blob: 904e1bdc681fb1b99fccc2f06270c2a9973609a3 [file] [log] [blame]
Wenyou Yang9319a752017-03-23 12:44:37 +08001/*
2 * Atmel PIO pinctrl driver
3 *
4 * Copyright (C) 2016 Atmel Corporation
5 * Wenyou.Yang <wenyou.yang@atmel.com>
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10#include <common.h>
11#include <dm/device.h>
12#include <dm/pinctrl.h>
13#include <linux/io.h>
14#include <linux/err.h>
15#include <mach/at91_pio.h>
16
17DECLARE_GLOBAL_DATA_PTR;
18
19#define MAX_GPIO_BANKS 5
20#define MAX_NB_GPIO_PER_BANK 32
21
22#define MAX_PINMUX_ENTRIES 200
23
24struct at91_pinctrl_priv {
25 struct at91_port *reg_base[MAX_GPIO_BANKS];
26 u32 nbanks;
27};
28
29#define PULL_UP BIT(0)
30#define MULTI_DRIVE BIT(1)
31#define DEGLITCH BIT(2)
32#define PULL_DOWN BIT(3)
33#define DIS_SCHMIT BIT(4)
34#define DRIVE_STRENGTH_SHIFT 5
35#define DRIVE_STRENGTH_MASK 0x3
36#define DRIVE_STRENGTH (DRIVE_STRENGTH_MASK << DRIVE_STRENGTH_SHIFT)
37#define OUTPUT BIT(7)
38#define OUTPUT_VAL_SHIFT 8
39#define OUTPUT_VAL (0x1 << OUTPUT_VAL_SHIFT)
40#define DEBOUNCE BIT(16)
41#define DEBOUNCE_VAL_SHIFT 17
42#define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT)
43
44/**
45 * These defines will translated the dt binding settings to our internal
46 * settings. They are not necessarily the same value as the register setting.
47 * The actual drive strength current of low, medium and high must be looked up
48 * from the corresponding device datasheet. This value is different for pins
49 * that are even in the same banks. It is also dependent on VCC.
50 * DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive
51 * strength when there is no dt config for it.
52 */
53#define DRIVE_STRENGTH_DEFAULT (0 << DRIVE_STRENGTH_SHIFT)
54#define DRIVE_STRENGTH_LOW (1 << DRIVE_STRENGTH_SHIFT)
55#define DRIVE_STRENGTH_MED (2 << DRIVE_STRENGTH_SHIFT)
56#define DRIVE_STRENGTH_HI (3 << DRIVE_STRENGTH_SHIFT)
57
58enum at91_mux {
59 AT91_MUX_GPIO = 0,
60 AT91_MUX_PERIPH_A = 1,
61 AT91_MUX_PERIPH_B = 2,
62 AT91_MUX_PERIPH_C = 3,
63 AT91_MUX_PERIPH_D = 4,
64};
65
66/**
67 * struct at91_pinctrl_mux_ops - describes an AT91 mux ops group
68 * on new IP with support for periph C and D the way to mux in
69 * periph A and B has changed
70 * So provide the right callbacks
71 * if not present means the IP does not support it
72 * @mux_A_periph: assign the corresponding pin to the peripheral A function.
73 * @mux_B_periph: assign the corresponding pin to the peripheral B function.
74 * @mux_C_periph: assign the corresponding pin to the peripheral C function.
75 * @mux_D_periph: assign the corresponding pin to the peripheral D function.
76 * @set_deglitch: enable/disable the deglitch feature.
77 * @set_debounce: enable/disable the debounce feature.
78 * @set_pulldown: enable/disable the pulldown feature.
79 * @disable_schmitt_trig: disable schmitt trigger
80 */
81struct at91_pinctrl_mux_ops {
82 void (*mux_A_periph)(struct at91_port *pio, u32 mask);
83 void (*mux_B_periph)(struct at91_port *pio, u32 mask);
84 void (*mux_C_periph)(struct at91_port *pio, u32 mask);
85 void (*mux_D_periph)(struct at91_port *pio, u32 mask);
86 void (*set_deglitch)(struct at91_port *pio, u32 mask, bool is_on);
87 void (*set_debounce)(struct at91_port *pio, u32 mask, bool is_on,
88 u32 div);
89 void (*set_pulldown)(struct at91_port *pio, u32 mask, bool is_on);
90 void (*disable_schmitt_trig)(struct at91_port *pio, u32 mask);
91 void (*set_drivestrength)(struct at91_port *pio, u32 pin,
92 u32 strength);
93};
94
95static u32 two_bit_pin_value_shift_amount(u32 pin)
96{
97 /* return the shift value for a pin for "two bit" per pin registers,
98 * i.e. drive strength */
99 return 2 * ((pin >= MAX_NB_GPIO_PER_BANK/2)
100 ? pin - MAX_NB_GPIO_PER_BANK/2 : pin);
101}
102
103static void at91_mux_disable_interrupt(struct at91_port *pio, u32 mask)
104{
105 writel(mask, &pio->idr);
106}
107
108static void at91_mux_set_pullup(struct at91_port *pio, u32 mask, bool on)
109{
110 if (on)
111 writel(mask, &pio->mux.pio3.ppddr);
112
113 writel(mask, (on ? &pio->puer : &pio->pudr));
114}
115
116static void at91_mux_set_output(struct at91_port *pio, unsigned mask,
117 bool is_on, bool val)
118{
119 writel(mask, (val ? &pio->sodr : &pio->codr));
120 writel(mask, (is_on ? &pio->oer : &pio->odr));
121}
122
123static void at91_mux_set_multidrive(struct at91_port *pio, u32 mask, bool on)
124{
125 writel(mask, (on ? &pio->mder : &pio->mddr));
126}
127
128static void at91_mux_set_A_periph(struct at91_port *pio, u32 mask)
129{
130 writel(mask, &pio->mux.pio2.asr);
131}
132
133static void at91_mux_set_B_periph(struct at91_port *pio, u32 mask)
134{
135 writel(mask, &pio->mux.pio2.bsr);
136}
137
138static void at91_mux_pio3_set_A_periph(struct at91_port *pio, u32 mask)
139{
140 writel(readl(&pio->mux.pio3.abcdsr1) & ~mask, &pio->mux.pio3.abcdsr1);
141 writel(readl(&pio->mux.pio3.abcdsr2) & ~mask, &pio->mux.pio3.abcdsr2);
142}
143
144static void at91_mux_pio3_set_B_periph(struct at91_port *pio, u32 mask)
145{
146 writel(readl(&pio->mux.pio3.abcdsr1) | mask, &pio->mux.pio3.abcdsr1);
147 writel(readl(&pio->mux.pio3.abcdsr2) & ~mask, &pio->mux.pio3.abcdsr2);
148}
149
150static void at91_mux_pio3_set_C_periph(struct at91_port *pio, u32 mask)
151{
152 writel(readl(&pio->mux.pio3.abcdsr1) & ~mask, &pio->mux.pio3.abcdsr1);
153 writel(readl(&pio->mux.pio3.abcdsr2) | mask, &pio->mux.pio3.abcdsr2);
154}
155
156static void at91_mux_pio3_set_D_periph(struct at91_port *pio, u32 mask)
157{
158 writel(readl(&pio->mux.pio3.abcdsr1) | mask, &pio->mux.pio3.abcdsr1);
159 writel(readl(&pio->mux.pio3.abcdsr2) | mask, &pio->mux.pio3.abcdsr2);
160}
161
162static void at91_mux_set_deglitch(struct at91_port *pio, u32 mask, bool is_on)
163{
164 writel(mask, (is_on ? &pio->ifer : &pio->ifdr));
165}
166
167static void at91_mux_pio3_set_deglitch(struct at91_port *pio,
168 u32 mask, bool is_on)
169{
170 if (is_on)
171 writel(mask, &pio->mux.pio3.ifscdr);
172 at91_mux_set_deglitch(pio, mask, is_on);
173}
174
175static void at91_mux_pio3_set_debounce(struct at91_port *pio, u32 mask,
176 bool is_on, u32 div)
177{
178 if (is_on) {
179 writel(mask, &pio->mux.pio3.ifscer);
180 writel(div & PIO_SCDR_DIV, &pio->mux.pio3.scdr);
181 writel(mask, &pio->ifer);
182 } else {
183 writel(mask, &pio->mux.pio3.ifscdr);
184 }
185}
186
187static void at91_mux_pio3_set_pulldown(struct at91_port *pio,
188 u32 mask, bool is_on)
189{
190 if (is_on)
191 writel(mask, &pio->pudr);
192
193 writel(mask, (is_on ? &pio->mux.pio3.ppder : &pio->mux.pio3.ppddr));
194}
195
196static void at91_mux_pio3_disable_schmitt_trig(struct at91_port *pio,
197 u32 mask)
198{
199 writel(readl(&pio->schmitt) | mask, &pio->schmitt);
200}
201
202static void set_drive_strength(void *reg, u32 pin, u32 strength)
203{
204 u32 shift = two_bit_pin_value_shift_amount(pin);
205
206 clrsetbits_le32(reg, DRIVE_STRENGTH_MASK << shift, strength << shift);
207}
208
209static void at91_mux_sama5d3_set_drivestrength(struct at91_port *pio,
210 u32 pin, u32 setting)
211{
212 void *reg;
213
214 reg = &pio->driver12;
215 if (pin >= MAX_NB_GPIO_PER_BANK / 2)
216 reg = &pio->driver2;
217
218 /* do nothing if setting is zero */
219 if (!setting)
220 return;
221
222 /* strength is 1 to 1 with setting for SAMA5 */
223 set_drive_strength(reg, pin, setting);
224}
225
226static void at91_mux_sam9x5_set_drivestrength(struct at91_port *pio,
227 u32 pin, u32 setting)
228{
229 void *reg;
230
231 reg = &pio->driver1;
232 if (pin >= MAX_NB_GPIO_PER_BANK / 2)
233 reg = &pio->driver12;
234
235 /* do nothing if setting is zero */
236 if (!setting)
237 return;
238
239 /* strength is inverse on SAM9x5s with our defines
240 * 0 = hi, 1 = med, 2 = low, 3 = rsvd */
241 setting = DRIVE_STRENGTH_HI - setting;
242
243 set_drive_strength(reg, pin, setting);
244}
245
246static struct at91_pinctrl_mux_ops at91rm9200_ops = {
247 .mux_A_periph = at91_mux_set_A_periph,
248 .mux_B_periph = at91_mux_set_B_periph,
249 .set_deglitch = at91_mux_set_deglitch,
250};
251
252static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
253 .mux_A_periph = at91_mux_pio3_set_A_periph,
254 .mux_B_periph = at91_mux_pio3_set_B_periph,
255 .mux_C_periph = at91_mux_pio3_set_C_periph,
256 .mux_D_periph = at91_mux_pio3_set_D_periph,
257 .set_deglitch = at91_mux_pio3_set_deglitch,
258 .set_debounce = at91_mux_pio3_set_debounce,
259 .set_pulldown = at91_mux_pio3_set_pulldown,
260 .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
261 .set_drivestrength = at91_mux_sam9x5_set_drivestrength,
262};
263
264static struct at91_pinctrl_mux_ops sama5d3_ops = {
265 .mux_A_periph = at91_mux_pio3_set_A_periph,
266 .mux_B_periph = at91_mux_pio3_set_B_periph,
267 .mux_C_periph = at91_mux_pio3_set_C_periph,
268 .mux_D_periph = at91_mux_pio3_set_D_periph,
269 .set_deglitch = at91_mux_pio3_set_deglitch,
270 .set_debounce = at91_mux_pio3_set_debounce,
271 .set_pulldown = at91_mux_pio3_set_pulldown,
272 .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
273 .set_drivestrength = at91_mux_sama5d3_set_drivestrength,
274};
275
276static void at91_mux_gpio_disable(struct at91_port *pio, u32 mask)
277{
278 writel(mask, &pio->pdr);
279}
280
281static void at91_mux_gpio_enable(struct at91_port *pio, u32 mask, bool input)
282{
283 writel(mask, &pio->per);
284 writel(mask, (input ? &pio->odr : &pio->oer));
285}
286
287static int at91_pmx_set(struct at91_pinctrl_mux_ops *ops,
288 struct at91_port *pio, u32 mask, enum at91_mux mux)
289{
290 at91_mux_disable_interrupt(pio, mask);
291 switch (mux) {
292 case AT91_MUX_GPIO:
293 at91_mux_gpio_enable(pio, mask, 1);
294 break;
295 case AT91_MUX_PERIPH_A:
296 ops->mux_A_periph(pio, mask);
297 break;
298 case AT91_MUX_PERIPH_B:
299 ops->mux_B_periph(pio, mask);
300 break;
301 case AT91_MUX_PERIPH_C:
302 if (!ops->mux_C_periph)
303 return -EINVAL;
304 ops->mux_C_periph(pio, mask);
305 break;
306 case AT91_MUX_PERIPH_D:
307 if (!ops->mux_D_periph)
308 return -EINVAL;
309 ops->mux_D_periph(pio, mask);
310 break;
311 }
312 if (mux)
313 at91_mux_gpio_disable(pio, mask);
314
315 return 0;
316}
317
318static int at91_pinconf_set(struct at91_pinctrl_mux_ops *ops,
319 struct at91_port *pio, u32 pin, u32 config)
320{
321 u32 mask = BIT(pin);
322
323 if ((config & PULL_UP) && (config & PULL_DOWN))
324 return -EINVAL;
325
326 at91_mux_set_output(pio, mask, config & OUTPUT,
327 (config & OUTPUT_VAL) >> OUTPUT_VAL_SHIFT);
328 at91_mux_set_pullup(pio, mask, config & PULL_UP);
329 at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE);
330 if (ops->set_deglitch)
331 ops->set_deglitch(pio, mask, config & DEGLITCH);
332 if (ops->set_debounce)
333 ops->set_debounce(pio, mask, config & DEBOUNCE,
334 (config & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT);
335 if (ops->set_pulldown)
336 ops->set_pulldown(pio, mask, config & PULL_DOWN);
337 if (ops->disable_schmitt_trig && config & DIS_SCHMIT)
338 ops->disable_schmitt_trig(pio, mask);
339 if (ops->set_drivestrength)
340 ops->set_drivestrength(pio, pin,
341 (config & DRIVE_STRENGTH) >> DRIVE_STRENGTH_SHIFT);
342
343 return 0;
344}
345
346static int at91_pin_check_config(struct udevice *dev, u32 bank, u32 pin)
347{
348 struct at91_pinctrl_priv *priv = dev_get_priv(dev);
349
350 if (bank >= priv->nbanks) {
351 debug("pin conf bank %d >= nbanks %d\n", bank, priv->nbanks);
352 return -EINVAL;
353 }
354
355 if (pin >= MAX_NB_GPIO_PER_BANK) {
356 debug("pin conf pin %d >= %d\n", pin, MAX_NB_GPIO_PER_BANK);
357 return -EINVAL;
358 }
359
360 return 0;
361}
362
363static int at91_pinctrl_set_state(struct udevice *dev, struct udevice *config)
364{
365 struct at91_pinctrl_priv *priv = dev_get_priv(dev);
366 const void *blob = gd->fdt_blob;
367 int node = config->of_offset;
368 u32 cells[MAX_PINMUX_ENTRIES];
369 const u32 *list = cells;
370 u32 bank, pin;
371 u32 conf, mask, count, i;
372 int size;
373 int ret;
374 enum at91_mux mux;
375 struct at91_port *pio;
376 struct at91_pinctrl_mux_ops *ops =
377 (struct at91_pinctrl_mux_ops *)dev_get_driver_data(dev);
378
379 /*
380 * the binding format is atmel,pins = <bank pin mux CONFIG ...>,
381 * do sanity check and calculate pins number
382 */
383 size = fdtdec_get_int_array_count(blob, node, "atmel,pins",
384 cells, ARRAY_SIZE(cells));
385
386 /* we do not check return since it's safe node passed down */
387 count = size >> 2;
388 if (!count)
389 return -EINVAL;
390
391 for (i = 0; i < count; i++) {
392 bank = *list++;
393 pin = *list++;
394 mux = *list++;
395 conf = *list++;
396
397 ret = at91_pin_check_config(dev, bank, pin);
398 if (ret)
399 return ret;
400
401 pio = priv->reg_base[bank];
402 mask = BIT(pin);
403
404 ret = at91_pmx_set(ops, pio, mask, mux);
405 if (ret)
406 return ret;
407
408 ret = at91_pinconf_set(ops, pio, pin, conf);
409 if (ret)
410 return ret;
411 }
412
413 return 0;
414}
415
416const struct pinctrl_ops at91_pinctrl_ops = {
417 .set_state = at91_pinctrl_set_state,
418};
419
420static int at91_pinctrl_probe(struct udevice *dev)
421{
422 struct at91_pinctrl_priv *priv = dev_get_priv(dev);
423 fdt_addr_t addr_base;
424 int index;
425
426 for (index = 0; index < MAX_GPIO_BANKS; index++) {
427 addr_base = dev_get_addr_index(dev, index);
428 if (addr_base == FDT_ADDR_T_NONE)
429 break;
430
431 priv->reg_base[index] = (struct at91_port *)addr_base;
432 }
433
434 priv->nbanks = index;
435
436 return 0;
437}
438
439static const struct udevice_id at91_pinctrl_match[] = {
440 { .compatible = "atmel,sama5d3-pinctrl", .data = (ulong)&sama5d3_ops },
441 { .compatible = "atmel,at91sam9x5-pinctrl", .data = (ulong)&at91sam9x5_ops },
442 { .compatible = "atmel,at91rm9200-pinctrl", .data = (ulong)&at91rm9200_ops },
443 {}
444};
445
446U_BOOT_DRIVER(at91_pinctrl) = {
447 .name = "pinctrl_at91",
448 .id = UCLASS_PINCTRL,
449 .of_match = at91_pinctrl_match,
450 .probe = at91_pinctrl_probe,
451 .priv_auto_alloc_size = sizeof(struct at91_pinctrl_priv),
452 .ops = &at91_pinctrl_ops,
453};