536 | |
| 537 | &tcphy1 { |
| 538 | status = "okay"; |
| 539 | }; |
| 540 | |
| 541 | &tsadc { |
| 542 | status = "okay"; |
| 543 | |
| 544 | /* tshut mode 0:CRU 1:GPIO */ |
| 545 | rockchip,hw-tshut-mode = <1>; |
| 546 | /* tshut polarity 0:LOW 1:HIGH */ |
| 547 | rockchip,hw-tshut-polarity = <1>; |
| 548 | }; |
| 549 | |
| 550 | &u2phy0 { |
| 551 | status = "okay"; |
| 552 | |
| 553 | u2phy0_otg: otg-port { |
| 554 | status = "okay"; |
| 555 | }; |
| 556 | |
| 557 | u2phy0_host: host-port { |
| 558 | phy-supply = <&vcc5v0_host0>; |
| 559 | status = "okay"; |
| 560 | }; |
| 561 | }; |
| 562 | |
| 563 | &u2phy1 { |
| 564 | status = "okay"; |
| 565 | |
| 566 | u2phy1_otg: otg-port { |
| 567 | status = "okay"; |
| 568 | }; |
| 569 | |
| 570 | u2phy1_host: host-port { |
| 571 | phy-supply = <&vcc5v0_host1>; |
| 572 | status = "okay"; |
| 573 | }; |
| 574 | }; |
| 575 | |
| 576 | &uart0 { |
| 577 | pinctrl-names = "default"; |
| 578 | pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; |
| 579 | status = "okay"; |
| 580 | |
| 581 | bluetooth { |
| 582 | compatible = "brcm,bcm43438-bt"; |
| 583 | clocks = <&rk808 1>; |
| 584 | clock-names = "ext_clock"; |
| 585 | device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; |
| 586 | host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; |
| 587 | shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; |
| 588 | pinctrl-names = "default"; |
| 589 | pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; |
| 590 | }; |
| 591 | }; |
| 592 | |
| 593 | &uart2 { |
| 594 | status = "okay"; |
| 595 | }; |
| 596 | |
| 597 | &usb_host0_ehci { |
| 598 | status = "okay"; |
| 599 | }; |
| 600 | |
| 601 | &usb_host0_ohci { |
| 602 | status = "okay"; |
| 603 | }; |
| 604 | |
| 605 | &usb_host1_ehci { |
| 606 | status = "okay"; |
| 607 | }; |
| 608 | |
| 609 | &usb_host1_ohci { |
| 610 | status = "okay"; |
| 611 | }; |
| 612 | |
| 613 | &usbdrd3_0 { |
| 614 | status = "okay"; |
| 615 | }; |
| 616 | |
| 617 | &usbdrd_dwc3_0 { |
| 618 | status = "okay"; |
| 619 | dr_mode = "otg"; |
| 620 | }; |
| 621 | |
| 622 | &usbdrd3_1 { |
| 623 | status = "okay"; |
| 624 | }; |
| 625 | |
| 626 | &usbdrd_dwc3_1 { |
| 627 | status = "okay"; |
| 628 | dr_mode = "host"; |
| 629 | }; |
| 630 | |
| 631 | &vopb { |
| 632 | status = "okay"; |
| 633 | }; |
| 634 | |
| 635 | &vopb_mmu { |
| 636 | status = "okay"; |
| 637 | }; |
| 638 | |
| 639 | &vopl { |
| 640 | status = "okay"; |
| 641 | }; |
| 642 | |
| 643 | &vopl_mmu { |
| 644 | status = "okay"; |
| 645 | }; |