Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 88f965d720b745431a1fbe9107c561b7f381026c / . / arch / arm / dts / am437x-sk-evm.dts
blob: 3f9d8080910d027394091d0fd00426bd86c11400 [file] [log] [blame]
Mugunthan V N7a837bc2015-09-28 16:17:52 +0530[diff] [blame]1/*
2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9/* AM437x SK EVM */
10
11/dts-v1/;
12
13#include "am4372.dtsi"
14#include <dt-bindings/pinctrl/am43xx.h>
15#include <dt-bindings/pwm/pwm.h>
16#include <dt-bindings/gpio/gpio.h>
17#include <dt-bindings/input/input.h>
18
19/ {
20 model = "TI AM437x SK EVM";
21 compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
22
23 aliases {
24 display0 = &lcd0;
25 };
26
27 chosen {
28 stdout-path = &uart0;
29 };
30
31 backlight {
32 compatible = "pwm-backlight";
33 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
34 brightness-levels = <0 51 53 56 62 75 101 152 255>;
35 default-brightness-level = <8>;
36 };
37
38 sound {
39 compatible = "ti,da830-evm-audio";
40 ti,model = "AM437x-SK-EVM";
41 ti,audio-codec = <&tlv320aic3106>;
42 ti,mcasp-controller = <&mcasp1>;
43 ti,codec-clock-rate = <24000000>;
44 ti,audio-routing =
45 "Headphone Jack", "HPLOUT",
46 "Headphone Jack", "HPROUT";
47 };
48
49 matrix_keypad: matrix_keypad@0 {
50 compatible = "gpio-matrix-keypad";
51
52 pinctrl-names = "default";
53 pinctrl-0 = <&matrix_keypad_pins>;
54
55 debounce-delay-ms = <5>;
56 col-scan-delay-us = <5>;
57
58 row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
59 &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
60
61 col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */
62 &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */
63
64 linux,keymap = <
65 MATRIX_KEY(0, 0, KEY_DOWN)
66 MATRIX_KEY(0, 1, KEY_RIGHT)
67 MATRIX_KEY(1, 0, KEY_LEFT)
68 MATRIX_KEY(1, 1, KEY_UP)
69 >;
70 };
71
72 leds {
73 compatible = "gpio-leds";
74
75 pinctrl-names = "default";
76 pinctrl-0 = <&leds_pins>;
77
78 led@0 {
79 label = "am437x-sk:red:heartbeat";
80 gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */
81 linux,default-trigger = "heartbeat";
82 default-state = "off";
83 };
84
85 led@1 {
86 label = "am437x-sk:green:mmc1";
87 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */
88 linux,default-trigger = "mmc0";
89 default-state = "off";
90 };
91
92 led@2 {
93 label = "am437x-sk:blue:cpu0";
94 gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */
95 linux,default-trigger = "cpu0";
96 default-state = "off";
97 };
98
99 led@3 {
100 label = "am437x-sk:blue:usr3";
101 gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */
102 default-state = "off";
103 };
104 };
105
106 lcd0: display {
107 compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
108 label = "lcd";
109
110 pinctrl-names = "default";
111 pinctrl-0 = <&lcd_pins>;
112
113 enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
114
115 panel-timing {
116 clock-frequency = <9000000>;
117 hactive = <480>;
118 vactive = <272>;
119 hfront-porch = <2>;
120 hback-porch = <2>;
121 hsync-len = <41>;
122 vfront-porch = <2>;
123 vback-porch = <2>;
124 vsync-len = <10>;
125 hsync-active = <0>;
126 vsync-active = <0>;
127 de-active = <1>;
128 pixelclk-active = <1>;
129 };
130
131 port {
132 lcd_in: endpoint {
133 remote-endpoint = <&dpi_out>;
134 };
135 };
136 };
137};
138
139&am43xx_pinmux {
140 matrix_keypad_pins: matrix_keypad_pins {
141 pinctrl-single,pins = <
142 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */
143 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */
144 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */
145 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */
146 >;
147 };
148
149 leds_pins: leds_pins {
150 pinctrl-single,pins = <
151 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */
152 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */
153 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */
154 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */
155 >;
156 };
157
158 i2c0_pins: i2c0_pins {
159 pinctrl-single,pins = <
160 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
161 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
162 >;
163 };
164
165 i2c1_pins: i2c1_pins {
166 pinctrl-single,pins = <
167 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
168 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
169 >;
170 };
171
172 mmc1_pins: pinmux_mmc1_pins {
173 pinctrl-single,pins = <
174 0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
175 0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
176 0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
177 0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
178 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
179 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
180 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
181 >;
182 };
183
184 ecap0_pins: backlight_pins {
185 pinctrl-single,pins = <
186 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
187 >;
188 };
189
190 edt_ft5306_ts_pins: edt_ft5306_ts_pins {
191 pinctrl-single,pins = <
192 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
193 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */
194 >;
195 };
196
197 vpfe0_pins_default: vpfe0_pins_default {
198 pinctrl-single,pins = <
199 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
200 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
201 0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/
202 0x1bc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/
203 0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
204 0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
205 0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
206 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
207 0x20c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
208 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
209 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
210 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
211 0x21c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
212 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
213 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
214 >;
215 };
216
217 vpfe0_pins_sleep: vpfe0_pins_sleep {
218 pinctrl-single,pins = <
219 0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
220 0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
221 0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
222 0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
223 0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
224 0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
225 0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
226 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
227 0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
228 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
229 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
230 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
231 0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
232 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
233 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
234 >;
235 };
236
237 cpsw_default: cpsw_default {
238 pinctrl-single,pins = <
239 /* Slave 1 */
240 0x12c (PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
241 0x114 (PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
242 0x128 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
243 0x124 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
244 0x120 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
245 0x11c (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
246 0x130 (PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
247 0x118 (PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
248 0x140 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
249 0x13c (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
250 0x138 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
251 0x134 (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
252
253 /* Slave 2 */
254 0x58 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
255 0x40 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
256 0x54 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
257 0x50 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
258 0x4c (PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
259 0x48 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
260 0x5c (PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
261 0x44 (PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
262 0x6c (PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
263 0x68 (PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
264 0x64 (PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
265 0x60 (PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
266 >;
267 };
268
269 cpsw_sleep: cpsw_sleep {
270 pinctrl-single,pins = <
271 /* Slave 1 reset value */
272 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
273 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
274 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
275 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
276 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
277 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
278 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
279 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
280 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
281 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
282 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
283 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
284
285 /* Slave 2 reset value */
286 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
287 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
288 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
289 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
290 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
291 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
292 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
293 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
294 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
295 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
296 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
297 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
298 >;
299 };
300
301 davinci_mdio_default: davinci_mdio_default {
302 pinctrl-single,pins = <
303 /* MDIO */
304 0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
305 0x14c (PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */
306 >;
307 };
308
309 davinci_mdio_sleep: davinci_mdio_sleep {
310 pinctrl-single,pins = <
311 /* MDIO reset value */
312 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
313 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
314 >;
315 };
316
317 dss_pins: dss_pins {
318 pinctrl-single,pins = <
319 0x020 (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
320 0x024 (PIN_OUTPUT | MUX_MODE1)
321 0x028 (PIN_OUTPUT | MUX_MODE1)
322 0x02c (PIN_OUTPUT | MUX_MODE1)
323 0x030 (PIN_OUTPUT | MUX_MODE1)
324 0x034 (PIN_OUTPUT | MUX_MODE1)
325 0x038 (PIN_OUTPUT | MUX_MODE1)
326 0x03c (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
327 0x0a0 (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */
328 0x0a4 (PIN_OUTPUT | MUX_MODE0)
329 0x0a8 (PIN_OUTPUT | MUX_MODE0)
330 0x0ac (PIN_OUTPUT | MUX_MODE0)
331 0x0b0 (PIN_OUTPUT | MUX_MODE0)
332 0x0b4 (PIN_OUTPUT | MUX_MODE0)
333 0x0b8 (PIN_OUTPUT | MUX_MODE0)
334 0x0bc (PIN_OUTPUT | MUX_MODE0)
335 0x0c0 (PIN_OUTPUT | MUX_MODE0)
336 0x0c4 (PIN_OUTPUT | MUX_MODE0)
337 0x0c8 (PIN_OUTPUT | MUX_MODE0)
338 0x0cc (PIN_OUTPUT | MUX_MODE0)
339 0x0d0 (PIN_OUTPUT | MUX_MODE0)
340 0x0d4 (PIN_OUTPUT | MUX_MODE0)
341 0x0d8 (PIN_OUTPUT | MUX_MODE0)
342 0x0dc (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */
343 0x0e0 (PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */
344 0x0e4 (PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */
345 0x0e8 (PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */
346 0x0ec (PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */
347
348 >;
349 };
350
351 qspi_pins: qspi_pins {
352 pinctrl-single,pins = <
353 0x7c (PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */
354 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
355 0x90 (PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
356 0x94 (PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
357 0x98 (PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */
358 0x9c (PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
359 >;
360 };
361
362 mcasp1_pins: mcasp1_pins {
363 pinctrl-single,pins = <
364 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
365 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
366 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
367 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
368 >;
369 };
370
371 lcd_pins: lcd_pins {
372 pinctrl-single,pins = <
373 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
374 >;
375 };
376
377 usb1_pins: usb1_pins {
378 pinctrl-single,pins = <
379 0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
380 >;
381 };
382
383 usb2_pins: usb2_pins {
384 pinctrl-single,pins = <
385 0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
386 >;
387 };
388};
389
390&i2c0 {
391 status = "okay";
392 pinctrl-names = "default";
393 pinctrl-0 = <&i2c0_pins>;
394 clock-frequency = <400000>;
395
396 tps@24 {
397 compatible = "ti,tps65218";
398 reg = <0x24>;
399 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
400 interrupt-controller;
401 #interrupt-cells = <2>;
402
403 dcdc1: regulator-dcdc1 {
404 compatible = "ti,tps65218-dcdc1";
405 /* VDD_CORE limits min of OPP50 and max of OPP100 */
406 regulator-name = "vdd_core";
407 regulator-min-microvolt = <912000>;
408 regulator-max-microvolt = <1144000>;
409 regulator-boot-on;
410 regulator-always-on;
411 };
412
413 dcdc2: regulator-dcdc2 {
414 compatible = "ti,tps65218-dcdc2";
415 /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
416 regulator-name = "vdd_mpu";
417 regulator-min-microvolt = <912000>;
418 regulator-max-microvolt = <1378000>;
419 regulator-boot-on;
420 regulator-always-on;
421 };
422
423 dcdc3: regulator-dcdc3 {
424 compatible = "ti,tps65218-dcdc3";
425 regulator-name = "vdds_ddr";
426 regulator-min-microvolt = <1500000>;
427 regulator-max-microvolt = <1500000>;
428 regulator-boot-on;
429 regulator-always-on;
430 };
431
432 dcdc4: regulator-dcdc4 {
433 compatible = "ti,tps65218-dcdc4";
434 regulator-name = "v3_3d";
435 regulator-min-microvolt = <3300000>;
436 regulator-max-microvolt = <3300000>;
437 regulator-boot-on;
438 regulator-always-on;
439 };
440
441 ldo1: regulator-ldo1 {
442 compatible = "ti,tps65218-ldo1";
443 regulator-name = "v1_8d";
444 regulator-min-microvolt = <1800000>;
445 regulator-max-microvolt = <1800000>;
446 regulator-boot-on;
447 regulator-always-on;
448 };
449
450 power-button {
451 compatible = "ti,tps65218-pwrbutton";
452 status = "okay";
453 interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
454 };
455 };
456
457 at24@50 {
458 compatible = "at24,24c256";
459 pagesize = <64>;
460 reg = <0x50>;
461 };
462};
463
464&i2c1 {
465 status = "okay";
466 pinctrl-names = "default";
467 pinctrl-0 = <&i2c1_pins>;
468 clock-frequency = <400000>;
469
470 edt-ft5306@38 {
471 status = "okay";
472 compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
473 pinctrl-names = "default";
474 pinctrl-0 = <&edt_ft5306_ts_pins>;
475
476 reg = <0x38>;
477 interrupt-parent = <&gpio0>;
478 interrupts = <31 0>;
479
480 reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
481
482 touchscreen-size-x = <480>;
483 touchscreen-size-y = <272>;
484 };
485
486 tlv320aic3106: tlv320aic3106@1b {
487 compatible = "ti,tlv320aic3106";
488 reg = <0x1b>;
489 status = "okay";
490
491 /* Regulators */
492 AVDD-supply = <&dcdc4>;
493 IOVDD-supply = <&dcdc4>;
494 DRVDD-supply = <&dcdc4>;
495 DVDD-supply = <&ldo1>;
496 };
497
498 lis331dlh@18 {
499 compatible = "st,lis331dlh";
500 reg = <0x18>;
501 status = "okay";
502
503 Vdd-supply = <&dcdc4>;
504 Vdd_IO-supply = <&dcdc4>;
505 interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
506 };
507};
508
509&epwmss0 {
510 status = "okay";
511};
512
513&ecap0 {
514 status = "okay";
515 pinctrl-names = "default";
516 pinctrl-0 = <&ecap0_pins>;
517};
518
519&gpio0 {
520 status = "okay";
521};
522
523&gpio1 {
524 status = "okay";
525};
526
527&gpio5 {
528 status = "okay";
529};
530
531&mmc1 {
532 status = "okay";
533 pinctrl-names = "default";
534 pinctrl-0 = <&mmc1_pins>;
535
536 vmmc-supply = <&dcdc4>;
537 bus-width = <4>;
538 cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
539};
540
541&usb2_phy1 {
542 status = "okay";
543};
544
545&usb1 {
546 dr_mode = "peripheral";
547 status = "okay";
548 pinctrl-names = "default";
549 pinctrl-0 = <&usb1_pins>;
550};
551
552&usb2_phy2 {
553 status = "okay";
554};
555
556&usb2 {
557 dr_mode = "host";
558 status = "okay";
559 pinctrl-names = "default";
560 pinctrl-0 = <&usb2_pins>;
561};
562
563&qspi {
564 status = "okay";
565 pinctrl-names = "default";
566 pinctrl-0 = <&qspi_pins>;
567
568 spi-max-frequency = <48000000>;
569 m25p80@0 {
570 compatible = "mx66l51235l";
571 spi-max-frequency = <48000000>;
572 reg = <0>;
573 spi-cpol;
574 spi-cpha;
575 spi-tx-bus-width = <1>;
576 spi-rx-bus-width = <4>;
577 #address-cells = <1>;
578 #size-cells = <1>;
579
580 /* MTD partition table.
581 * The ROM checks the first 512KiB
582 * for a valid file to boot(XIP).
583 */
584 partition@0 {
585 label = "QSPI.U_BOOT";
586 reg = <0x00000000 0x000080000>;
587 };
588 partition@1 {
589 label = "QSPI.U_BOOT.backup";
590 reg = <0x00080000 0x00080000>;
591 };
592 partition@2 {
593 label = "QSPI.U-BOOT-SPL_OS";
594 reg = <0x00100000 0x00010000>;
595 };
596 partition@3 {
597 label = "QSPI.U_BOOT_ENV";
598 reg = <0x00110000 0x00010000>;
599 };
600 partition@4 {
601 label = "QSPI.U-BOOT-ENV.backup";
602 reg = <0x00120000 0x00010000>;
603 };
604 partition@5 {
605 label = "QSPI.KERNEL";
606 reg = <0x00130000 0x0800000>;
607 };
608 partition@6 {
609 label = "QSPI.FILESYSTEM";
610 reg = <0x00930000 0x36D0000>;
611 };
612 };
613};
614
615&mac {
616 pinctrl-names = "default", "sleep";
617 pinctrl-0 = <&cpsw_default>;
618 pinctrl-1 = <&cpsw_sleep>;
619 dual_emac = <1>;
620 status = "okay";
621};
622
623&davinci_mdio {
624 pinctrl-names = "default", "sleep";
625 pinctrl-0 = <&davinci_mdio_default>;
626 pinctrl-1 = <&davinci_mdio_sleep>;
627 status = "okay";
628};
629
630&cpsw_emac0 {
631 phy_id = <&davinci_mdio>, <4>;
632 phy-mode = "rgmii";
633 dual_emac_res_vlan = <1>;
634};
635
636&cpsw_emac1 {
637 phy_id = <&davinci_mdio>, <5>;
638 phy-mode = "rgmii";
639 dual_emac_res_vlan = <2>;
640};
641
642&elm {
643 status = "okay";
644};
645
646&mcasp1 {
647 pinctrl-names = "default";
648 pinctrl-0 = <&mcasp1_pins>;
649
650 status = "okay";
651
652 op-mode = <0>;
653 tdm-slots = <2>;
654 serial-dir = <
655 0 0 1 2
656 >;
657
658 tx-num-evt = <1>;
659 rx-num-evt = <1>;
660};
661
662&dss {
663 status = "okay";
664
665 pinctrl-names = "default";
666 pinctrl-0 = <&dss_pins>;
667
668 port {
669 dpi_out: endpoint@0 {
670 remote-endpoint = <&lcd_in>;
671 data-lines = <24>;
672 };
673 };
674};
675
676&rtc {
677 status = "okay";
678};
679
680&wdt {
681 status = "okay";
682};
683
684&cpu {
685 cpu0-supply = <&dcdc2>;
686};
687
688&vpfe0 {
689 status = "okay";
690 pinctrl-names = "default", "sleep";
691 pinctrl-0 = <&vpfe0_pins_default>;
692 pinctrl-1 = <&vpfe0_pins_sleep>;
693
694 /* Camera port */
695 port {
696 vpfe0_ep: endpoint {
697 /* remote-endpoint = <&sensor>; add once we have it */
698 ti,am437x-vpfe-interface = <0>;
699 bus-width = <8>;
700 hsync-active = <0>;
701 vsync-active = <0>;
702 };
703 };
704};