blob: bc479f6e08e11c2a881effc67b55454592d07827 [file] [log] [blame]
Chunhe Lan57072332013-06-14 16:21:48 +08001/*
2 * Copyright 2013 Freescale Semiconductor, Inc.
3 *
4 * Authors: Roy Zang <tie-fei.zang@freescale.com>
5 * Chunhe Lan <Chunhe.Lan@freescale.com>
6 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02007 * SPDX-License-Identifier: GPL-2.0+
Chunhe Lan57072332013-06-14 16:21:48 +08008 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
Chunhe Lanfb735722014-11-07 15:15:49 +080013#define CONFIG_DISPLAY_BOARDINFO
14
Chunhe Lan57072332013-06-14 16:21:48 +080015#ifndef CONFIG_SYS_TEXT_BASE
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +053016#define CONFIG_SYS_TEXT_BASE 0xeff40000
Chunhe Lan57072332013-06-14 16:21:48 +080017#endif
18
19#ifndef CONFIG_SYS_MONITOR_BASE
20#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
21#endif
22
23#ifndef CONFIG_RESET_VECTOR_ADDRESS
24#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
25#endif
26
27/* High Level Configuration Options */
28#define CONFIG_BOOKE /* BOOKE */
29#define CONFIG_E500 /* BOOKE e500 family */
Chunhe Lan57072332013-06-14 16:21:48 +080030#define CONFIG_P1023
31#define CONFIG_MP /* support multiple processors */
32
33#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
34#define CONFIG_PCI /* Enable PCI/PCIE */
35#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
36#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
37#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
38#define CONFIG_PCIE3 /* PCIE controler 3 (slot 3) */
39#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
40#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
41#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
42#define CONFIG_FSL_LAW /* Use common FSL init code */
43
44#ifndef __ASSEMBLY__
45extern unsigned long get_clock_freq(void);
46#endif
47
48#define CONFIG_SYS_CLK_FREQ 66666666
49#define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ
50
51/*
52 * These can be toggled for performance analysis, otherwise use default.
53 */
54#define CONFIG_L2_CACHE /* toggle L2 cache */
55#define CONFIG_BTB /* toggle branch predition */
56#define CONFIG_HWCONFIG
57
58#define CONFIG_ENABLE_36BIT_PHYS
59
60#define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */
61#define CONFIG_SYS_MEMTEST_END 0x02000000
62
63#define CONFIG_PANIC_HANG /* do not reset board on panic */
64
65/* Implement conversion of addresses in the LBC */
66#define CONFIG_SYS_LBC_LBCR 0x00000000
67#define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8
68
69/* DDR Setup */
70#define CONFIG_VERY_BIG_RAM
71#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
72#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
73
74#define CONFIG_DIMM_SLOTS_PER_CTLR 1
75#define CONFIG_CHIP_SELECTS_PER_CTRL 1
76
77#define CONFIG_DDR_SPD
York Sun5614e712013-09-30 09:22:09 -070078#define CONFIG_SYS_FSL_DDR3
Chunhe Lan57072332013-06-14 16:21:48 +080079#define CONFIG_FSL_DDR_INTERACTIVE
80#define CONFIG_SYS_SDRAM_SIZE 512u /* DDR is 512M */
81#define CONFIG_SYS_SPD_BUS_NUM 0
82#define SPD_EEPROM_ADDRESS 0x50
83#define CONFIG_SYS_DDR_RAW_TIMING
84
85/*
86 * Memory map
87 *
88 * 0x0000_0000 0x1fff_ffff DDR 512M cacheable
89 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable
90 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable
91 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable
92 * 0xff00_0000 0xff3f_ffff DPAA_QBMAN 4M cacheable
93 * 0xff60_0000 0xff7f_ffff CCSR 2M non-cacheable
94 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable TLB0
95 *
96 * Localbus non-cacheable
97 *
98 * 0xec00_0000 0xefff_ffff NOR flash 64M non-cacheable
99 * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable
100 */
101
102/*
103 * Local Bus Definitions
104 */
105#define CONFIG_SYS_FLASH_BASE 0xec000000 /* start of FLASH 64M */
106#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
107
108#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
109 | BR_PS_16 | BR_V)
110#define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
111
112#define CONFIG_FLASH_CFI_DRIVER
113#define CONFIG_SYS_FLASH_CFI
114#define CONFIG_SYS_FLASH_EMPTY_INFO
115#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
116#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
117#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
118#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
119
120#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f function */
121#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
122
123#define CONFIG_SYS_INIT_RAM_LOCK
124#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
125#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000/* Size of used area in RAM */
126#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
127 GENERATED_GBL_DATA_SIZE)
128#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
129
Prabhakar Kushwaha9307cba2014-03-31 15:31:48 +0530130#define CONFIG_SYS_MONITOR_LEN (768 * 1024) /* Reserve 512 kB for Mon */
Chunhe Lan57072332013-06-14 16:21:48 +0800131#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */
132
133#define CONFIG_SYS_NAND_BASE 0xffa00000
134#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
135
136#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
137#define CONFIG_SYS_MAX_NAND_DEVICE 1
Chunhe Lan57072332013-06-14 16:21:48 +0800138#define CONFIG_CMD_NAND
139#define CONFIG_NAND_FSL_ELBC
140#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
141
142/* NAND flash config */
143#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
144 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
145 | BR_PS_8 /* Port Size = 8bit */ \
146 | BR_MS_FCM /* MSEL = FCM */ \
147 | BR_V) /* valid */
148#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB /* length 256K */ \
149 | OR_FCM_PGS \
150 | OR_FCM_CSCT \
151 | OR_FCM_CST \
152 | OR_FCM_CHT \
153 | OR_FCM_SCY_1 \
154 | OR_FCM_TRLX \
155 | OR_FCM_EHTR)
156
157#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
158#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
159#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
160#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
161
162/* Serial Port */
163#define CONFIG_CONS_INDEX 1
164#undef CONFIG_SERIAL_SOFTWARE_FIFO
Chunhe Lan57072332013-06-14 16:21:48 +0800165#define CONFIG_SYS_NS16550_SERIAL
166#define CONFIG_SYS_NS16550_REG_SIZE 1
167#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
168
169#define CONFIG_SYS_BAUDRATE_TABLE \
170 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
171
172#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
173#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
174
175/* Use the HUSH parser */
176#define CONFIG_SYS_HUSH_PARSER
177
178/*
179 * Pass open firmware flat tree
180 */
181#define CONFIG_OF_LIBFDT
182#define CONFIG_OF_BOARD_SETUP
183#define CONFIG_OF_STDOUT_VIA_ALIAS
184
185/* new uImage format support */
186#define CONFIG_FIT
187#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
188
189/* I2C */
Heiko Schocher00f792e2012-10-24 13:48:22 +0200190#define CONFIG_SYS_I2C
191#define CONFIG_SYS_I2C_FSL
192#define CONFIG_SYS_FSL_I2C_SPEED 400000
193#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
194#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
195#define CONFIG_SYS_FSL_I2C2_SPEED 400000
196#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
197#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
Chunhe Lan57072332013-06-14 16:21:48 +0800198
199/*
200 * I2C2 EEPROM
201 */
202#define CONFIG_ID_EEPROM
203#ifdef CONFIG_ID_EEPROM
204#define CONFIG_SYS_I2C_EEPROM_NXID
205#endif
206#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
207#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
208#define CONFIG_SYS_EEPROM_BUS_NUM 0
209
210#define CONFIG_CMD_I2C
211
212/*
213 * General PCI
214 * Memory space is mapped 1-1, but I/O space must start from 0.
215 */
216
217/* controller 3, Slot 1, tgtid 3, Base address b000 */
218#define CONFIG_SYS_PCIE3_NAME "Slot 3"
219#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000
220#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000
221#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000
222#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
223#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000
224#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
225#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000
226#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
227
228/* controller 2, direct to uli, tgtid 2, Base address 9000 */
229#define CONFIG_SYS_PCIE2_NAME "Slot 2"
230#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
231#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
232#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
233#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
234#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
235#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
236#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
237#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
238
239/* controller 1, Slot 2, tgtid 1, Base address a000 */
240#define CONFIG_SYS_PCIE1_NAME "Slot 1"
241#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000
242#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000
243#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000
244#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
245#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000
246#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
247#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000
248#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
249
250#if defined(CONFIG_PCI)
Chunhe Lan57072332013-06-14 16:21:48 +0800251#define CONFIG_PCI_PNP /* do pci plug-and-play */
252#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
253#endif /* CONFIG_PCI */
254
255/*
256 * Environment
257 */
258#define CONFIG_ENV_OVERWRITE
259
260#define CONFIG_ENV_IS_IN_FLASH
Chunhe Lan57072332013-06-14 16:21:48 +0800261#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
Chunhe Lan57072332013-06-14 16:21:48 +0800262#define CONFIG_ENV_SIZE 0x2000
263#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
264
265#define CONFIG_LOADS_ECHO /* echo on for serial download */
266#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
267
268/*
269 * Command line configuration.
270 */
Chunhe Lan57072332013-06-14 16:21:48 +0800271#define CONFIG_CMD_IRQ
272#define CONFIG_CMD_PING
273#define CONFIG_CMD_MII
Chunhe Lan57072332013-06-14 16:21:48 +0800274#define CONFIG_CMD_REGINFO
275
276#if defined(CONFIG_PCI)
277#define CONFIG_CMD_PCI
Chunhe Lan57072332013-06-14 16:21:48 +0800278#endif
279
280/*
281 * USB
282 */
283#define CONFIG_HAS_FSL_DR_USB
284#ifdef CONFIG_HAS_FSL_DR_USB
285#define CONFIG_USB_EHCI
286
287#ifdef CONFIG_USB_EHCI
288#define CONFIG_CMD_USB
289#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
290#define CONFIG_USB_EHCI_FSL
291#define CONFIG_USB_STORAGE
292#define CONFIG_CMD_FAT
293#define CONFIG_CMD_EXT2
294#define CONFIG_CMD_FAT
295#define CONFIG_DOS_PARTITION
296#endif
297#endif
298
299/*
300 * Miscellaneous configurable options
301 */
302#define CONFIG_SYS_LONGHELP /* undef to save memory */
303#define CONFIG_CMDLINE_EDITING /* Command-line editing */
304#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
Chunhe Lan57072332013-06-14 16:21:48 +0800305#if defined(CONFIG_CMD_KGDB)
306#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
307#else
308#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
309#endif
310/* Print Buffer Size */
311#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
312#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
313/* Boot Argument Buffer Size */
314#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
Chunhe Lan57072332013-06-14 16:21:48 +0800315
316/*
317 * For booting Linux, the board info and command line data
318 * have to be in the first 64 MB of memory, since this is
319 * the maximum mapped by the Linux kernel during initialization.
320 */
321#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
322#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
323
324/*
325 * Environment Configuration
326 */
327#define CONFIG_BOOTFILE "uImage"
328#define CONFIG_UBOOTPATH (u-boot.bin) /* U-Boot image on TFTP server */
329
330/* default location for tftp and bootm */
331#define CONFIG_LOADADDR 1000000
332
333#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
334
335#define CONFIG_BAUDRATE 115200
336
337/* Qman/Bman */
338#define CONFIG_SYS_DPAA_QBMAN /* support Q/Bman */
339#define CONFIG_SYS_QMAN_MEM_BASE 0xff000000
340#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
341#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
Jeffrey Ladouceur3fa66db2014-12-08 14:54:01 -0500342#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
343#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
344#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
345#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
346#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
347 CONFIG_SYS_QMAN_CENA_SIZE)
348#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
349#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
Chunhe Lan57072332013-06-14 16:21:48 +0800350#define CONFIG_SYS_BMAN_MEM_BASE 0xff200000
351#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
352#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
Jeffrey Ladouceur3fa66db2014-12-08 14:54:01 -0500353#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
354#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
355#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
356#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
357#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
358 CONFIG_SYS_BMAN_CENA_SIZE)
359#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
360#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
Chunhe Lan57072332013-06-14 16:21:48 +0800361
362/* For FM */
363#define CONFIG_SYS_DPAA_FMAN
364#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
365
366#ifdef CONFIG_SYS_DPAA_FMAN
367#define CONFIG_FMAN_ENET
368#define CONFIG_PHY_ATHEROS
369#endif
370
371/* Default address of microcode for the Linux Fman driver */
372/* QE microcode/firmware address */
373#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
Zhao Qiangdcf1d772014-03-21 16:21:44 +0800374#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
Chunhe Lan57072332013-06-14 16:21:48 +0800375#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
376#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
377
378#ifdef CONFIG_FMAN_ENET
379#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1
380#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x2
381
382#define CONFIG_SYS_TBIPA_VALUE 8
383#define CONFIG_MII /* MII PHY management */
384#define CONFIG_ETHPRIME "FM1@DTSEC1"
385#endif
386
387#define CONFIG_EXTRA_ENV_SETTINGS \
Chunhe Lan5eabbae2014-10-17 16:24:06 +0800388 "netdev=eth0\0" \
389 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
390 "loadaddr=1000000\0" \
391 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
392 "tftpflash=tftpboot $loadaddr $uboot; " \
393 "protect off $ubootaddr +$filesize; " \
394 "erase $ubootaddr +$filesize; " \
395 "cp.b $loadaddr $ubootaddr $filesize; " \
396 "protect on $ubootaddr +$filesize; " \
397 "cmp.b $loadaddr $ubootaddr $filesize\0" \
398 "consoledev=ttyS0\0" \
399 "ramdiskaddr=2000000\0" \
400 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
401 "fdtaddr=c00000\0" \
402 "fdtfile=p1023rdb.dtb\0" \
403 "othbootargs=ramdisk_size=600000\0" \
404 "bdev=sda1\0" \
Chunhe Lan57072332013-06-14 16:21:48 +0800405 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
406
Chunhe Lan5eabbae2014-10-17 16:24:06 +0800407#define CONFIG_HDBOOT \
408 "setenv bootargs root=/dev/$bdev rw " \
409 "console=$consoledev,$baudrate $othbootargs;" \
410 "tftp $loadaddr $bootfile;" \
411 "tftp $fdtaddr $fdtfile;" \
412 "bootm $loadaddr - $fdtaddr"
413
414#define CONFIG_NFSBOOTCOMMAND \
415 "setenv bootargs root=/dev/nfs rw " \
416 "nfsroot=$serverip:$rootpath " \
417 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
418 "console=$consoledev,$baudrate $othbootargs;" \
419 "tftp $loadaddr $bootfile;" \
420 "tftp $fdtaddr $fdtfile;" \
421 "bootm $loadaddr - $fdtaddr"
422
423#define CONFIG_RAMBOOTCOMMAND \
424 "setenv bootargs root=/dev/ram rw " \
425 "console=$consoledev,$baudrate $othbootargs;" \
426 "tftp $ramdiskaddr $ramdiskfile;" \
427 "tftp $loadaddr $bootfile;" \
428 "tftp $fdtaddr $fdtfile;" \
429 "bootm $loadaddr $ramdiskaddr $fdtaddr"
430
431#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
432
Chunhe Lan57072332013-06-14 16:21:48 +0800433#endif /* __CONFIG_H */